nitrocaster wrote:carcuevas wrote:Also from today I am having some weird thing, after the computer is used for some more time abd get a bit warn, the screen gets black and I have to wait until is colder to make it work... It seems that I will need to open the laptop once more and see if the solder points were done correctly or whenever is hot something is happening...
Does it get warmer than the motherboard area just below it? Is there an image on the screen?
carcuevas wrote:Nitrocaster any if the IC on the board have some protection circuit for higher temperature? I think for some reason the board is getting hotter than it should and then it's stopping to work...
The microcontroller on board has Tj about 150 C and will stop working before reaching this temperature, but I doubt you are getting that high.
Uhmm well 150C for sure did not get
I could fried an egg there in that case
Actually always there is an image, but just sometimes there is no backlight... Well after doing some tests, it seems that problem may be the LVDS cable, but the thing I dont know is how can affect that much the temperature to the cable:
When hot:
https://youtu.be/wGkmzCYNyms
And if I put in the opposite cable the problem is in the other side, so I guess that the problem should be the cable
https://youtu.be/6lAY8eyMJcA
The weird thing is when cold, everything is working perfectly
that's really weird...
https://youtu.be/MMobhl5z_BM
Where I can get thos LVDS cables Nitrocaster? it seems to me that maybe since the cable got a bit fold because once I put it under the plastic frame where the keyboard and the cables are sited, so maybe it made more pressure than needed, but still it is really weird for me...
Thanks
Running Debian on x230 (i5-3320m-12GB-250GB Samsung 850EVO-FHD mod by Nitrocaster + LP125WF2SPB4)