I'm still having the backlight issue. Could you post what you did step by step? thanks!pysen wrote: ↑Tue Mar 20, 2018 11:44 amI'm using AwesomeWM and this xrandr command makes the DP-3 the primary monitor so that my system tray/applet icons are shown in my task bar and then I turn LVDS-1 off because I don't want it to be a 2nd screen outside of my physical monitor to the right side of it.evening_hunger wrote: ↑Tue Mar 20, 2018 10:04 amI don't yet have the mod, nor I have the full understanding of the mirroring issue, but I do understand xrandr.
Your xrandr output means Xorg can only see your LVDS-1, running FHD. Everything else is either off or disabled. Thus, you definitely need not use the command
as this sets Xorg to use exactly DP-3 and turn everything else off. And then (for reasons unclear to me) starts up LVDS-1 again. You would need the "--off" switchCode: Select all
xrandr --fb 1920x1080 --output DP-3 --primary --size 1920x1080 --left-of LVDS-1 --output LVDS-1 --off && xrandr --output LVDS-1 --auto
for DP-3 or whatever your screen is mirrored onto.
Gnome-panel-options or whatever its name is, is merely a wrapper for xrandr for people not familiar with CLI. In other words if this applet can turn of mirroring, xrandr
can do this and (much much) more. So you have two options. Either to find a proper command using xrandr in CLI; or -- less elegant -- start up gnome-panel-whatever in i3wm which
is just as possible. it's just a standalone program, if you know its name you can launch it (just do ' ls /usr/bin | grep -i panel ' to find the name I guess).
I added the "--fb 1920x1080" so that the screen area is limited to that size and when I then enable LVDS-1 back again with:
xrandr --output LVDS-1 --auto
This LVDS-1 output has no room to create a screen space outside my monitor on the right side and is added as a 'duplicate' behind my main monitor. If I don't enable the LVDS-1 again the backlight brightness is locked at a set value and thats why I enable it again at the end. Somewhat hacky way to make the backlight work and only have a single 1920x1080 screen but I'd rather not patch every single Arch kernel release
Take a look at our
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message
Upgrading X220/X230 to FHD 1080p
-
- Posts: 14
- Joined: Thu Mar 30, 2017 9:03 am
- Location: Rome, Italy
Re: Upgrading X220/X230 to FHD 1080p
Re: Upgrading X220/X230 to FHD 1080p
Script I run at startup:life_on_marx wrote: ↑Tue Mar 20, 2018 11:48 am
I'm still having the backlight issue. Could you post what you did step by step? thanks!
Code: Select all
cat /usr/local/bin/x230-monitor.sh
#!/bin/bash
xrandr --fb 1920x1080 --output DP-3 --primary --size 1920x1080 --left-of LVDS-1 --output LVDS-1 --off && xrandr --output LVDS-1 --auto
Code: Select all
ls -l /usr/local/bin/x230-monitor.sh
-rwxr-xr-x 1 root root 147 Mar 7 19:44 /usr/local/bin/x230-monitor.sh
Code: Select all
tee /sys/class/backlight/intel_backlight/brightness <<< 0
Code: Select all
tee /sys/class/backlight/intel_backlight/brightness <<< 4437
Code: Select all
ls -l /sys/class/backlight/intel_backlight/brightness
-rw-rw-r-- 1 root video 4096 Mar 20 17:57 /sys/class/backlight/intel_backlight/brightness
Code: Select all
cat /etc/udev/rules.d/82-backlight.rules
ACTION=="add", SUBSYSTEM=="backlight", KERNEL=="intel_backlight", RUN+="/bin/chgrp video /sys/class/backlight/%k/brightness"
ACTION=="add", SUBSYSTEM=="backlight", KERNEL=="intel_backlight", RUN+="/bin/chmod g+w /sys/class/backlight/%k/brightness"
Code: Select all
brightnessctl -d intel_backlight set +10%
brightnessctl -d intel_backlight set 10%-
I'm not sure what this duplicated monitor issue even is because I haven't had a problem with it so far.
