First of all, I have a known working GXT 4500p installed but there is no output to the display whatsoever, even if I go into SMS and try to change the console.
Secondly, it doesn't recognize the hard drive I have installed. I have one of those 50/68pin scsi -> sca80 adapters off of eBay and have tried multiple jumper settings to try to get it to work. There shouldn't be any SCSI ID conflict or anything. The drive and adapter are both known working and I've used them in an RS/6000 before.
Thanks for any help/ideas.
- Sophomore Member
- Posts: 195
- Joined: Fri Jan 02, 2015 10:38 am
- Location: Henderson, NV USA
Are you able to connect via serial/management port? A serial cable, a putty session configured for a USB/serial adapter is what I use now days with my modern notebook.
As far as the SCSI drive, you need to connect to firmware and run diagnostics first. First the backplane, then the controller, then devices.
IBM ThinkPad 700, 720C, 750Cs, 360C, 360P, 360CE, 360PE, 730TE, PC110, 365CSD, 365ED, 701Cs, 820, 600X, 770X, 240, T30
IBM RS/6000 43P 150
Lenovo ThinkPad X41T, X61T, X200T, X201T, X220T, X230T, X280
Lenovo ThinkCenter M92p Tiny, M900 Tiny
Who is online
Users browsing this forum: No registered users and 2 guests