TN whines when Huawei e620 datacard inserted
Posted: Fri Nov 24, 2006 6:03 pm
Transnote with w2ksp4
Drivers are installed by
Vodafone Mobile Connect Dashboard software
previous to card being inserted.
When the card is inserted,
it begins loading the various drivers,
but hangs and emits a "you're hurting me" tone.
If the card is removed,
the system sometimes recovers, but not always.
I've been through Voda support,
and they've contacted huawei,
but they've essentially given up
and documented a mysterious hardware incompatibility situation.
An Option umts card works fine, so the slot's generally OK.
Hauwei firmware is latest.
Was told on transnote.us forum that
a Novatel card will work,
but Vodafone Ireland only deal in the Hauwei
or a new Hauwei usb 'modem'
(which I suspect is usb2 only).
I'd like to get this one working if possible.
How might I determine exactly what's happening,
or has someone had a similar experience
(with a solution!)
Thanks.
Drivers are installed by
Vodafone Mobile Connect Dashboard software
previous to card being inserted.
When the card is inserted,
it begins loading the various drivers,
but hangs and emits a "you're hurting me" tone.
If the card is removed,
the system sometimes recovers, but not always.
I've been through Voda support,
and they've contacted huawei,
but they've essentially given up
and documented a mysterious hardware incompatibility situation.
An Option umts card works fine, so the slot's generally OK.
Hauwei firmware is latest.
Was told on transnote.us forum that
a Novatel card will work,
but Vodafone Ireland only deal in the Hauwei
or a new Hauwei usb 'modem'
(which I suspect is usb2 only).
I'd like to get this one working if possible.
How might I determine exactly what's happening,
or has someone had a similar experience
(with a solution!)
Thanks.