Re: Upgrading X220/X230 to FHD 1080p
Thanks for the updates on Arch with i3wm hints.
Could someone provide the instructions for patching the kernel 4.15.x in Arch ? I could not find the instructions on this.
Is my assumption right that I need to change the display option Displayport2
Could someone provide the instructions for patching the kernel 4.15.x in Arch ? I could not find the instructions on this.
Is my assumption right that I need to change the display option Displayport2
If someone interested, i have x230 with mod for sale.
viewtopic.php?f=11&t=125870
viewtopic.php?f=11&t=125870
Re: Upgrading X220/X230 to FHD 1080p
Nitrocaster, please let us know if you are planning any more batches..
I did plug in the LVDS screen and it showed up perfectly so at this point I am thinking my system board has no problems and the FHD board is gone.. as previously I had sudden black screens more and more often, I can't think of anything else now. Remember, this is now a new system board as the other refused to POST (maybe I shorted that with the constant keyboard lift up? - what action miraculously gave back the screen after a hard reset..).
I was trying to find fuses on the FHD board itself and found two possible candidates -- they had a "103" on them? Maybe it's all wrong and they are not fuses at all. Nevertheless, I measured 755 or so for continuity and no beep. Getting a new board would be a decent thing to do.. I guess.
Fusion, thank you so much for the info. I tested F2/F6/F1 also F3/F4 (sb mentioned them related to screen) and all beep for continuity. (I don't know about VCC, absolute noob here).Fusion wrote: ↑Sat Mar 17, 2018 6:37 pmAUX is connected to VCC3B, but if this was not providing power, there'd probably be more things not working.
Check F6, which is located on the bottom (RAM slot) side of the board, right above the large docking connector.
Images https://imgur.com/a/hH4IJ
Don't try measuring voltages, as this can be tricky and could cause a short, just try measuring continuity on F6.
I did plug in the LVDS screen and it showed up perfectly so at this point I am thinking my system board has no problems and the FHD board is gone.. as previously I had sudden black screens more and more often, I can't think of anything else now. Remember, this is now a new system board as the other refused to POST (maybe I shorted that with the constant keyboard lift up? - what action miraculously gave back the screen after a hard reset..).
I was trying to find fuses on the FHD board itself and found two possible candidates -- they had a "103" on them? Maybe it's all wrong and they are not fuses at all. Nevertheless, I measured 755 or so for continuity and no beep. Getting a new board would be a decent thing to do.. I guess.
-
- Admin Emeritus
- Posts: 23825
- Joined: Mon Sep 18, 2006 5:17 am
- Location: Loch Garman, Éire
Re: Upgrading X220/X230 to FHD 1080p
On rev.4 there's a fuse with a P (= 3A), left of 2016 on https://i.imgur.com/sKfOkq2.jpg
AFAIK no fuse on rev.3 or earlier.
AFAIK no fuse on rev.3 or earlier.
Re: Upgrading X220/X230 to FHD 1080p
Seasonshu: Try touching the FHD board slightly with your finger when the computer is on. If you get any sign of lines/glitches/flicker than the soldering to the pins is insufficient.
Has anyone successfully got the display to work in High Sierra?
Has anyone successfully got the display to work in High Sierra?
ThinkPad X220, i7-2640m, 16GB RAM, 120GB Kingston SSD, Intel HD3000, 12.5" WQHD, MacOS Sierra 10.13.2
ThinkPad W500 4063-VA4 CD2 Penryn 2,80GHz, 4GB RAM, 320GB HDD, 15.4" WUXGA, FireGL V5700, Win7u
ThinkPad R60 9461-DXG P-CD2 1,83GHz, 2GB 667MHz, 100GB HDD, ATI X1400@512MB, XP2 Pro
ThinkPad W500 4063-VA4 CD2 Penryn 2,80GHz, 4GB RAM, 320GB HDD, 15.4" WUXGA, FireGL V5700, Win7u
ThinkPad R60 9461-DXG P-CD2 1,83GHz, 2GB 667MHz, 100GB HDD, ATI X1400@512MB, XP2 Pro
-
- Posts: 16
- Joined: Wed Sep 20, 2017 8:03 am
- Location: Albany, NY, USA
Re: Upgrading X220/X230 to FHD 1080p
Does anyone have any tricks to help solder the v5 sense wire? It keeps moving or coming loose when moving things into place.
