Take a look at our
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message
W530 Minidisplay port to HDMI TV?
-
- Senior Member
- Posts: 715
- Joined: Sat Jan 05, 2008 1:52 pm
- Location: NY, NY
W530 Minidisplay port to HDMI TV?
[Mods, if there's a better W530 section, I couldn't find it. Please feel free to move as appropriate.]
Today I just tried to connect my W530 with Nvidia graphics via a cable, theoretically a 4k capable minidisplayport to HDMI cable, to a 24" Toshiba TV with HDMI inputs.
The phrases "No joy" and "Something simple, stupid" comes to mind.
The best I could get, muddling around with the settings in Win10, was for the Intel graphics adapter to rear its head and admit that "monitor#2" now existed. But the best I could see was a BLANK desktop, except for a fully populated task bar. Somewhere...either this is a problem of the Nvidia card not supporting the displayport? Or a resolution issue? Which seems odd, since that task bar was there in all of its glory. Just no desktop, and no apps.
HELP?!
I really can't use the built-in display anymore, I was hoping that the mdp would let me use the HDMI input on a larger conventional monitor, or an existing TV. And I fully confess, I haven't messed with external monitor adapters in a decade.
And then, icing on the cake...when I was done, the TV "forgot" the signal from the cable box, pretending it was blown out until the box was reinitialized and re-acquired. Ah, technology, marvelous. Did I mention...HELP?! Please?
Today I just tried to connect my W530 with Nvidia graphics via a cable, theoretically a 4k capable minidisplayport to HDMI cable, to a 24" Toshiba TV with HDMI inputs.
The phrases "No joy" and "Something simple, stupid" comes to mind.
The best I could get, muddling around with the settings in Win10, was for the Intel graphics adapter to rear its head and admit that "monitor#2" now existed. But the best I could see was a BLANK desktop, except for a fully populated task bar. Somewhere...either this is a problem of the Nvidia card not supporting the displayport? Or a resolution issue? Which seems odd, since that task bar was there in all of its glory. Just no desktop, and no apps.
HELP?!
I really can't use the built-in display anymore, I was hoping that the mdp would let me use the HDMI input on a larger conventional monitor, or an existing TV. And I fully confess, I haven't messed with external monitor adapters in a decade.
And then, icing on the cake...when I was done, the TV "forgot" the signal from the cable box, pretending it was blown out until the box was reinitialized and re-acquired. Ah, technology, marvelous. Did I mention...HELP?! Please?
"The only good silicon life form, is a dead silicon life form." [Will Rogers]
-- Harboring a retired T61P with Vista/U/32 and housebreaking a younger W530 foolishly upgraded from Win7/64 to Win10.
-- Harboring a retired T61P with Vista/U/32 and housebreaking a younger W530 foolishly upgraded from Win7/64 to Win10.
Re: W530 Minidisplay port to HDMI TV?
Try setting the output resolution to either 480p, 720p or 1080p. Ensure the refresh rate is 60Hz.
Sounds like your TV is not happy with the signal being received.
Can you try with another TV?
You should be able to get video working at least. Whether or not audio will work is another question.
Sounds like your TV is not happy with the signal being received.
Can you try with another TV?
You should be able to get video working at least. Whether or not audio will work is another question.
Re: W530 Minidisplay port to HDMI TV?
Sounds like there is no issue. Empty desktop, no apps just means that it was set to extended desktop, and the primary desktop was still sent to monitor #1.hellosailor wrote: ↑Wed Mar 13, 2019 4:22 pmThe best I could get, muddling around with the settings in Win10, was for the Intel graphics adapter to rear its head and admit that "monitor#2" now existed. But the best I could see was a BLANK desktop, except for a fully populated task bar. Somewhere...either this is a problem of the Nvidia card not supporting the displayport? Or a resolution issue? Which seems odd, since that task bar was there in all of its glory. Just no desktop, and no apps.
Hit Win+P and try to choose 'Duplicate' or 'Second Screen Only'.
