Page 1 of 1
TP 600E CPU 750 MHz upgrade problem
Posted: Fri Sep 29, 2006 4:06 am
by harald612
Hello,
I have upgraded my TP 600E to 750 MHz. After I turned it on, lights are going on, fan spins, but the screen doesn't come on. No beep, nothing on the screen!
Then I have done BIOS upgrade. No success!
I plugged / unplugged the new CPU several times, but it doesn't work. No success!
I disabled 32 MB internal memory. No success!
Any advice is welcome!
Posted: Fri Sep 29, 2006 5:50 am
by tfflivemb2
What is the part number off of the CPU?
Posted: Fri Sep 29, 2006 6:08 am
by harald612
Part number: PMM75002101AA
Re: TP 600E CPU 750 MHz upgrade problem
Posted: Fri Sep 29, 2006 8:07 am
by cmarti
harald612 wrote:
Then I have done BIOS upgrade. No success!
I plugged / unplugged the new CPU several times, but it doesn't work. No success!
I disabled 32 MB internal memory. No success!
If you reinstall the old cpu the machine works? Did you try that?
The PIII CPU could be DOA.
Posted: Fri Sep 29, 2006 11:15 am
by harald612
Yes, if I reinstall the old CPU, the TP works! Seems the CPU is dead.
But the lights are on and the fan works. Maybe this is not under CPU control?
Posted: Fri Sep 29, 2006 12:52 pm
by cmarti
harald612 wrote:
But the lights are on and the fan works. Maybe this is not under CPU control?
Same thing happened to me when i upgraded a 390X the lights were on and the fan runs but nothing more.
Ask for a replacement from the seller the processor must be toasted.
Posted: Sat Sep 30, 2006 2:43 am
by harald612
cmarti wrote:
Ask for a replacement from the seller the processor must be toasted.
Thank you, for the confirmation!