Others have posted using different wires than the sense wire provided, what gauge are you using? I tried another wire, which was easier to solder but, it didn't work. I am assuming it is the sense wire (the screen is still black but VGA output still works)
Others have posted using different wires than the sense wire provided, what gauge are you using? I tried another wire, which was easier to solder but, it didn't work. I am assuming it is the sense wire (the screen is still black but VGA output still works)
Re: Upgrading X220/X230 to FHD 1080p
Hm, that's a valid question. As it was a re-install to a different main board (yes, it's a v3 one), the engineer used his own wire for the sense wire which _seems_ thicker to me. At the time I didn't ask, I trusted what he was doing is right.thrilleratplay wrote: ↑Tue Mar 27, 2018 9:00 pmOthers have posted using different wires than the sense wire provided, what gauge are you using? I tried another wire, which was easier to solder but, it didn't work. I am assuming it is the sense wire (the screen is still black but VGA output still works)
I don't think it's the soldering of the pins as I asked him to verify those twice.
-
- Junior Member
- Posts: 303
- Joined: Thu Nov 26, 2015 2:55 pm
- Location: Normandy, France
Re: Upgrading X220/X230 to FHD 1080p
I'm in a sixth month of wait for this mod, and lookin' at at least two more as I haven't even been contacted for final payment. (classy '9 months' are quite probable). So, seriously, nitrocaster should think it over and outsorce this business, get himself fully occupied with his drone things and just forget it.
T14amdR7-4750U/32GB/500gb.ssd/debian_testing (main driver)
X320/i7-2620M/8GB/256gb.ssd/FHD13.3''IPS/debian_testing (ex-main driver)
T30Pentium-M 4 1.8Ghz 512MB RAM - under restoration
X230/i5/8GB/500gb.hdd+256gb.m2ssd/IPS/debian_stable+win7
755CE, 486DX, approx 28MB RAM (Win95 JP)
X320/i7-2620M/8GB/256gb.ssd/FHD13.3''IPS/debian_testing (ex-main driver)
T30Pentium-M 4 1.8Ghz 512MB RAM - under restoration
X230/i5/8GB/500gb.hdd+256gb.m2ssd/IPS/debian_stable+win7
755CE, 486DX, approx 28MB RAM (Win95 JP)
-
- Posts: 16
- Joined: Wed Sep 20, 2017 8:03 am
- Location: Albany, NY, USA
Re: Upgrading X220/X230 to FHD 1080p
I may have just royally messed up the aux power points on the motherboard. Are there any other placed that aux power can be drawn from on the x230?
Re: Upgrading X220/X230 to FHD 1080p
I used the provided wire, and my first pass didn't stay in place like you describe. What I would recommend is to pre-tin the bottom joint of the cap with solder+flux, pre-tin the wire, and then apply flux to the cap. I had great success doing a 90 degree joint physically flush to the cap. I heated the wire first against conventional wisdom of 'bring higher thermal mass up component to temp first', moved it directly into position and then laid the tip (30 degree .2mm hakko tip 650F, leaded solder) flush against the wire and the cap at the same time for maybe a .5 second longer (still < 1 second) than would be instinctual. The joint turned out very nice, and I have been using this setup for a few months now and haven't had any issues and haven't babied the machine at all.thrilleratplay wrote: ↑Tue Mar 27, 2018 9:00 pmDoes anyone have any tricks to help solder the v5 sense wire? It keeps moving or coming loose when moving things into place.
