USB-c charging, what wattage/voltage is needed?

Large picture files of Retro system may be posted here but please try to limit them to <200KB
Post Reply
Message
Author
Olangu
Posts: 20
Joined: Fri Feb 13, 2015 6:56 am
Location: Stockholm, Sweden

USB-c charging, what wattage/voltage is needed?

#1 Post by Olangu » Thu Oct 12, 2017 5:55 am

Hi all!

Do anyone have any information on how much wattage or voltage a USB-c charger needs to produce for the TP25 to start charging on it.
I don't care how slow it charges or if it have to be off to charge. Looking to have the smallest possible charger for my phone and laptop while on the road.

My phone charger at 18W (9V, 2A) is not enough from my tries.

Might it be that the voltage must exceed the battery voltage?
That a 27W (15V, 1.8A) will work but a 27W (9V, 3A) will not?
https://en.wikipedia.org/wiki/USB#Power ... y_.28PD.29

The USB-c standard is a complete mess. One port that have so many different profiles...

Thankful for any help!

Thinkpad4by3
ThinkPadder
ThinkPadder
Posts: 1146
Joined: Sun Aug 09, 2015 9:25 am
Location: N. Bellmore, ny

Re: USB-c charging, what wattage/voltage is needed?

#2 Post by Thinkpad4by3 » Thu Oct 12, 2017 2:23 pm

Now about instead of blowing up your T25, why not use this: https://www.amazon.com/Lizone-40000mAh- ... B015TMJAW2
Welcome to the jungle, we have FrankenPads
If you want it you're going to bleed, but that is the price to pay
And you're a very rare mobo, very hard to get
You can see the blinky lights, but you won't get them for free.

Olangu
Posts: 20
Joined: Fri Feb 13, 2015 6:56 am
Location: Stockholm, Sweden

Re: USB-c charging, what wattage/voltage is needed?

#3 Post by Olangu » Thu Oct 12, 2017 2:58 pm

I'm not looking for a power bank.
I want to know what USB-c spec is needed to charge the TP25 over the USB-c port.

theterminator93
Senior Member
Senior Member
Posts: 865
Joined: Fri Oct 11, 2013 7:45 pm
Location: Avon Lake, Ohio, United States

Re: USB-c charging, what wattage/voltage is needed?

#4 Post by theterminator93 » Thu Oct 12, 2017 3:02 pm

Lenovo's own USB-C charger for the T470 is 20V at 2.25A.
Daily: T25 | W520 i7-2860QM·Quadro 2000m·IPS FHD | T420 i7-2640M·NVS 4200m·IPS FHD | X220 i7-2640M | T601F T9900·NVS 140M·IPS UXGA
Wife's: T61p T9500·2010 FX570m·WUXGA | X220T i7-2640M
Others: T61p·61·43·42p|X41T·24·23·22|G41|A31p·22m|i1200|TransNote|380D|365XD|701C|755C

NonesensE
Freshman Member
Posts: 94
Joined: Mon May 29, 2017 6:28 am
Location: GF/BS/OHA, Germany

Re: USB-c charging, what wattage/voltage is needed?

#5 Post by NonesensE » Thu Oct 12, 2017 3:57 pm

The battery connector on the T470 is the same as on all other thinkpads since 200x and supports 3 and 4 cells in series, so although all available batteries for the T470 are 10.8V, it supports 14.4V batteries as well. And the charging circuit behind the connector does this, too. Now those voltages are nominal voltages, the nominal voltage of a lithium ion battery is 3.7V. The full charge voltage however is approx. 4.2V, so when fully charged, the thinkpad batteries reach 12.6V and 16.8V, respectively. This means, as long as they don't incoprorate a boost converter, the thinkpad needs 20V to feed the power circuit. This is the same voltage the classic chargers deliver and thus the easiest to integrate.
Sometimes coming over from the German forum...
X62s 3rd batch, [s]T61[/s] T70 14" 4:3 1st batch

w0qj
Senior Member
Senior Member
Posts: 697
Joined: Fri Jun 11, 2004 9:53 pm
Location: Hong Kong

Re: USB-c charging, what wattage/voltage is needed?

