How to open CD drawer before Windows boots??

Older ThinkPads.. from the 600, the 7xx, the iSeries, 300, 500, the Transnote and, of course, the 701
Post Reply
Message
Author
sarakay
Posts: 22
Joined: Fri Aug 10, 2007 8:09 pm
Location: Toms River, NJ

How to open CD drawer before Windows boots??

#1 Post by sarakay » Mon Dec 10, 2007 2:55 pm

This is a dumb question but here goes ... how can I open the CD drawer before Windows boots up? It won't open when the laptop is off. I'd like to put my livecd of [censored] Small Linux in there and boot from it. Right now I am booting into Windows, inserting the livecd, then rebooting.

Thanks,
Sara

rkawakami
Admin
Admin
Posts: 10053
Joined: Sun Jun 04, 2006 1:26 am
Location: San Jose, CA 95120 USA
Contact:

#2 Post by rkawakami » Mon Dec 10, 2007 3:23 pm

Most CD and DVD drives have an emergency eject hole somewhere on the front panel. Look for a tiny hole, about the size of a paper clip in diameter. Take a straightened out paper clip and carefully insert it into the hole and gently push. You should only have to put in about 1/4" to 1/2".
Ray Kawakami
X22 X24 X31 X41 X41T X60 X60s X61 X61s X200 X200s X300 X301 Z60m Z61t Z61p 560 560Z 600 600E 600X T21 T22 T23 T41 T60p T410 T420 T520 W500 W520 R50 A21p A22p A31 A31p
NOTE: All links to PC-Doctor software hosted by me are dead. Files removed 8/28/12 by manufacturer's demand.

andyP
**SENIOR** Member
**SENIOR** Member
Posts: 821
Joined: Tue Dec 27, 2005 10:56 am
Location: Ratingen, Germany
Contact:

#3 Post by andyP » Mon Dec 10, 2007 3:30 pm

If ever I need to put a cd in before booting, I just press F1 for bios, (or F12 on newer TPs), open the drive, slip the cd in and restart.
T61p 6460-67G; 15,4 WSXGA+ W7P x64, no hairdryer.
T43p 2668-G2G, 14,1 SXGA+, XP Pro, internal hairdryer
T23 2647-9LG, 14,1 SXGA+, XP Pro, no hairdryer

jdhurst
Admin
Admin
Posts: 5831
Joined: Thu Apr 29, 2004 6:49 am
Location: Toronto, Canada

#4 Post by jdhurst » Mon Dec 10, 2007 7:41 pm

On a machine with the F12 function, there is no need to restart. Start the machine, press F12 immediately and probably two or three times until it provides the DOS start menu. Open the CD drawer, insert the CD, close it and select Boot from CD. It should boot (works for me). ... JDH

sarakay
Posts: 22
Joined: Fri Aug 10, 2007 8:09 pm
Location: Toms River, NJ

#5 Post by sarakay » Mon Dec 10, 2007 9:15 pm

Thank you!

Sara

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad Legacy Hardware”

Who is online

Users browsing this forum: No registered users and 5 guests