Others have posted using different wires than the sense wire provided, what gauge are you using? I tried another wire, which was easier to solder but, it didn't work. I am assuming it is the sense wire (the screen is still black but VGA output still works)
ThinkPad X230, i7-3520m, 16GB RAM, 1Tb Crucial MX300, 1Tb Samsung 850 msata, Intel HD4000, 12.5" FHD
-
- Admin Emeritus
- Posts: 23825
- Joined: Mon Sep 18, 2006 5:17 am
- Location: Loch Garman, Éire
Re: Upgrading X220/X230 to FHD 1080p
If you haven't noticed/read before: the sensewire is a coated piece of wire that needs the coating scraped off before you can solder it.
Any other piece of (thin, uncoated) wire will also do.
Any other piece of (thin, uncoated) wire will also do.
-
- Senior Member
- Posts: 581
- Joined: Fri Mar 04, 2016 8:38 am
- Location: Yerevan, Armenia
- Contact:
Re: Upgrading X220/X230 to FHD 1080p
nitrocaster should stop leaving work late and dedicate weekends to Pepe kits - and he's already doing this. Will send more invoices and ship more kits this week.evening_hunger wrote: ↑Wed Mar 28, 2018 7:06 amI'm in a sixth month of wait for this mod, and lookin' at at least two more as I haven't even been contacted for final payment. (classy '9 months' are quite probable). So, seriously, nitrocaster should think it over and outsorce this business, get himself fully occupied with his drone things and just forget it.
By the way, I outsourced PCB assembly in 2nd and 3rd batches, but defect rates were so high that I'm still fixing about a half of the boards by hand. Interestingly, they said they did optical inspection. Maybe it's just my luck, but I plan to assemble the next batch in China.
-
- Senior Member
- Posts: 581
- Joined: Fri Mar 04, 2016 8:38 am
- Location: Yerevan, Armenia
- Contact:
Re: Upgrading X220/X230 to FHD 1080p
Wooooo! 32 orders shipped today. I sent more invoices today and will prepare more orders for shipping on the next week. We're almost finished processing pre-orders with deposits.
Re: Upgrading X220/X230 to FHD 1080p
How do I know I'm even on the list since there is no confirmation after submitting google-form? When waiting-time is months so far it's natural to get thoughts of order not been delivered?
Looking at the google-form there's Y's on green on very late numbers, this would indicate later orders have also been processed?
Looking at the google-form there's Y's on green on very late numbers, this would indicate later orders have also been processed?
-
- Senior Member
- Posts: 581
- Joined: Fri Mar 04, 2016 8:38 am
- Location: Yerevan, Armenia
- Contact:
Re: Upgrading X220/X230 to FHD 1080p
TeroS
If you submitted the form - you're on the list automatically.
I just got an idea. I can send email with order id in response to each pre-order form submission.
I don't understand what is unclear for you with order status page though.
If you submitted the form - you're on the list automatically.
I just got an idea. I can send email with order id in response to each pre-order form submission.
I don't understand what is unclear for you with order status page though.
-
- Senior Member
- Posts: 581
- Joined: Fri Mar 04, 2016 8:38 am
- Location: Yerevan, Armenia
- Contact:
Re: Upgrading X220/X230 to FHD 1080p
By the way, the major reason why orders are being processed so slow right now is because I'm out of tested adapter boards.
I have about 200 boards which have to be inspected, fixed if they're bad, cleaned, flashed, tested and packed. And that's mainly because assembly quality turned out to be such garbage that I spend many weekends soldering QFN chips, LVDS connectors and removing solder balls here and there.
I have about 200 boards which have to be inspected, fixed if they're bad, cleaned, flashed, tested and packed. And that's mainly because assembly quality turned out to be such garbage that I spend many weekends soldering QFN chips, LVDS connectors and removing solder balls here and there.
Re: Upgrading X220/X230 to FHD 1080p
The unclear part comes from the fact that after submitting form there is months of waiting before anything happens (3+ months now), as you noticed there isn't any confirmation of order either. So there is plenty of uncertainty left. And as it is now I don't know my order ID, so your idea of sending them is a good progress.nitrocaster wrote: ↑Sat Apr 07, 2018 12:29 pmTeroS
If you submitted the form - you're on the list automatically.
