win 2000 pro...wont load.....TP 600x.....starts then dies

Message

ibe555666 · #1 Post by **ibe555666** » Sun Oct 30, 2005 11:04 am

ok....TP600 with win 200 pro....starts up, run through that its loading, when it reaches end just about to open, it reverts back to a reboot, and just does this in circles by itself, wont get past there......does offer F8 to troubleshoot etc, but none of the options there seem to work....as in prompt , safe mode etc....tried to do last configuartion with no luck....any ideas??? dont have the 2000 pro recover disc.....do have the ibm disk with win 95, but it wont accept that even to redo the laptop with 95....help please.

#2 Post by **GomJabbar** » Sun Oct 30, 2005 11:36 am

If you can boot up into Safe Mode, try running System File Checker.

You can try going into the BIOS setup menu and running system diagnostics. With the laptop powered off, press the power button, then press the F1 key about once a second until you get into the BIOS.

MadeInJapan · #3 Post by **MadeInJapan** » Sun Oct 30, 2005 3:52 pm

Funny that you posted this exact problem. Not sure if it's a virus or tons of spyware, but I have run accross this issue 4 times this past week on our studetns' laptops. Nothing I would do would work. Thought it was bad memory, then CMOS battery, etc. Does not seem to be hardware related.

One of the systems pushing F8 during boot up and then selecting "previously successful boot" or something like that was the answer.
On the others, I still couldn't get the systems to boot. Finally took the HDD out of the laptop and put it into a 2nd HDD adapter, and inserted into my T30. Did a virus scan (only one of the laptops had a virus), but running spyware scans with both Spybot Search and Destroy and Adaware showed many spywares. I cleaned them off, did a defrag on the drives and also did a "disk check," what used to be sandisk with older systems and re-fitted the HDD back into the original laptop and had no trouble booting it up. Just thought I would share my experience here.

ibe555666 · #4 Post by **ibe555666** » Mon Oct 31, 2005 3:59 pm

ok...i can get into bios and do a check but doesnt help.....any ideas to get to dos prompt and maybe get a disk scan or possibly pc doc or something else??? or any other ideas???

#5 Post by **GomJabbar** » Mon Oct 31, 2005 5:22 pm

You can get to a DOS prompt using the Windows Startup floppy disks, which you can make with any Windows system. You can also get to a DOS prompt by booting up a Windows install CD.

If you have a Norton Antivirus CD, you can boot up from that and do a virus scan (although the virus signatures would be out of date).

ibe555666 · #6 Post by **ibe555666** » Mon Oct 31, 2005 5:29 pm

grrrrr.....ok got system to install win xp....when it goes to reboot, freezes ....now i did a complete install of win xp.....why it still freeze at start up...and i cant get to do anything from there, like safe mode,last config,dos prompt???? any clues????

#7 Post by **GomJabbar** » Mon Oct 31, 2005 6:50 pm

Make sure you have the latest BIOS update. I see also that you can download PC-Doctor for DOS and Windows. Download the bootable version of PC-Doctor and run the diagnostics. All of the above from the following link.

Software and Device Drivers - ThinkPad 600

leon55 · #8 Post by **leon55** » Mon Oct 31, 2005 10:00 pm

Hi
try downloading the Hiren Boot Cd
http://62.253.162.10/hiren.thanki/

then run scandisk or checkdisk

ibe555666 · #9 Post by **ibe555666** » Tue Nov 01, 2005 9:06 am

ok next....with recover disk in...i can get an A: or R: prompt...cant get any other...any suggestions to go from there???? cant get C: etc....would R: be from the recovery disk, maybe get diagnostics through there??? thanks

win 2000 pro...wont load.....TP 600x.....starts then dies

win 2000 pro...wont load.....TP 600x.....starts then dies

Who is online