#6 Post by w0qj » Fri Oct 13, 2017 1:48 am

Wow, congrads on your TP25 ;)

Think of the TP25 as a T470 (which it was based upon), and read up on T470 hands on review especially regarding charging your laptop.

For example:
www.notebookcheck.net/Lenovo-ThinkPad-T ... 130.0.html

~USB-C chargers for T470 (presumably same for TP25) comes in 65W and 45W varities.
~Strongly recommend get that 65W USB-C charger as it also supports Rapid Charge technology (Power Deliver 2.0).
(Caveat: USB-C chargers are slightly slower that the traditional rectangular-tipped 65W chargers, but only if you use a timer to time the difference).
Last edited by w0qj on Fri Oct 13, 2017 7:01 am, edited 1 time in total.
Daily Driver: X1 Carbon 4th Gen (X1C4): i7-6600U 2.6GHz; 16GB DDR3 1866 MHz; 1TB PCIe-NVMe SSD; 14" WQHD 2560x1440; LTE EM7455 Mobile Broadband; Win7 Pro 64bit
Current Thinkpads: X1C4 | X1C3 | X250 | X230 | T410
Retired Thinkpads: T42 | 560 (circa 1996)
~~IBM Thinkpad era computer bag !

Olangu
Posts: 20
Joined: Fri Feb 13, 2015 6:56 am
Location: Stockholm, Sweden

Re: USB-c charging, what wattage/voltage is needed?

#7 Post by Olangu » Fri Oct 13, 2017 3:10 am

NonesensE wrote:
Thu Oct 12, 2017 3:57 pm
The battery connector on the T470 is the same as on all other thinkpads since 200x and supports 3 and 4 cells in series, so although all available batteries for the T470 are 10.8V, it supports 14.4V batteries as well. And the charging circuit behind the connector does this, too. Now those voltages are nominal voltages, the nominal voltage of a lithium ion battery is 3.7V. The full charge voltage however is approx. 4.2V, so when fully charged, the thinkpad batteries reach 12.6V and 16.8V, respectively. This means, as long as they don't incoprorate a boost converter, the thinkpad needs 20V to feed the power circuit. This is the same voltage the classic chargers deliver and thus the easiest to integrate.
What you are saying is that with the 10.8V batteries a 15V charges might still be able to charge it at full speed (unless there's a limit on the current).
w0qj wrote:
Fri Oct 13, 2017 1:48 am
Wow, congrads on your TP25 ;)

Think of the TP25 as a T470 (which it was based upon), and read up on T470 hands on review especially regarding charging your laptop.

For example:
www.notebookcheck.net/Lenovo-ThinkPad-T ... 130.0.html

~USB-C chargers for T470 (presumably same for TP25) comes in 65W and 45W varities.
~Strongly recommend get that 65W USB-C charger as it also supports Rapid Charge technology (Power Deliver 2.0).
(Caveat: USB-C chargers are slightly slower that the traditional rectangular 65W chargers, but only if you use a timer to time the difference).
Thank you!
I'm actually liking it more and more.

I read up on the T470-45W charger, it is specced at:
Power output ranges:
20V 2.25A
15V 3A
9V 2A
5V 2A

Now I really feel the urge to try out charging with a 15V charger. Going to call my friends with fruit computers, see if anyone is sitting on the 29W charger (14.5V, 2A).

NonesensE
Freshman Member
Posts: 94
Joined: Mon May 29, 2017 6:28 am
Location: GF/BS/OHA, Germany

Re: USB-c charging, what wattage/voltage is needed?

#8 Post by NonesensE » Fri Oct 13, 2017 3:50 am

Olangu wrote:
Fri Oct 13, 2017 3:10 am
What you are saying is that with the 10.8V batteries a 15V charges might still be able to charge it at full speed (unless there's a limit on the current).
In theory, yes, but probably not with the thinkpad charging circuit, that's what I'm saying. However, until someone tries, we won't know for sure.
Now I really feel the urge to try out charging with a 15V charger. Going to call my friends with fruit computers, see if anyone is sitting on the 29W charger (14.5V, 2A).
Good luck!
Sometimes coming over from the German forum...
X62s 3rd batch, [s]T61[/s] T70 14" 4:3 1st batch

marsman2020
Posts: 10
Joined: Wed Oct 09, 2013 6:52 pm
Location: Greater Los Angeles, CA

Re: USB-c charging, what wattage/voltage is needed?

