I had an archived copy of PC Doctor ThinkVantage Toolbox (6.0.5849.23). It works with Windows 10 32-bit, but throws many errors for old Windows components (like Disk Defrag, Network Conifg, etc.), but eventually gives the whole System Information, including battery info that looks "real".
If I recall correctly, older versions of Power Manager software included info about the number of battery cycles, etc. that go beyond just FRU #, manufacturer, serial number, charge capacity, working capacity, and charge state.
Any suggestions of tools to find this out?
- Posts: 10137
- Joined: Sun Jun 04, 2006 1:26 am
- Location: San Jose, CA 95120 USA
X22 X24 X31 X41 X41T X60 X60s X61 X61s X200 X200s X300 X301 Z60m Z61t Z61p 560 560Z 600 600E 600X T21 T22 T23 T41 T60p T410 T420 T520 W500 W520 R50 A21p A22p A31 A31p
NOTE: All links to PC-Doctor software hosted by me are dead. Files removed 8/28/12 by manufacturer's demand.
The recommended standard tool in Linux is TLP: linrunner.de/en/tlp/tlp.html. It is included nowadays with the most relevant distributions.rkawakami wrote:[...] an alternate may be to use Linux. I understand that there's some programs which can read the battery status.
Typical sample output:
Code: Select all
[root]~ # tlp-stat -b --- TLP 0.8 -------------------------------------------- +++ ThinkPad Extended Battery Functions tp-smapi = active tpacpi-bat = inactive (kernel module 'acpi_call' not installed) +++ ThinkPad Battery Status: BAT0 (Main / Internal) /sys/devices/platform/smapi/BAT0/manufacturer = Panasonic /sys/devices/platform/smapi/BAT0/model = 92P1133 /sys/devices/platform/smapi/BAT0/manufacture_date = 2007-07-28 /sys/devices/platform/smapi/BAT0/first_use_date = 2008-01-12 /sys/devices/platform/smapi/BAT0/cycle_count = 305 /sys/devices/platform/smapi/BAT0/design_capacity = 84240 [mWh] /sys/devices/platform/smapi/BAT0/last_full_capacity = 67150 [mWh] /sys/devices/platform/smapi/BAT0/remaining_capacity = 43400 [mWh] /sys/devices/platform/smapi/BAT0/remaining_percent = 65 [%] /sys/devices/platform/smapi/BAT0/remaining_running_time_now = not_discharging [min] /sys/devices/platform/smapi/BAT0/remaining_charging_time = not_charging [min] /sys/devices/platform/smapi/BAT0/power_now = 0 [mW] /sys/devices/platform/smapi/BAT0/power_avg = 0 [mW] /sys/devices/platform/smapi/BAT0/state = idle /sys/devices/platform/smapi/BAT0/start_charge_thresh = 65 [%] /sys/devices/platform/smapi/BAT0/stop_charge_thresh = 95 [%] /sys/devices/platform/smapi/BAT0/force_discharge = 0 [root]~ #
Another option: Under Windows (XP and upwards, at least incl. 7; don't know about later versions) the freeware program "System Information for Windows" [SIW] will provide all the same information about the battery as Lenovo's Power Management tool does.
If you can find SIW ver. 2011 build 1029 (SIW 2011.10.29) go grab that; it's the free fullblown version as opposed to some of the more recent versions of SIW which are "professional" meaning that they willl do (probably!) essentially the same, but that you'll however have to pay for them!
Yet another (nice and free!) option is HWinfo - it will also provide you all information about "smart" batteries. A very useful tool indeed!
IBM T42 (2373-N1G): 1.8 GHz, 15" SXGA+ FlexView, 2 GB RAM, 64 MB Radeon 9600, 64 GB 1.8" SATA SSD, IBM a/b/g, BT, Win 7 Ultimate
- Similar Topics
- Last post
Who is online
Users browsing this forum: No registered users and 22 guests