Take a look at our
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message
P50 - 2tb NVME - temperature
P50 - 2tb NVME - temperature
Lenovo p50. i76820hq, 32gb, nvidia quadro m2000m 4gb, 256gb - upgraded to 2 tb ssd + 2tb hdd
Original system drive - 256 Samsung ssd M2 has been changed to Adata legend 2tb nvme ssd
(There is another 2tb hdd beside that.)
The heatsink given with the SSD cant fit into SSD caddy.
After switching on smart info shows 50+ C degree, after 10 minutes its about 50 C degree.
Should I worry about 50C degree when its in idle state?
After copying from ssd to ssd some files, in 2 minutes the temperature went up to 70C Degree.
Any idea how could I install the original Adata heatsink, or any other option for cooling?
Original system drive - 256 Samsung ssd M2 has been changed to Adata legend 2tb nvme ssd
(There is another 2tb hdd beside that.)
The heatsink given with the SSD cant fit into SSD caddy.
After switching on smart info shows 50+ C degree, after 10 minutes its about 50 C degree.
Should I worry about 50C degree when its in idle state?
After copying from ssd to ssd some files, in 2 minutes the temperature went up to 70C Degree.
Any idea how could I install the original Adata heatsink, or any other option for cooling?
-
- Admin Emeritus
- Posts: 23837
- Joined: Mon Sep 18, 2006 5:17 am
- Location: Loch Garman, Éire
Re: P50 - 2tb NVME - temperature
You'll need to modify the heatsink or rather: the caddy, so that the heatsink will fit.
Without it, that SSD will soon overheat.
By the looks of it, the caddy is made of plastic, so shouldn't be too difficult.
Without it, that SSD will soon overheat.
By the looks of it, the caddy is made of plastic, so shouldn't be too difficult.
Lovely day for a Guinness! (The Real Black Stuff)
Re: P50 - 2tb NVME - temperature
Thank you!
I found this:
https://www.thingiverse.com/thing:4655509
and this:
https://www.thingiverse.com/thing:5025243
Do you think, any of theese would be good instead?
I found this:
https://www.thingiverse.com/thing:4655509
and this:
https://www.thingiverse.com/thing:5025243
Do you think, any of theese would be good instead?
-
- Admin Emeritus
- Posts: 23837
- Joined: Mon Sep 18, 2006 5:17 am
- Location: Loch Garman, Éire
Re: P50 - 2tb NVME - temperature
That 4655509 makes a lot of sense, plenty room for cooling.
You could make that yourself out of a piece of wood (probably using a longer screw to make things easier).
You could make that yourself out of a piece of wood (probably using a longer screw to make things easier).
Lovely day for a Guinness! (The Real Black Stuff)
Re: P50 - 2tb NVME - temperature
RealBlackStuff: thank you for your advice. It took some time, to get it printed.
What do you think the original heatsink that comes with the ssd is enough?
AXAGON CLR-M2L3 Heatsink for M.2 SSD would fit in the P50.
(My concern: if I install the original, and its not enoug, how to remove it. )
What do you think the original heatsink that comes with the ssd is enough?
AXAGON CLR-M2L3 Heatsink for M.2 SSD would fit in the P50.
(My concern: if I install the original, and its not enoug, how to remove it. )
-
- Admin Emeritus
- Posts: 23837
- Joined: Mon Sep 18, 2006 5:17 am
- Location: Loch Garman, Éire
Re: P50 - 2tb NVME - temperature
If that SSD came with that cooler, I'm sure it has been tested to properly work.
I don't have anything like that, but it shouldn't be difficult to (dis)assemble that cooler to the SSD.
Just check that there is enough room for it.
If the mounting tabs fail/brake, you could probably use some cable ties/zip ties.
I don't have anything like that, but it shouldn't be difficult to (dis)assemble that cooler to the SSD.
Just check that there is enough room for it.
If the mounting tabs fail/brake, you could probably use some cable ties/zip ties.
Lovely day for a Guinness! (The Real Black Stuff)
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Crucial P3 Plus 4TB NVME on Thinkpad P1 Gen 6 issue
by Powergrade » Fri Dec 01, 2023 12:33 am » in ThinkPad P1/P40/P50/P70 and later Series - 2 Replies
- 3579 Views
-
Last post by Powergrade
Sun Dec 03, 2023 8:02 pm
-
-
-
Confused what NVME adapter is compatible with my Lenovo Thinkpad T480
by Cyber Akuma » Sat Dec 30, 2023 7:32 pm » in ThinkPad T430-T490 / T530-T590 Series - 1 Replies
- 2233 Views
-
Last post by RealBlackStuff
Sun Dec 31, 2023 1:17 am
-
-
-
NVME Boot On ThinkPad T43
by TPFanatic » Tue Jan 23, 2024 6:34 pm » in ThinkPad T40/T41/T42/T43 Series - 2 Replies
- 954 Views
-
Last post by axur-delmeria
Tue Jan 23, 2024 10:55 pm
-
-
-
FS: 128GB NVME 2242 - FRU: 00UP730 (1 picture included)
by coolnose » Fri Mar 08, 2024 8:21 am » in Marketplace - Forum Members only - 0 Replies
- 279 Views
-
Last post by coolnose
Fri Mar 08, 2024 8:21 am
-
Who is online
Users browsing this forum: No registered users and 10 guests