Xubuntu on Thinkpad 600: Sluggish and dragging
Posted: Mon Dec 10, 2007 10:38 am
Hi all
So I decided to install Xubuntu 7.10 (alternate install CD) on a Thinkpad 600 because it is more lightweight than the normal Ubuntu distros.
While the Installation went fine after two attempts (disabling ethernet) and managed to display the screen in XGA, the system itself is just slow, sluggish and dragging.
The Thinkpad 600 has a 300 Mhz Pentium II CPU and 224 Mbyte RAM available which to me is supposed to be quite a nifty performance for low resource requirements operating systems.
Opening a simple thing like a terminal window takes a whooping 5 seconds!! And after entering an command it takes about 2 secs to start executing it. Not to mention opening Open Office, it takes about 30s. Scrolling up and down a text document in Open Office is sluggish well it's all just too slow for being a PII 300 Mhz.
I was wondering what tweaks there are? And what I could add/alter for the NeoMagic Graphics adapter in the xorg.conf file in case the graphics accelerator would not be used properly?
Another issue I wonder about the performance is if the memory would cause that; I have two banks of 128 Mbyte @100Mhz, the notebook having already 32 Mbyte built in and its memory being clocked @66 Mhz otherwise, it subtracts the 32 from the total 256 extension built in. So it has 224 Mbyte availabe instead; if this would cause the sluggishness for any reasons?
Any help and advices are greatly appreciated.
So I decided to install Xubuntu 7.10 (alternate install CD) on a Thinkpad 600 because it is more lightweight than the normal Ubuntu distros.
While the Installation went fine after two attempts (disabling ethernet) and managed to display the screen in XGA, the system itself is just slow, sluggish and dragging.
The Thinkpad 600 has a 300 Mhz Pentium II CPU and 224 Mbyte RAM available which to me is supposed to be quite a nifty performance for low resource requirements operating systems.
Opening a simple thing like a terminal window takes a whooping 5 seconds!! And after entering an command it takes about 2 secs to start executing it. Not to mention opening Open Office, it takes about 30s. Scrolling up and down a text document in Open Office is sluggish well it's all just too slow for being a PII 300 Mhz.
I was wondering what tweaks there are? And what I could add/alter for the NeoMagic Graphics adapter in the xorg.conf file in case the graphics accelerator would not be used properly?
Another issue I wonder about the performance is if the memory would cause that; I have two banks of 128 Mbyte @100Mhz, the notebook having already 32 Mbyte built in and its memory being clocked @66 Mhz otherwise, it subtracts the 32 from the total 256 extension built in. So it has 224 Mbyte availabe instead; if this would cause the sluggishness for any reasons?
Any help and advices are greatly appreciated.