Take a look at our
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message

How do I Install Win 8.0 Pro

Windows 8 on ThinkPads
Post Reply
Posts: 29
Joined: Sun Mar 23, 2014 8:11 am
Location: Sankt Augustin, Germany

How do I Install Win 8.0 Pro

#1 Post by warp4dennis » Sun Jan 04, 2015 1:49 pm

I'm trying to install Win 8.0 Pro on my ThinkPad T60 it hangs saying that My PC has a problem and needs to restart. And it says further that it's collecting some error data but doesn't tell me where to find this file.
Has anybody had this problem and know how get out of this hole?

Posts: 10135
Joined: Sun Jun 04, 2006 1:26 am
Location: San Jose, CA 95120 USA

Re: How do I Install Win 8.0 Pro

#2 Post by rkawakami » Sun Jan 04, 2015 8:00 pm

I don't have any experience with Win8 but can offer a few suggestions which might help answer your questions...

- Was the T60 running a previous version of Windows okay? If you were getting hangs or errors, then there might be some hardware issue. At the very least I'd run memory and hard drive diagnostics before attempting to load a new OS.
- Did you completely wipe the hard drive before trying to install Windows? Most of the install problems I've seen with previous versions of Windows occurred because there was already a bootable Windows OS on the drive. Wiping the disk before running the install is the best thing to do.
- From what source are you loading Windows 8 from? A full retail disk, an upgrade, from a download, etc.?
- Is there any error code(s) displayed? I'm assuming you are getting a "blue screen" and if so, there's usually some sort of hex code (e.g., 0x00000001).
- Where exactly in the install process does the system "hang" or display the error message? In the middle? At the end?
- After you get the error message and the system restarts, does it get stuck in a loop and do the same thing again?
- Can you boot the system in Safe Mode? Assuming that most or all of the install completed, pressing F8 during the boot sequence will do this under previous versions of Windows so I'm assuming the Win8 is the same.
Ray Kawakami
X22 X24 X31 X41 X41T X60 X60s X61 X61s X200 X200s X300 X301 Z60m Z61t Z61p 560 560Z 600 600E 600X T21 T22 T23 T41 T60p T410 T420 T520 W500 W520 R50 A21p A22p A31 A31p
NOTE: All links to PC-Doctor software hosted by me are dead. Files removed 8/28/12 by manufacturer's demand.

Posts: 29
Joined: Sun Mar 23, 2014 8:11 am
Location: Sankt Augustin, Germany

Re: How do I Install Win 8.0 Pro

#3 Post by warp4dennis » Wed Feb 04, 2015 2:52 pm

1.) This ThinkPad T60 did have WinXP up and running on it. I then found a much bigger HDD and installed it in the T60. I then installed Win 7 and have gotten the bugs out of it so everything that I use at least function without any error messages.
2.) I did wipe the newer HDD before I installed Win 7. The newer HDD is a Seagate Momentus ST9750420as that has 4Gbits/s(?).
3.) Windows 8.0 Pro is from an MS CD/DVD.
4.) MS has been kind to the user by not using any error codes. They spell out the error in plain english. "Driver IRQL not less or equal (ataport.sys). Windows couldn't load correctly."
5.) The error comes at the very end, which is about an hour and 20 minutes later.
6.) I does not get stuck in a loop. Instead you are offered three choices. A. Windows 8.0; B. (Safe Mode); C. Windows 7.
7.) I think choice B. is Safe Mode but I'm not sure. Since choice B. was not on my wish list I didn't go there. And if I did go there, I wouldn't know what I should do. I'm a PC user, not a Computer guru!


Post Reply
  • Similar Topics
    Last post

Return to “Windows 8”

Who is online

Users browsing this forum: No registered users and 4 guests