Thinkpad 25 (20K7), T490 (20N3), Yoga 14 (20FY), T430s (IPS FHD + Classic Keyboard), X220 4291-4BG
X61 7673-V2V, T60 2007-QPG, T42 2373-F7G, X32 (IPS Screen), A31p w/ Ultrabay Numpad
X61 7673-V2V, T60 2007-QPG, T42 2373-F7G, X32 (IPS Screen), A31p w/ Ultrabay Numpad
-
- Senior Member
- Posts: 715
- Joined: Sat Jan 05, 2008 1:52 pm
- Location: NY, NY
Re: W530 Minidisplay port to HDMI TV?
Thanks guys, I think dr nailed it!
Oh DUH, who ever heard of Win+P ?? A shortcut to settings that apparently just aren't in someplace logical, like the display settings or the control panel? (Sigh)
Sure enough Win+P shows I'm set to "primary only" and that probably is all it needs.
On trying another TV or resolutions: Resolution was fine, after all, the task bar was there in its full glory.
I didn't want to start pulling apart the "installed" TVs that are hard to get behind, which left just this one as a likely test bed. I'm trying to see if using a 24" monitor will let me work with the computer without needing as much of the low-vision accessibility kludges, especially in browsers. Next step up is to try a 32" although I'm darn if I know where I'd be able to use it...maybe Samsung will release an accordion folding model.(G)
What web designers, even ones employed by multinational corporations, don't seem to realize, is that if a visitor is using enlarged viewing settings, that literally blows away the right and bottom part of the browser screen. Little things like a "SUBMIT" button simply don't appear--and unless you're looking carefully for the disappearing scroll bars (in the new browsers) there's also no reason to even suspect something has just been pushed out of sight.
Then there's the folks who use oh-so-stylish grey type on grey backgrounds, or typography like WIRED, designed for young hipsters and, ironically, making their Kindle version illegible to many others.
dr-
If I leave the display set up for duplicate (laptop+external) is there any harm in that? Am I using more power, generating more heat, burdening the CPU, any reason to enable the extra video when I'm not using it?
Oh DUH, who ever heard of Win+P ?? A shortcut to settings that apparently just aren't in someplace logical, like the display settings or the control panel? (Sigh)
Sure enough Win+P shows I'm set to "primary only" and that probably is all it needs.
On trying another TV or resolutions: Resolution was fine, after all, the task bar was there in its full glory.
I didn't want to start pulling apart the "installed" TVs that are hard to get behind, which left just this one as a likely test bed. I'm trying to see if using a 24" monitor will let me work with the computer without needing as much of the low-vision accessibility kludges, especially in browsers. Next step up is to try a 32" although I'm darn if I know where I'd be able to use it...maybe Samsung will release an accordion folding model.(G)
What web designers, even ones employed by multinational corporations, don't seem to realize, is that if a visitor is using enlarged viewing settings, that literally blows away the right and bottom part of the browser screen. Little things like a "SUBMIT" button simply don't appear--and unless you're looking carefully for the disappearing scroll bars (in the new browsers) there's also no reason to even suspect something has just been pushed out of sight.
Then there's the folks who use oh-so-stylish grey type on grey backgrounds, or typography like WIRED, designed for young hipsters and, ironically, making their Kindle version illegible to many others.
dr-
If I leave the display set up for duplicate (laptop+external) is there any harm in that? Am I using more power, generating more heat, burdening the CPU, any reason to enable the extra video when I'm not using it?
"The only good silicon life form, is a dead silicon life form." [Will Rogers]
-- Harboring a retired T61P with Vista/U/32 and housebreaking a younger W530 foolishly upgraded from Win7/64 to Win10.
-- Harboring a retired T61P with Vista/U/32 and housebreaking a younger W530 foolishly upgraded from Win7/64 to Win10.
-
- Senior ThinkPadder
- Posts: 2670
- Joined: Sun Aug 09, 2015 9:25 am
- Location: N. Bellmore, ny
Re: W530 Minidisplay port to HDMI TV?
