Page 1 of 1
Upgrading CPU on TP 600 question
Posted: Sun Oct 31, 2004 12:29 am
by Milton Miller
I have a TP 600 2645-35U that I upgraded th HHD to 10 gb and is running fine on Win 2000. I recently got from a friend a 333hz CPU out of a 600E. Is it possible to replace the 233hz CPU that is in mine with this one or not. I don’t want to open the case and try until I know if it will work.
Posted: Sun Oct 31, 2004 7:35 am
by carbon_unit
THe original 600 series uses an MMC1 cpu while the 600e uses an MMC2 cpu. In other words: No, you can't use it because the connectors are different.
If you find an MMC1 cpu up to 400 mhz you can use it. I put a 366 mhz in mine and the difference is quite noticable.
Posted: Sun Oct 31, 2004 1:06 pm
by Milton Miller
Thank you for the quick response. I will look around and see if I can locate a MMC1 CPU.
Posted: Sun Oct 31, 2004 2:06 pm
by ndoggfromhell
there was a guy on eBay selling them in the US... they weren't cheap, around $70.00 i believe, but they were brand new. I bought one and I have no regrets. Make sure you get a processor with the cache on-die! The ones with cache on the pcb won't recognize right in the laptop. I have a 300mhz with on-pcb cache and it never worked right in my 770 (suspect it would behave the same in a 600).
Goodluck