GRUB errors after installing Rescue & Recovery within XP

Solaris, RedHat, FreeBSD and the like
Post Reply
Message
Author
zygomorph
Posts: 6
Joined: Wed Sep 10, 2008 9:23 pm
Location: Berkeley, CA

GRUB errors after installing Rescue & Recovery within XP

#1 Post by zygomorph » Fri Jun 04, 2010 1:30 pm

I have a dual-boot system (XP Pro & Karmic Koala) on an R61i. I had a fan error which I think has been resolved, but I wanted to run some of the diagnostics in Rescue & Recovery just in case, so I installed that from XP. (I haven't really gotten to using Linux at all - I installed it and then forgot about it for the most part.)

When I restarted as part of the R&R installation, I got the words "GRUB" and a flashing cursor. That's it. When I restart, I get the same thing - so I can't boot into either OS. I can get into the BIOS by pressing the blue ThinkVantage button, though.

What should I do? I also don't have the XP install disc I used when setting up the dual - boot (yeah, bad planning...)

I also asked about this on Ubuntu forums (https://answers.launchpad.net/ubuntu/+question/113497) but I thought someone here might have gone through this already and have a more exact answer. Sadly, I'm still pretty unfamiliar with Linux, so if anyone can explain what to do with good detail that would be really great.

I saw a similar issue somewhere where people suggested following the instructions at https://help.ubuntu.com/community/Recov ... ingWindows, but it sounds like he still had to mess with it a bit.

Thanks...

Harryc
Moderator Emeritus
Moderator Emeritus
Posts: 13228
Joined: Thu Apr 12, 2007 8:23 am
Location: Upstate New York

Re: GRUB errors after installing Rescue & Recovery within XP

#2 Post by Harryc » Fri Jun 04, 2010 9:14 pm

I've been at this GRUB error spot before although I got there by different means. The only easy way out for me was to boot ActiveKillDisk from a CD and write all zeros to the drive, then start from scratch installing the R&R environment using the recovery CD set.

tom lightbody
Junior Member
Junior Member
Posts: 334
Joined: Fri Jul 07, 2006 1:07 am
Location: cleveland

Re: GRUB errors after installing Rescue & Recovery within XP

#3 Post by tom lightbody » Sat Jun 05, 2010 9:45 am

did you try booting with an MS-DOS bootdisk, and
issuing command "fdisk /mbr"?
the way up and the way down are the same (heraclitus)

control
Freshman Member
Posts: 68
Joined: Tue Sep 08, 2009 2:37 am
Location: tacoma, wa

Re: GRUB errors after installing Rescue & Recovery within XP

#4 Post by control » Sun Jun 06, 2010 12:08 am

tom lightbody wrote:did you try booting with an MS-DOS bootdisk, and
issuing command "fdisk /mbr"?
That'll work but I believe that'll get rid of grub and you can't boot into linux anymore.
You can grab a live disk, boot into it, and reinstall grub, so you can get your dual-boot back.
What this will do for R&R, I don't know, getting them to work together might be hard to figure out.

mediasponge
Junior Member
Junior Member
Posts: 286
Joined: Mon Oct 22, 2007 5:57 pm
Location: Milpitas, CA

Re: GRUB errors after installing Rescue & Recovery within XP

#5 Post by mediasponge » Wed Sep 15, 2010 5:53 pm

There are numerous boot CDs you can get for free that will allow you to "fix" the MBR. At least then you will have XP back. You can also get a Linux Live CD and reinstall GRUB, as indicated.

I've used this one on several machines:
http://www.ubcd4win.com/index.htm

This recovery disk is well rated, I plan to try it next:
http://www.tux.org/pub/people/kent-robo ... linux/rip/
A31p: 2653-N5U, 1.7GHz, 1.5GB, 320GB (upgr), CDRW/DVD, Win XP-Pro SP3
X41: 2528-5FU, 1.5 Ghz, 2GB, 40GB, Win XP-Pro SP3

moronoxyd
Sophomore Member
Posts: 127
Joined: Sun Aug 20, 2006 10:49 am
Location: Berlin, Germany

Re: GRUB errors after installing Rescue & Recovery within XP

#6 Post by moronoxyd » Fri Sep 17, 2010 8:49 am

R&R probably wrote over some parts of the bootsector where GRUB stores some data needed to boot into GRUB.

What you need to do now is restore that. No need to reinstall everythink.
One way to do that: http://www.sorgonet.com/linux/grubrestore/
IBM ThinkPad R61 | IBM ThinkPad X60 | IBM ThinkPad X32 | IBM ThinkPad T23

MrPeter1985
Posts: 38
Joined: Fri Oct 08, 2010 1:30 pm
Location: Jeffersonville, Indiana
Contact:

Re: GRUB errors after installing Rescue & Recovery within XP

#7 Post by MrPeter1985 » Wed Oct 20, 2010 12:54 pm

Tim from OSGUI usually always has good Tutorials.

http://www.osgui.com/video/viewvideo/18 ... orial.html

I believe this video is what control was talking about.
Just a GURU from the LENOVO Forum ~ MrPeter1985 | T500_2055-2CU | upgraded to 4g of RAM and 7200rpm HDD

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “Linux Questions”

Who is online

Users browsing this forum: No registered users and 2 guests