Page 1 of 1
16 colors suck
Posted: Tue Nov 22, 2005 10:03 pm
by therigwelder
i just put this 600e together and i cannot figure out the display,ive got 2 choices 2 color and 16 color @ 640 x 480.
can i get true color or at least 256?
Posted: Tue Nov 22, 2005 11:16 pm
by tfflivemb2
Which OS are you using?
If you are using Windows, then you need to download the display drivers from the IBM Site:
http://www-307.ibm.com/pc/support/site. ... SHY-3Y5LVT
You can also use the site to download all of the other drivers that you need. You can even find Linux drivers, if you aren't using Windows.
Posted: Sun Dec 11, 2005 8:36 pm
by therigwelder
i went to the posted address and downloaded the display drivers,however that didnt work.when i enter the bios and run the test on the display it tests okay showing all color and resolutions
Posted: Sun Dec 11, 2005 9:41 pm
by pkiff
Three questions:
1. First a repeat question: Which OS are you using?
2. Do you know if the laptop was working correctly before you installed whatever OS you are using?
3. Did you follow the install instructions for the video adapter driver?
Phil.
Posted: Sun Dec 11, 2005 10:18 pm
by GomJabbar
When you download drivers from IBM's site, generally there is a 2-step process to install them.
General driver instructions below (some drivers have different instructions).
1. After downloading the file, double-click on it to execute it. This will put the driver files in the appropriate installation directories. Pay attention to where they will be copied to.
2. Go to the directory where the installation files were placed and double-click on Setup.exe to install the files.
When installing video drivers, you generally need to make sure you are using the Standard VGA driver first. Check in device manager. After changing to the Standard VGA driver, reboot. Go into device manager, open display adapters, double-click on your display adapter, go to the driver tab, choose update driver. When wizard runs, point it to the directory where the files were saved as mentioned above. Choose the appropriate display adapter driver (you need to know what you have).
All the above are general instructions. The best advice is to do what pkiff said: "follow the install instructions for the video adapter driver". [These are in the readme file which you can download with the driver file].