Take a look at our
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message
Windows 98 Install Help
-
- Posts: 28
- Joined: Tue Oct 16, 2018 11:18 pm
- Location: whitewater, wi
Windows 98 Install Help
I recently acquired an IBM ThinkPad 365xd that is in good condition. It boots and all but gives errors along the way, and is registered to someone else. So I planned on reinstalling it with a CD Iso I downloaded. I haven't installed it before but I cleared the hard drive. I didn't format it by mistake and restarted. Now I cannot do anything or even access command prompt. Can I fix this and install?
Re: Windows 98 Install Help
Does this model allow you to boot from CD-ROM? If not, you need to create/obtain a Win98 startup floppy, boot from that, then install from the CD.
Thinkpad 25 (20K7), T490 (20N3), Yoga 14 (20FY), T430s (IPS FHD + Classic Keyboard), X220 4291-4BG
X61 7673-V2V, T60 2007-QPG, T42 2373-F7G, X32 (IPS Screen), A31p w/ Ultrabay Numpad
X61 7673-V2V, T60 2007-QPG, T42 2373-F7G, X32 (IPS Screen), A31p w/ Ultrabay Numpad
-
- Posts: 28
- Joined: Tue Oct 16, 2018 11:18 pm
- Location: whitewater, wi
Re: Windows 98 Install Help
Considering it only has CD-rom I though it would but it asks for floppy. Also the CD-rom seems to not be working as it just sits there then eventually doesn't eject. I have a Gateway Solo that allows it though and has a floppy drive.
Re: Windows 98 Install Help
It's been years since my doing so, but when I wanted to install Win98 on old machines that would not boot the install media, I would attach the HDD to another computer to format, copy system files and the cab files, then move the drive back into the old Thinkpad, boot up and run setup from the command prompt.
Collection = T430 - T500 - R400 - X300 - T61 (14" WXGA+) - R61 (15" SXGA+) - T60 - X40 - T43p - T43 - T42p - A30P
-
- Posts: 28
- Joined: Tue Oct 16, 2018 11:18 pm
- Location: whitewater, wi
Re: Windows 98 Install Help
I put the HDD into the gateway solo but cannot access anything. Does the install floppy or disk do format as well? Is a floppy disk simply required to install?
Re: Windows 98 Install Help
Yes, I'm fairly sure you can format and all booted from the install CD. Back in the day, I did not have a bootable CD so a Win98 Start Up floppy worked best for me. Boot the floppy and format HDD, then copy system files from floppy to HDD so it will be bootable, make a directory to contain the cab files and copy them from CD to HDD while booted from floppy. Reboot into DOS on the HDD and run Windows set up back on the old ThinkPad. There used to be a more detailed guide online somewhere, but I can't find it now. I'll look a little further for the guide later.
Collection = T430 - T500 - R400 - X300 - T61 (14" WXGA+) - R61 (15" SXGA+) - T60 - X40 - T43p - T43 - T42p - A30P
-
- Posts: 28
- Joined: Tue Oct 16, 2018 11:18 pm
- Location: whitewater, wi
Re: Windows 98 Install Help
I will order a boot floppy tommorow. Gotta hope the floppy drive still works as its unknown whether or not it does.
Re: Windows 98 Install Help
Here is the guide I was looking for: http://holland-consulting.net/9xinstall.html
It's probably over twenty years old, but the method worked for me several times in the past.
It's probably over twenty years old, but the method worked for me several times in the past.
Collection = T430 - T500 - R400 - X300 - T61 (14" WXGA+) - R61 (15" SXGA+) - T60 - X40 - T43p - T43 - T42p - A30P
-
- Posts: 28
- Joined: Tue Oct 16, 2018 11:18 pm
- Location: whitewater, wi
Re: Windows 98 Install Help
I put the floppy in after setting boot and nothing. Drive makes little noises then says "Operating system not found".
-
- Posts: 28
- Joined: Tue Oct 16, 2018 11:18 pm
- Location: whitewater, wi
-
- Posts: 28
- Joined: Tue Oct 16, 2018 11:18 pm
- Location: whitewater, wi
Re: Windows 98 Install Help
I had to turn it to CD-ROM instead of A: for some reason. After this it booted fine.
-
- Posts: 28
- Joined: Tue Oct 16, 2018 11:18 pm
- Location: whitewater, wi
Re: Windows 98 Install Help
So it wont let me boot without the hard drive inside the system, no matter what I change. Without the hard drive theres nothing to format... I tried looking through the guide but I cant even get past step 2 as it automatically loads the CD-ROM drivers and of course no hard drive.
-
- Posts: 28
- Joined: Tue Oct 16, 2018 11:18 pm
- Location: whitewater, wi
Re: Windows 98 Install Help
Never mind, it was the dvd drive all along. I managed to swap it with an earlier model ibm thinkpad cd-rom and the setup from the disc I downloaded worked perfectly. It formatted the drive and I started install. Thanks for the help.
-
- Similar Topics
- Replies
- Views
- Last post
-
-
not able to install windows in t410
by Madmadytriesfixinghislap » Thu Nov 30, 2023 3:46 am » in ThinkPad T400/T410/T420 and T500/T510/T520 Series - 5 Replies
- 2125 Views
-
Last post by David C
Mon Dec 11, 2023 8:45 pm
-
-
-
Can't install Windows XP
by Gonzaleitor » Thu Jan 25, 2024 1:24 pm » in ThinkPad T40/T41/T42/T43 Series - 12 Replies
- 1522 Views
-
Last post by Gonzaleitor
Sat Jan 27, 2024 1:18 pm
-
-
-
You can no longer install Windows 10 with a 7/8 key
by mikemex » Fri Feb 02, 2024 11:14 pm » in Windows 10/11/etc. - 1 Replies
- 721 Views
-
Last post by RealBlackStuff
Sat Feb 03, 2024 1:14 am
-
-
-
HELP! I Cant access BIOS menu during windows 11 start
by canonmasta » Mon Dec 04, 2023 5:07 pm » in ThinkPad X230-X280 / X390 Series - 5 Replies
- 3400 Views
-
Last post by Brad
Sat Dec 16, 2023 6:40 am
-
Who is online
Users browsing this forum: No registered users and 23 guests