dvd-ram with W98SE

Message

Nicola · #1 Post by **Nicola** » Sun Aug 31, 2014 6:25 am

Where I can download the driver for the Panasonic burner (Lenovo) UJ-862 for W98SE?

dr_st · #2 Post by **dr_st** » Sun Aug 31, 2014 9:59 am

Are you sure you need it? You tried it and it does not work?

Nicola · #3 Post by **Nicola** » Tue Sep 02, 2014 6:25 am

No, it works. But I would like the feature that makes it work like a floppy disk.

dr_st · #4 Post by **dr_st** » Tue Sep 02, 2014 8:38 am

Are you using it with DVD-RAM media or DVD-RW/+RW media?

#5 Post by **rkawakami** » Tue Sep 02, 2014 5:05 pm

My guess is that the OP is looking for the old (and buggy) utility called Drive Letter Access. It's one of the first things I delete when installing from the recovery disks

. A quick look at the support site for older systems seems to say that DLA was replaced by DragToDisc. If you really want it, go to the soon-to-be-deleted Support site:

http://support1.lenovo.com/en_US/resear ... PAD-MATRIX

ref: http://en.wikipedia.org/wiki/Drive_Letter_Access

Nicola · #6 Post by **Nicola** » Sat Sep 06, 2014 5:40 am

How floppy disks, you can only use DVD-RAM!
The DLA has nothing to do.

dr_st · #7 Post by **dr_st** » Sat Sep 06, 2014 7:06 am

For DVD-RAM with Win9x, try this:
http://download.viglen.co.uk/files/Opti ... X306NE.EXE

Documentation:
ftp://ftp.panasonic.com/pub/panasonic/d ... 11.W9X.pdf

Nicola · #8 Post by **Nicola** » Sun Sep 07, 2014 10:54 am

The recorder is on another computer. When I have time, I will try this software.
I tell you one thing, from an Italian computer forum, I had already downloaded the latest drivers for dvd-ram that contains
Mkeram.vxd ver. 3.04.00
Mkeudf.vxd ver. 4.11.00
In your software (9X306NE.EXE)
Mkeram.vxd ver. 2.01.00
Mkeudf.vxd ver. 3.06.00

The Italian software is more updated, however it crashes right away and I can't try it.
For this I will try yours and then I'll let you know. However, if you are a more updated, write it here.

Nicola · #9 Post by **Nicola** » Sat Sep 13, 2014 11:12 am

I have installed your version. But at the beginning it was wrong. Then I tried to install my version and the my upgrade version. But both told me to uninstall the version on your computer. Strange, my second, an update, did not want your old. After a while started to work, yours, and now I'm good to go.
Thank you very much!

dr_st · #10 Post by **dr_st** » Sat Sep 13, 2014 12:51 pm

Glad that it worked in the end.

Will be useful to know in case someone else needs a similar setup.

Thanks for letting us know.

dvd-ram with W98SE

dvd-ram with W98SE

Re: dvd-ram with W98SE

Re: dvd-ram with W98SE

Re: dvd-ram with W98SE

Re: dvd-ram with W98SE

Re: dvd-ram with W98SE

Who is online