#9 Post by marsman2020 » Sun Oct 15, 2017 8:39 pm

You'll need a charger that supports USB Power Delivery and can negotiate up to at least the 15V voltage and preferrably the 20V voltage. Something in 45W-65W range - 45W might not charge while running in all circumstances, the TP25 ships with a 65W adapter.

I'd be very careful with this. As you may have already seen, USB-C is kind of a cluster@$@$ right now and there are cables and chargers out there that can literally fry your devices.

There is a table of devices that have been independently tested at - https://docs.google.com/spreadsheets/d/ ... X8/pubhtml#

I might try this - https://www.anker.com/products/variant/ ... -/A2053111 - which is 45W.
En Route: TP25
Current Daily Driver: Helix (1st Gen)
Classic Collection: 340, 701CS, X31

Olangu
Posts: 20
Joined: Fri Feb 13, 2015 6:56 am
Location: Stockholm, Sweden

Re: USB-c charging, what wattage/voltage is needed?

#10 Post by Olangu » Tue Oct 17, 2017 3:50 am

NonesensE wrote:
Fri Oct 13, 2017 3:50 am
Olangu wrote:
Fri Oct 13, 2017 3:10 am
What you are saying is that with the 10.8V batteries a 15V charges might still be able to charge it at full speed (unless there's a limit on the current).
In theory, yes, but probably not with the thinkpad charging circuit, that's what I'm saying. However, until someone tries, we won't know for sure.
Now I really feel the urge to try out charging with a 15V charger. Going to call my friends with fruit computers, see if anyone is sitting on the 29W charger (14.5V, 2A).
Good luck!
I was in a store yesterday and was able to try the apple chargers. The 29W one did not work, but the higher power ones did. My conclusion is that the TP25 probably needs 20V to be able to charge.

Olangu
Posts: 20
Joined: Fri Feb 13, 2015 6:56 am
Location: Stockholm, Sweden

Re: USB-c charging, what wattage/voltage is needed?

#11 Post by Olangu » Tue Oct 17, 2017 3:54 am

marsman2020 wrote:
Sun Oct 15, 2017 8:39 pm
You'll need a charger that supports USB Power Delivery and can negotiate up to at least the 15V voltage and preferrably the 20V voltage. Something in 45W-65W range - 45W might not charge while running in all circumstances, the TP25 ships with a 65W adapter.

I'd be very careful with this. As you may have already seen, USB-C is kind of a cluster@$@$ right now and there are cables and chargers out there that can literally fry your devices.

There is a table of devices that have been independently tested at - https://docs.google.com/spreadsheets/d/ ... X8/pubhtml#

I might try this - https://www.anker.com/products/variant/ ... -/A2053111 - which is 45W.
I'm currently eyeing this charger:
http://www.ebay.com/itm/87W-USB-C-Type- ... 1438.l2649

Nice selection of ports, good price and a lovely form factor.

marsman2020
Posts: 10
Joined: Wed Oct 09, 2013 6:52 pm
Location: Greater Los Angeles, CA

Re: USB-c charging, what wattage/voltage is needed?

#12 Post by marsman2020 » Tue Oct 17, 2017 10:19 am

Olangu wrote:
Tue Oct 17, 2017 3:54 am
marsman2020 wrote:
Sun Oct 15, 2017 8:39 pm
You'll need a charger that supports USB Power Delivery and can negotiate up to at least the 15V voltage and preferrably the 20V voltage. Something in 45W-65W range - 45W might not charge while running in all circumstances, the TP25 ships with a 65W adapter.

I'd be very careful with this. As you may have already seen, USB-C is kind of a cluster@$@$ right now and there are cables and chargers out there that can literally fry your devices.

There is a table of devices that have been independently tested at - https://docs.google.com/spreadsheets/d/ ... X8/pubhtml#

I might try this - https://www.anker.com/products/variant/ ... -/A2053111 - which is 45W.
I'm currently eyeing this charger:
http://www.ebay.com/itm/87W-USB-C-Type- ... 1438.l2649

Nice selection of ports, good price and a lovely form factor.
Nope, no way I'd plug that into my machine. That's a knockoff of the Apple 87W charger.