I just got an idea. I can send email with order id in response to each pre-order form submission.
I don't understand what is unclear for you with order status page though.
-
- Junior Member
- Posts: 303
- Joined: Thu Nov 26, 2015 2:55 pm
- Location: Normandy, France
Re: Upgrading X220/X230 to FHD 1080p
And it's all on you? Man, then I can sit back comfortably and wait until my B133HAN04.6 and bezel arrive from China, they're sure to make it on time:) And on a more serious tone, understood, too bad assembly went awry.nitrocaster wrote: ↑Sat Apr 07, 2018 12:37 pmI have about 200 boards which have to be inspected, fixed if they're bad, cleaned, flashed, tested and packed.
T14amdR7-4750U/32GB/500gb.ssd/debian_testing (main driver)
X320/i7-2620M/8GB/256gb.ssd/FHD13.3''IPS/debian_testing (ex-main driver)
T30Pentium-M 4 1.8Ghz 512MB RAM - under restoration
X230/i5/8GB/500gb.hdd+256gb.m2ssd/IPS/debian_stable+win7
755CE, 486DX, approx 28MB RAM (Win95 JP)
X320/i7-2620M/8GB/256gb.ssd/FHD13.3''IPS/debian_testing (ex-main driver)
T30Pentium-M 4 1.8Ghz 512MB RAM - under restoration
X230/i5/8GB/500gb.hdd+256gb.m2ssd/IPS/debian_stable+win7
755CE, 486DX, approx 28MB RAM (Win95 JP)
-
- Senior Member
- Posts: 581
- Joined: Fri Mar 04, 2016 8:38 am
- Location: Yerevan, Armenia
- Contact:
Re: Upgrading X220/X230 to FHD 1080p
I sent emails with order id to everybody on the 3rd batch list. Kinda sad to see that some mailboxes don't exist anymore Which probably means that I have to find a way to deliver kits faster.
Next bulk shipment (about 35 orders) is planned on this week.
Next bulk shipment (about 35 orders) is planned on this week.
-
- Posts: 1
- Joined: Wed Apr 11, 2018 11:18 am
- Location: PARIS, FRANCE
Re: Upgrading X220/X230 to FHD 1080p
Hey Nitro, I just registered to order one of your Pepe kit, it's quite a brilliant job IMO! I sent you the pre-order form earlier today, just wondering if there's any chance that I'm on time for your 3rd batch? I mean, if there are any spares from canceled orders or so... Thank you anyway!
Re: Upgrading X220/X230 to FHD 1080p
@nictrocaster: Could you post the part number of the FPC cable connector?
I broke off the black latch so I want to order one and see if I can replace the latch.
I broke off the black latch so I want to order one and see if I can replace the latch.
ThinkPad X220, i7-2640m, 16GB RAM, 120GB Kingston SSD, Intel HD3000, 12.5" WQHD, MacOS Sierra 10.13.2
ThinkPad W500 4063-VA4 CD2 Penryn 2,80GHz, 4GB RAM, 320GB HDD, 15.4" WUXGA, FireGL V5700, Win7u
ThinkPad R60 9461-DXG P-CD2 1,83GHz, 2GB 667MHz, 100GB HDD, ATI X1400@512MB, XP2 Pro
ThinkPad W500 4063-VA4 CD2 Penryn 2,80GHz, 4GB RAM, 320GB HDD, 15.4" WUXGA, FireGL V5700, Win7u
ThinkPad R60 9461-DXG P-CD2 1,83GHz, 2GB 667MHz, 100GB HDD, ATI X1400@512MB, XP2 Pro
Re: Upgrading X220/X230 to FHD 1080p
Now I have a more serious problem possibly related to breaking off the latch.
When the FPC cable is inserted, the fuse gets very hot. There's a short from AUX to GND (4.5Ohm) for no apparent reason.
