Replace the FHD display with a QHD(non-touch) on X1C 2015

X1/X1C series specific matters only
Post Reply
Message
Author
om26er
Posts: 2
Joined: Wed Oct 14, 2015 2:38 pm
Location: Multan, Pakistan

Replace the FHD display with a QHD(non-touch) on X1C 2015

#1 Post by om26er » Wed Oct 14, 2015 2:49 pm

I recently imported a refurbished by manufacturer X1C 2015, the FHD version and the screen is awfully bad. I have been using laptops for a long time and I am not sure how a company can put such a bad display on a laptop of 2015. Maybe its a problem with my hardware ?

The screen has a yellow taint over it, the brightness is not consistent, i.e. the lower part of the screen is relatively brighter than the upper. So I am wondering if there is a way I can buy the QHD display and replace that on this machine. Is it even possible to do that, have anyone tried that before, any information in that regard would be really helpful.

Or if someone with the FHD version of the same laptop could help me verify if its an issue with my laptop's screen or a general issue with the laptop.

BillMorrow
*Senior* Admin
*Senior* Admin
Posts: 7153
Joined: Tue Apr 13, 2004 9:40 pm
Location: San Francisco -> Florida -> Georgia
Contact:

Re: Replace the FHD display with a QHD(non-touch) on X1C 2015

#2 Post by BillMorrow » Wed Oct 14, 2015 5:43 pm

i have a touch version of the X1 carbon, ver. 2 with the touch strip..
my display is just plain super..
in fact if it were not for the non-standard keyboard the X1 carbon would be my all time favorite thinkpad..

i have not heard of any bad displays on current X1's..
i would look to your vendor for a replacement..

shipping to pakistan has GOT to be expensive so i would ask the vendor to cover your shipping as well..
Bill Morrow, kept by parrots :parrot: & cockatoos
Sysop - forum.thinkpads.com

*
She was not what you would call refined,
She was not what you would call unrefined,
She was the type of person who kept a parrot.
~~~Mark Twain~~~

om26er
Posts: 2
Joined: Wed Oct 14, 2015 2:38 pm
Location: Multan, Pakistan

Re: Replace the FHD display with a QHD(non-touch) on X1C 2015

#3 Post by om26er » Thu Oct 15, 2015 7:16 am

BillMorrow wrote:i have a touch version of the X1 carbon, ver. 2 with the touch strip..
my display is just plain super..
in fact if it were not for the non-standard keyboard the X1 carbon would be my all time favorite thinkpad..

i have not heard of any bad displays on current X1's..
i would look to your vendor for a replacement..

shipping to pakistan has GOT to be expensive so i would ask the vendor to cover your shipping as well..
Thanks for your response, While it does help a bit to assure that my screen might be broken at the same time I want to make sure that I hear from the X1C 3rd Gen. FHD user about the display before I order a replacement screen and do it myself.

I am even wondering if its possible to put a QHD display on this one, looking at the disassembly both FHD and QHD are eDP with similar connector.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad X1/X1C”

Who is online

Users browsing this forum: No registered users and 1 guest