Take a look at our
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message

701CS - CR2032 (non rechargable) - safe to use?

Older ThinkPads.. from the 600, the 7xx, the iSeries, 300, 500, the Transnote and, of course, the 701
Post Reply
Message
Author
A_random_doood
Posts: 5
Joined: Mon Sep 28, 2020 6:47 pm
Location: Sarajevo, Bosnia and Herzegovina

701CS - CR2032 (non rechargable) - safe to use?

#1 Post by A_random_doood » Wed Sep 30, 2020 11:08 am

I saw on a few blogs that people use CR2032 or a smaller one as a CMOS replacement battery.

However, as far as I know and I read in this post: viewtopic.php?t=126703, the 701C / CS will try recharging it?

So how are the people using CR2032 then?

Also the diode solution works, but all diodes have a voltage drop. I could use a germanium diode with a 0.2V drop, but then its gonna be providing 2.8V to the board instead of 3V.

Thinkpad4by3
Senior ThinkPadder
Senior ThinkPadder
Posts: 2670
Joined: Sun Aug 09, 2015 9:25 am
Location: N. Bellmore, ny

Re: 701CS - CR2032 (non rechargable) - safe to use?

#2 Post by Thinkpad4by3 » Wed Sep 30, 2020 2:26 pm

0.2V is idealistically high, assume 0.5 minimum, closer to 0.7.

Use 3x 1.5 LR44 and a 0.7v silicon diode.
Thinkpad4by3's Law of the Universe.

The efficiency of two screens equally sized with equal numbers if pixels are equal. The time spent by a 4:3 user complaining about 16:9 is proportional to the inefficiency working with a 16:9 display, therefore the amount of useful work extracted is equal.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad Legacy Hardware”

Who is online

Users browsing this forum: No registered users and 15 guests