When the FPC cable is inserted, the fuse gets very hot. There's a short from AUX to GND (4.5Ohm) for no apparent reason.
ThinkPad X220, i7-2640m, 16GB RAM, 120GB Kingston SSD, Intel HD3000, 12.5" WQHD, MacOS Sierra 10.13.2
ThinkPad W500 4063-VA4 CD2 Penryn 2,80GHz, 4GB RAM, 320GB HDD, 15.4" WUXGA, FireGL V5700, Win7u
ThinkPad R60 9461-DXG P-CD2 1,83GHz, 2GB 667MHz, 100GB HDD, ATI X1400@512MB, XP2 Pro
ThinkPad W500 4063-VA4 CD2 Penryn 2,80GHz, 4GB RAM, 320GB HDD, 15.4" WUXGA, FireGL V5700, Win7u
ThinkPad R60 9461-DXG P-CD2 1,83GHz, 2GB 667MHz, 100GB HDD, ATI X1400@512MB, XP2 Pro
-
- Sophomore Member
- Posts: 183
- Joined: Fri Nov 27, 2015 7:18 pm
- Location: Quebec, Canada
Re: Upgrading X220/X230 to FHD 1080p
Are you saying you're holding it without the latch ? I wouldn't do that. It seems quality for that connector went down from rev 3 to 4. I had 2 pins sticking out of the gate, no way to put them back. I bent it outwards until the center snapped. You might be able to take it out in 1 piece but it's absurdly fragile and way harder to put back in 1 piece. Then I got it back together by inserting both parts at the same time, starting with the pivot pins on both sides, joining the center last. There is now tape on this one reminding me not to mess with it anymore.
Re: Upgrading X220/X230 to FHD 1080p
If I understood correctly, with the FHD mod and Mini Dock Series 3, the DP and the DVI on the dock will be both non functional, right?
Re: Upgrading X220/X230 to FHD 1080p
Yep, same happened to me, snapped in the middle, even though I was being very careful.boutch55555 wrote: ↑Sun Apr 15, 2018 5:10 pmAre you saying you're holding it without the latch ? I wouldn't do that. It seems quality for that connector went down from rev 3 to 4. I had 2 pins sticking out of the gate, no way to put them back. I bent it outwards until the center snapped. You might be able to take it out in 1 piece but it's absurdly fragile and way harder to put back in 1 piece. Then I got it back together by inserting both parts at the same time, starting with the pivot pins on both sides, joining the center last. There is now tape on this one reminding me not to mess with it anymore.
I added a piece of capton tape to the FPC cable to hold it in place, but then I noticed flickering in Ubuntu and sometimes the screen would turn off in Windows. So I took the keyboard out to check the connection and since then the screen does not turn on and the fuse gets very got (due to the short). Problem is I can't tell what's shorting, seems to be something on the FHD board itself, because when the FPC isn't inserted, there is no short to ground measurable. Pins in the connector aren't bent, checked under a microscope.
ThinkPad X220, i7-2640m, 16GB RAM, 120GB Kingston SSD, Intel HD3000, 12.5" WQHD, MacOS Sierra 10.13.2
ThinkPad W500 4063-VA4 CD2 Penryn 2,80GHz, 4GB RAM, 320GB HDD, 15.4" WUXGA, FireGL V5700, Win7u
ThinkPad R60 9461-DXG P-CD2 1,83GHz, 2GB 667MHz, 100GB HDD, ATI X1400@512MB, XP2 Pro
ThinkPad W500 4063-VA4 CD2 Penryn 2,80GHz, 4GB RAM, 320GB HDD, 15.4" WUXGA, FireGL V5700, Win7u
ThinkPad R60 9461-DXG P-CD2 1,83GHz, 2GB 667MHz, 100GB HDD, ATI X1400@512MB, XP2 Pro
-
- Junior Member
- Posts: 303
- Joined: Thu Nov 26, 2015 2:55 pm
- Location: Normandy, France
Re: Upgrading X220/X230 to FHD 1080p
I remember asking the question is this very topic. I think DVI will work.
