Page 1 of 1

Active Protection System P52

Posted: Sun Nov 10, 2019 3:02 am
by Horror981
Good afternoon.
I own a Tninkpad p52 laptop.
While Windows was installed from the factory, I had an APS system displayed and it could be turned on and off.
After reinstalling the windows, the APS disappeared and the driver cannot be downloaded for it.
The only thing I found on the forum is lenovo https://support.lenovo.com/us/en/downloads/ds014892, but when installing these drivers, an error occurs about the device mismatch.
What to do How to make the system work?
We’ve already discussed something similar, only unlike me, the discs were changed there, I didn’t change. https://forums.lenovo.com/t5/ThinkPad-P ... -p/4214887

Re: Active Protection System P52

Posted: Sun Nov 10, 2019 3:39 am
by dr_st
Welcome to the forum. :)

Does your P52 have a mechanical hard drive? If not, you do not need APS.

Re: Active Protection System P52

Posted: Sun Nov 10, 2019 3:42 am
by RealBlackStuff
If you don't have a HDD and have SSD instead, you don't need APS at all.

Re: Active Protection System P52

Posted: Sun Nov 10, 2019 4:07 am
by Horror981
dr_st wrote:
Sun Nov 10, 2019 3:39 am
Welcome to the forum. :)

Does your P52 have a mechanical hard drive? If not, you do not need APS.
Yes, he has HHD. And before reinstalling this system worked. I even checked if I ran the movie hosted on the HDD and picked up the laptop, then the movie stopped for the time that the hdd stopped.

Re: Active Protection System P52

Posted: Sun Nov 10, 2019 4:08 am
by Horror981
RealBlackStuff wrote:
Sun Nov 10, 2019 3:42 am
If you don't have a HDD and have SSD instead, you don't need APS at all.
I have ssd and hdd