Page 1 of 1
Locked out of 380D BIOS-Please Help
Posted: Mon Dec 06, 2004 7:28 pm
by robin_d
When I boot up holding down the F1 key I go right into Windows . I have installed more Ram memory
but memory check still shows the same amount of memory as I had before. I have installed a Bios update to this machines newest Bios. Do I need to get into Bios for it to detect the new memory?
I appreciate any and all help.
Thanks :shock:
Posted: Mon Dec 06, 2004 7:43 pm
by AlphaKilo470
First, make sure you are holding the F1 key down while you turn the computer on and hold until you get the setup screen, don't wait untill after the machine is on, you'll hit the F1 key too late. Also, make sure the RAM you installed is PC66 compatible and EDO. It also has to be 64mb or less, anything above a 64mb chip will not work in a ThinkPad 380.
Locked out of 380D BIOS-Please Help
Posted: Tue Dec 07, 2004 10:45 am
by robin_d
Thank you,your advice got me into BIOS.
Now that I can test the new memory, it comes up with the following.
(1) Next to the memory icon is a Red X
(2)Below the icon are the following in Red Letters-------->
(A) DEV 002
(B) ERR 83
(C) FRU 2010
Your help is greatly appreciated.
Posted: Tue Dec 07, 2004 4:35 pm
by AlphaKilo470
Glad I helped you with the BIOS.
Now, I've had those error codes that you mentioned on my laptop one time when I tired upgrading the RAM. If I'm not mistaken, I beleive that means your computer does not support the RAM you installed.
How big is the RAM chip you are trying to install and is it PC66 compatible?
Locked out of 380D BIOS-Please Help
Posted: Wed Dec 08, 2004 10:51 pm
by robin_d
the module is 64Mb. i've tried to get as much info as i can, which really isn't much but i think it's pc100. it's a samsung (k4e640812d-tc50/tl50).
thanks for your help.
Posted: Thu Dec 16, 2004 9:53 pm
by MadeInJapan
Check this page...it says that it is Samsung 128mb...if so, that's why it's not working:
http://www.vikinginterworks.com/products/intsrvr_nx.asp