If it makes your life any easier Fn+F7 should also do the same as Win+P.
Thinkpad4by3's Law of the Universe.
The efficiency of two screens equally sized with equal numbers if pixels are equal. The time spent by a 4:3 user complaining about 16:9 is proportional to the inefficiency working with a 16:9 display, therefore the amount of useful work extracted is equal.
The efficiency of two screens equally sized with equal numbers if pixels are equal. The time spent by a 4:3 user complaining about 16:9 is proportional to the inefficiency working with a 16:9 display, therefore the amount of useful work extracted is equal.
-
- Senior Member
- Posts: 715
- Joined: Sat Jan 05, 2008 1:52 pm
- Location: NY, NY
Re: W530 Minidisplay port to HDMI TV?
Thanks, but F7 and FN+F7 both do nothing here in Win10.
A quirk about Win+P: the laptop screen drops to a smaller image area, black shadowboxed on both sides, when I have it set for "Duplicate", even though the laptop has nothing connected to it.
Is there a setting someplace that is telling it what a theoretical second monitor has been set to, controlling the resolution?
A quirk about Win+P: the laptop screen drops to a smaller image area, black shadowboxed on both sides, when I have it set for "Duplicate", even though the laptop has nothing connected to it.
Is there a setting someplace that is telling it what a theoretical second monitor has been set to, controlling the resolution?
"The only good silicon life form, is a dead silicon life form." [Will Rogers]
-- Harboring a retired T61P with Vista/U/32 and housebreaking a younger W530 foolishly upgraded from Win7/64 to Win10.
-- Harboring a retired T61P with Vista/U/32 and housebreaking a younger W530 foolishly upgraded from Win7/64 to Win10.
Re: W530 Minidisplay port to HDMI TV?
The shortcut has been around since Windows 7 was introduced (like 10 years ago?), and in any case, all the options can be configured through the Display Settings anyways, it just takes a few more clicks to set it up, and is (apparently) easy to miss/misunderstand?hellosailor wrote: ↑Thu Mar 14, 2019 1:16 pmOh DUH, who ever heard of Win+P ?? A shortcut to settings that apparently just aren't in someplace logical, like the display settings or the control panel? (Sigh)
Thinkpad 25 (20K7), T490 (20N3), Yoga 14 (20FY), T430s (IPS FHD + Classic Keyboard), X220 4291-4BG
X61 7673-V2V, T60 2007-QPG, T42 2373-F7G, X32 (IPS Screen), A31p w/ Ultrabay Numpad
X61 7673-V2V, T60 2007-QPG, T42 2373-F7G, X32 (IPS Screen), A31p w/ Ultrabay Numpad
-
- Senior Member
- Posts: 715
- Joined: Sat Jan 05, 2008 1:52 pm
- Location: NY, NY
Re: W530 Minidisplay port to HDMI TV?
When Microsoft Word for Windows version 6.0, and Microsoft Word version 6.0, were both released around 1986, I had 1200 pages of fine documentation to read, and I got a chance to find every feature in each program. Which was the norm back then.
In fact, Windows used to come with documentation.
Now that everyone has just decided to emulate Zork (poke around, see what's under every rock) I'm sure I've missed a lot of things. I never had the need to explore that feature before. Unlike most equities traders, I don't need three screens on my desk, ergh, lap.
And "Display settings" here (which is a machine stuck at Win10 v.1511 for reasons no one at MS can explain) only shows options for the built-in display, at least, when nothing external is connected. It does NOT offer the same four choices that Win+P offers under the exact same conditions.
There appear to be many glitches between versions of Win10, and many more caused by Lenono's lack of Win10 drivers, or failure of Win10 drivers. It will be pushing me into a newer machine, at which point I'll reluctantly be looking at splitting into "the legacy machine" versus "the new machine and new monitor" (probably) that will require some dedicated real estate.
