I have a T430 and its been a wonderful machine so far, until I noticed that the left hinge started to get loose. I dismantled the screen bezel and noticed that the knurled brass threaded inserts/nuts (I'm not sure what Lenovo call these) have popped out of the plastic hole. The nuts no longer "bite" the plastic and just spins when I attempt to screw the screws back. Please see photos: http://cubeupload.com/im/4hzqyu.jpg and this http://cubeupload.com/im/EDGKBs.jpg
I've researched on how to fix this and I am seeing various methods. Some use strong epoxy glue but others use something like a plastic repair kit such as "Plast-Aid". Others have simply used longer screws and screwed through the plastic cover and used a nut on the outside to secure it in place. I think this last method is a bit extreme and something I don't want to do. So far it seems my options are as follows:
1. Buy a new/refurbished lid
2. Source new brass inserts (does anyone know the size of these?)
3. Use strong glue
4. Mod the lid and use longer screws
Apart from option 1, which is the next best method? I am personally tending towards option 2 but I do not know the right size or if they are even available or will work. I've looked at the maintence manual and can see that the screws are M2.5mm. So I would assume the knurled nuts would be of similar size?
- Posts: 1790
- Joined: Mon May 28, 2012 5:49 am
- Location: Metro Manila, Philippines
Backup: X220 4291-P79 i5-2520M
Toy: X60/s Frankenpad Core Solo U1300
In pieces: two retired but working X61Ts
RIP: 760XD 9546-U9E, X61 T7500
You could also use Gorilla Glue, but be careful that the screw holes in the brass inserts stay 'clear' of glue.
There's a lid with hinges, antenna wires, LCD-cable etc. on eBay: http://www.ebay.co.uk/itm/232453356988
Check out The Boardroom for Parts, Mods and Other Services.
But widen your knowledge by downloading the HMMs (and fru_bom list from T/W/Xx30 onward) from all Thinkpads that interest you.
That's why we have that HMM link at the top of each webpage!
- Similar Topics
- Last post
Who is online
Users browsing this forum: No registered users and 9 guests