Take a look at our
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message

Case That Props up a Lenovo TAB3 8

ThinkPad/Ideapad Slate Tablet, Tablet 2, Miix etc.
Post Reply
Message
Author
ZaZ
moderator
moderator
Posts: 4506
Joined: Fri May 13, 2005 1:33 pm
Location: Minnesota

Case That Props up a Lenovo TAB3 8

#1 Post by ZaZ » Tue Jul 18, 2017 4:18 am

Someone asked me to take a look for a case that props up a Lenovo TAB3 8. Since the TAB3 8 is from 2015, there's not much specifically made for the TAB3 left. I was wondering if anyone had an idea for a case? Thanks for any help.
ProBook 470 G3

Thinkpad4by3
ThinkPadder
ThinkPadder
Posts: 1245
Joined: Sun Aug 09, 2015 9:25 am
Location: N. Bellmore, ny

Re: Case That Props up a Lenovo TAB3 8

#2 Post by Thinkpad4by3 » Wed Jul 26, 2017 8:50 pm

ZaZ wrote:
Tue Jul 18, 2017 4:18 am
Someone asked me to take a look for a case that props up a Lenovo TAB3 8. Since the TAB3 8 is from 2015, there's not much specifically made for the TAB3 left. I was wondering if anyone had an idea for a case? Thanks for any help.
3D printing in a flexible material? I've 3D printed phone cases before.
Just collecting vintage machines....Thinkpads included.
Have: IBM PC 5150, Tandy 1400LT, Macintosh Portable, Metalis 286(dead), Satellite 200CDS, TP 755C&CDV , 701C, Slimsport 286(deadish/zombie).
New: TI Travelmate 4000E 4/25, AMREL SLT486 (4DX2/66)

ZaZ
moderator
moderator
Posts: 4506
Joined: Fri May 13, 2005 1:33 pm
Location: Minnesota

Re: Case That Props up a Lenovo TAB3 8

#3 Post by ZaZ » Thu Jul 27, 2017 12:34 am

I think the printer will cost a lot more than a suitable case.
ProBook 470 G3

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad/Ideapad Tablets & Convertibles”

Who is online

Users browsing this forum: No registered users and 7 guests