But between Lenono's failure to really release Win10 support (for instance, screen brightness, caps-lock, other on-screen indicators no longer appear) and Win10's curious issues (five MS reps told me the secret path to install the (different) upgrades that would solve my problems, and in each case, the upgrade blew away the boot files and left me with no computer, fortunately I keep a backup)...I'm going to be riding two chariots, Ben-Hur style, for a ways to come.
I especially love it when Gargoyle claims that Outlook is a security risk...or the bank or someplace else I might want to reach online says my browser is too old to support--despite it being a current and widely supported browser. And Gargoyle Contacts SO professionally tells me I have only 64 contacts for almost 30 seconds before it finds the remaining thousands, oops. And then, reloads and refreshes the entire screen after each LETTER is typed on a contact update.
All this stuff...It just ain't explained.
Thanks for the assist!
In fact, Windows used to come with documentation.
Now that everyone has just decided to emulate Zork (poke around, see what's under every rock) I'm sure I've missed a lot of things. I never had the need to explore that feature before. Unlike most equities traders, I don't need three screens on my desk, ergh, lap.
And "Display settings" here (which is a machine stuck at Win10 v.1511 for reasons no one at MS can explain) only shows options for the built-in display, at least, when nothing external is connected. It does NOT offer the same four choices that Win+P offers under the exact same conditions.
There appear to be many glitches between versions of Win10, and many more caused by Lenono's lack of Win10 drivers, or failure of Win10 drivers. It will be pushing me into a newer machine, at which point I'll reluctantly be looking at splitting into "the legacy machine" versus "the new machine and new monitor" (probably) that will require some dedicated real estate.
But between Lenono's failure to really release Win10 support (for instance, screen brightness, caps-lock, other on-screen indicators no longer appear) and Win10's curious issues (five MS reps told me the secret path to install the (different) upgrades that would solve my problems, and in each case, the upgrade blew away the boot files and left me with no computer, fortunately I keep a backup)...I'm going to be riding two chariots, Ben-Hur style, for a ways to come.
I especially love it when Gargoyle claims that Outlook is a security risk...or the bank or someplace else I might want to reach online says my browser is too old to support--despite it being a current and widely supported browser. And Gargoyle Contacts SO professionally tells me I have only 64 contacts for almost 30 seconds before it finds the remaining thousands, oops. And then, reloads and refreshes the entire screen after each LETTER is typed on a contact update.
All this stuff...It just ain't explained.
Thanks for the assist!
"The only good silicon life form, is a dead silicon life form." [Will Rogers]
-- Harboring a retired T61P with Vista/U/32 and housebreaking a younger W530 foolishly upgraded from Win7/64 to Win10.
-- Harboring a retired T61P with Vista/U/32 and housebreaking a younger W530 foolishly upgraded from Win7/64 to Win10.
-
- Similar Topics
- Replies
- Views
- Last post
-
-
T440p + Ultra Dock, but dock video out (HDMI) not working
by Arf the Lab » Sat Nov 04, 2023 6:58 pm » in ThinkPad T430-T490 / T530-T590 Series - 6 Replies
- 5109 Views
-
Last post by RealBlackStuff
Mon Nov 06, 2023 1:39 am
-
-
-
I look for an 2nd Opionion if I found the Manufacture of the HDMI Matrix Switch
by Boy2006 » Sat Feb 24, 2024 7:02 am » in Off-Topic Stuff - 0 Replies
- 295 Views
-
Last post by Boy2006
Sat Feb 24, 2024 7:02 am
-
-
-
HDMI to USB cable recommendations - please
by ap63 » Wed Mar 13, 2024 5:24 pm » in ThinkPad T60/T61 Series - 5 Replies
- 514 Views
-
Last post by ap63
Sat Mar 16, 2024 5:40 pm
-
-
-
FS: ThinkPad W530
by PiZzA EnGiNeEr » Sat Nov 18, 2023 11:48 pm » in Marketplace - Forum Members only - 2 Replies
- 1537 Views
-
Last post by Brad
Thu Nov 23, 2023 9:04 am
-
Who is online
Users browsing this forum: No registered users and 5 guests