570 lcd
570 lcd
hello,
as i broke the lcd on my 570 (13.3 inch) I´m looking
for an new one. There are several 13.3 displays for a couple of models... does a 13.3 from a 390, 600 or 7xx fit in a 570? as the cable
still works it´s just a matter of the connector on the lcd. does anyone know if there are lcds from other models working as well??
thanks
barnane
as i broke the lcd on my 570 (13.3 inch) I´m looking
for an new one. There are several 13.3 displays for a couple of models... does a 13.3 from a 390, 600 or 7xx fit in a 570? as the cable
still works it´s just a matter of the connector on the lcd. does anyone know if there are lcds from other models working as well??
thanks
barnane
-
tfflivemb2
- Moderator1

- Posts: 5532
- Joined: Thu Sep 01, 2005 1:17 pm
- Location: Wisconsin
- Contact:
-
BillMorrow
- *Senior* Admin

- Posts: 7155
- Joined: Tue Apr 13, 2004 9:40 pm
- Location: San Francisco -> Florida -> Georgia
- Contact:
i don't think the panel will work from anything but a 600 or 570..
but the HMM will tell THAT tale..
but if it were me seeking a panel replacement i would look for one that would bolt up without taking it out of the top housing..
but the HMM will tell THAT tale..
but if it were me seeking a panel replacement i would look for one that would bolt up without taking it out of the top housing..
Bill Morrow, kept by parrots
& cockatoos
Sysop - forum.thinkpads.com
*
She was not what you would call refined,
She was not what you would call unrefined,
She was the type of person who kept a parrot.
~~~Mark Twain~~~
Sysop - forum.thinkpads.com
*
She was not what you would call refined,
She was not what you would call unrefined,
She was the type of person who kept a parrot.
~~~Mark Twain~~~
This may be a good option for you because all you have to do is swap the entire top.
X32/2.0GHZ/2GB/ENGENIUS EMP-8602+S 600mw mini pci/WD 250GB
X60/1.83GHZ/2GB/Atheros/7K100
X60/1.83GHZ/2GB/Atheros/7K100
Hello,
thanks for all your quick replies! If I got you right, the lcd from a 13.3 inch TP600 should work in my 570? Has anyone ever prooved that?
I don´t mind to change the lcd, as it´s less work than changing the entire top...
So, anyone ´s got a working lcd for me? If so, how much including shipping to Germany?
Thanks
barnane
thanks for all your quick replies! If I got you right, the lcd from a 13.3 inch TP600 should work in my 570? Has anyone ever prooved that?
I don´t mind to change the lcd, as it´s less work than changing the entire top...
So, anyone ´s got a working lcd for me? If so, how much including shipping to Germany?
Thanks
barnane
proved for the 13.3 display that it won`t fit :(
connectors on the backside of the panel are of different size,
just tried to connect a 600e lcd, 13.3, fru 05K9346(broken but still in function) to a 570 13.3 cable.
having changed several 600 series 13.3 displays ,
afair they all have the same connector on the backside.
display cable connectors on the 570 + 600 mobo for 13.3 are also different
(btw, 600 has different mobo`s for different lcd`s/resolutions)
regards tom_k
connectors on the backside of the panel are of different size,
just tried to connect a 600e lcd, 13.3, fru 05K9346(broken but still in function) to a 570 13.3 cable.
having changed several 600 series 13.3 displays ,
afair they all have the same connector on the backside.
display cable connectors on the 570 + 600 mobo for 13.3 are also different
(btw, 600 has different mobo`s for different lcd`s/resolutions)
regards tom_k
Maybe try this
I bought a screen for my 570 from them and although I have not installed it yet, they were kind enough to sell it to an unlisted shipping-destination (note how Germany is listed !) and it arrived quickly, safely packed and the screen looked very good -from what you can tell about an uninstalled part, of course)
I bought a screen for my 570 from them and although I have not installed it yet, they were kind enough to sell it to an unlisted shipping-destination (note how Germany is listed !) and it arrived quickly, safely packed and the screen looked very good -from what you can tell about an uninstalled part, of course)
Thinkpads: 570 2644-1AK, 570 2644-3BG, 570 2644-1AU (broken), T23 2647-4MU, T30 2366-AG8, T43 2669-CTO.
@RfromR
thanks for your advice but fortunately, I found a display from Germany for about 20Euros (which is about 25USD) including shipping.
Must arrive theses days. And I ´ll get a 570E with a defective backlight for about 45USD. The backlight of the broken lcd still works, so I just have to change...
By the way, international shipping is that expensive...
saw so many nice things on ebay.com but amazing expensive counting all costs together
Regards
Arne
thanks for your advice but fortunately, I found a display from Germany for about 20Euros (which is about 25USD) including shipping.
Must arrive theses days. And I ´ll get a 570E with a defective backlight for about 45USD. The backlight of the broken lcd still works, so I just have to change...
By the way, international shipping is that expensive...
saw so many nice things on ebay.com but amazing expensive counting all costs together
Regards
Arne
True...I am economical only when it comes to purchasing price.
Because when the item arrives I get so enthousiastic about it, that I lose that sense and often spend the same amount or more to repair its flaws.
Anyways, good luck with your backlight replacement.
Because when the item arrives I get so enthousiastic about it, that I lose that sense and often spend the same amount or more to repair its flaws.
Anyways, good luck with your backlight replacement.
Thinkpads: 570 2644-1AK, 570 2644-3BG, 570 2644-1AU (broken), T23 2647-4MU, T30 2366-AG8, T43 2669-CTO.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 4 Replies
- 1115 Views
-
Last post by J Walker
Sun Feb 19, 2017 7:32 pm
-
- 2 Replies
- 928 Views
-
Last post by J Walker
Tue Mar 21, 2017 10:18 am
-
- 2 Replies
- 433 Views
-
Last post by PRAGUEGUY
Tue Jan 03, 2017 7:18 am
-
-
Favorite 4:3 LCD is damaged NEC MultiSync LCD1765
by excal32 » Sun Jan 08, 2017 8:13 pm » in Off-Topic Stuff - 8 Replies
- 712 Views
-
Last post by Puppy
Tue Jan 10, 2017 8:59 am
-
Who is online
Users browsing this forum: No registered users and 4 guests