T14amdR7-4750U/32GB/500gb.ssd/debian_testing (main driver)
X320/i7-2620M/8GB/256gb.ssd/FHD13.3''IPS/debian_testing (ex-main driver)
T30Pentium-M 4 1.8Ghz 512MB RAM - under restoration
X230/i5/8GB/500gb.hdd+256gb.m2ssd/IPS/debian_stable+win7
755CE, 486DX, approx 28MB RAM (Win95 JP)
X320/i7-2620M/8GB/256gb.ssd/FHD13.3''IPS/debian_testing (ex-main driver)
T30Pentium-M 4 1.8Ghz 512MB RAM - under restoration
X230/i5/8GB/500gb.hdd+256gb.m2ssd/IPS/debian_stable+win7
755CE, 486DX, approx 28MB RAM (Win95 JP)
Re: Upgrading X220/X230 to FHD 1080p
Edit: found my earlier answer to this question. I hope it's correct:evening_hunger wrote: ↑Tue Apr 17, 2018 5:16 amI remember asking the question is this very topic. I think DVI will work.
https://forum.thinkpads.com/viewtopic.p ... 94#p811294
Thinkpad 25 (20K7), T490 (20N3), Yoga 14 (20FY), T430s (IPS FHD + Classic Keyboard), X220 4291-4BG
X61 7673-V2V, T60 2007-QPG, T42 2373-F7G, X32 (IPS Screen), A31p w/ Ultrabay Numpad
X61 7673-V2V, T60 2007-QPG, T42 2373-F7G, X32 (IPS Screen), A31p w/ Ultrabay Numpad
-
- Senior Member
- Posts: 514
- Joined: Fri Apr 13, 2018 11:41 am
- Location: Chicago, IL
Re: Upgrading X220/X230 to FHD 1080p
I figured out how to disassemble the x220t display assembly, if you can make a board that works in the x220t then I would buy it, we also need a compatable screen which could come from the yoga series
theforgottenki.ng
P1 Gen 5: i9-12900H - RTX A5500 - 64GB DDR5 - 2TB NVMe
W701ds: i7-940XM - 32GB DDR3 - 256GB SSD + 1TB HDD - FX 2800M - 17" 1920x1200 + 10" 768x1280 - Wacom - Dock
PC XT: 5160 + 5151 + 5153 + F XT - Intel 8088 - 640 KB - 2GB CF
P1 Gen 5: i9-12900H - RTX A5500 - 64GB DDR5 - 2TB NVMe
W701ds: i7-940XM - 32GB DDR3 - 256GB SSD + 1TB HDD - FX 2800M - 17" 1920x1200 + 10" 768x1280 - Wacom - Dock
PC XT: 5160 + 5151 + 5153 + F XT - Intel 8088 - 640 KB - 2GB CF
-
- Similar Topics
- Replies
- Views
- Last post
-
- 0 Replies
- 990 Views
-
Last post by danceswithrage
Tue Jan 30, 2024 5:26 pm
-
- 1 Replies
- 562 Views
-
Last post by TPFanatic
Wed Feb 28, 2024 7:06 pm
-
-
Mike mute LED button / Hotkeys integration of X220/X230 not working with Windows 11
by kokkolis » Wed Feb 28, 2024 12:03 pm » in ThinkPad X200/X201/X220 and X300/X301 Series - 2 Replies
- 514 Views
-
Last post by kokkolis
Wed Feb 28, 2024 3:04 pm
-
-
-
T430 (no 's') FHD Kit recommendation
by TrackpointManiac » Tue Dec 19, 2023 1:01 pm » in ThinkPad T430-T490 / T530-T590 Series - 0 Replies
- 2146 Views
-
Last post by TrackpointManiac
Tue Dec 19, 2023 1:01 pm
-
Who is online
Users browsing this forum: Bing [Bot] and 21 guests