A USB-C Power Delivery charger is a 'smart' device with much more complexity than a simple 5V charger or even a single-voltage laptop charger. It has to be able to negotiate pairs of voltage and currents - 5V, 9V, 15V, 20V - before it delivers any power. If something goes wrong it needs to be able to turn itself off before it delivers too much voltage and/or current and damages the device it plugs into.

Here's some fun videos:
https://www.youtube.com/watch?v=SjeZB12985c
https://www.youtube.com/watch?v=9FZltqOaiOA
En Route: TP25
Current Daily Driver: Helix (1st Gen)
Classic Collection: 340, 701CS, X31

chx1975
Freshman Member
Posts: 84
Joined: Thu Mar 24, 2011 6:44 pm
Location: Vancouver, Canada

Re: USB-c charging, what wattage/voltage is needed?

#13 Post by chx1975 » Sat Nov 11, 2017 1:40 pm

It has to be able to negotiate pairs of voltage and currents - 5V, 9V, 15V, 20V
Has to? Nope. Look at the Nintendo Switch forums, tons of chargers are not compatible because they do not deliver 15V. Power Delivery is a very flexible standard and the charger tells the system what it does and what it doesn't support.

To charge the T25 you need 20V, period. Any amperage will charge the laptop switched off. The only question I would have is whether a 29W charger is enough to keep the laptop ticking. Someone reported using a 45W to charge while using the laptop with the caveat of not testing the dGPU at all so just 29W might be enough to keep the lights on even if the battery doesn't charge.

w0qj
Senior Member
Senior Member
Posts: 697
Joined: Fri Jun 11, 2004 9:53 pm
Location: Hong Kong

Re: USB-c charging, what wattage/voltage is needed?

#14 Post by w0qj » Mon Nov 13, 2017 7:57 am

If one uses a non-ThinkPad USB-C charger and it wrecks your (expensive) ThinkPad, think this voids your warranty.
Therefore only use ThinkPad USB-C chargers if you really have to, for the sake of your warranty.
(You still can use the traditional ThinkPad rectangular charging pin ones on all ThinkPads).

Until USB-C chargers of any maker can be used to charge your ThinkPad, then I'll avoid it with a 10-foot pole.
The USB-C charging "standard" is just not mature yet.
You are the white lab rat.

Personally, I suspect that by the time this USB-C charging situation becomes universal (ie: USB-C chargers of any maker can be used to charge your ThinkPad),
by that time I would suspect that something a USB-D charging port of different shape would be introduced.
(So as to steer clear of incompatible USB-C chargers that may ruin your ThinkPad). ymmv
Daily Driver: X1 Carbon 4th Gen (X1C4): i7-6600U 2.6GHz; 16GB DDR3 1866 MHz; 1TB PCIe-NVMe SSD; 14" WQHD 2560x1440; LTE EM7455 Mobile Broadband; Win7 Pro 64bit
Current Thinkpads: X1C4 | X1C3 | X250 | X230 | T410
Retired Thinkpads: T42 | 560 (circa 1996)
~~IBM Thinkpad era computer bag !

marsman2020
Posts: 10
Joined: Wed Oct 09, 2013 6:52 pm
Location: Greater Los Angeles, CA

Re: USB-c charging, what wattage/voltage is needed?

#15 Post by marsman2020 » Thu Nov 30, 2017 1:37 am

There are certainly reputable USB-PD chargers that follow the spec properly and autonegoatiate the way they are supposed to out there. I just don't think that a random Chinese knockoff is one of them, and I'd want to see some testing by one of the savvy USB-C early adopters before I used a 3rd party charger on my new TP25.

I ordered the official Lenovo 65W USB-C charger for $37 on sale with Black Friday pricing. So I'll use that for an USB-C charging needs in the future.
En Route: TP25
Current Daily Driver: Helix (1st Gen)
Classic Collection: 340, 701CS, X31

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “T25-Retro Support”

Who is online

Users browsing this forum: No registered users and 1 guest