Take a look at our
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message
Upgrading X220/X230 to FHD 1080p
Re: Upgrading X220/X230 to FHD 1080p
ahh I see the problem. It wants to get those submodules from my repo.. let me investigate.
X220 i7, nitrocaster FullHD mod, coreboot with LVDS patch
Re: Upgrading X220/X230 to FHD 1080p
I replayed the whole process on a fresh raspi installation and updated https://daduke.org/hardware/x220-fhd/ accordingly.dwhacks wrote: ↑Sun May 05, 2019 12:54 amWell I've got coreboot back on my x220 (I flashed my prior build as it was easy to start). Now I'm trying to build yours with the mod, I'm not good with git! ha.daduke wrote: ↑Fri May 03, 2019 1:07 pm
probably, it's worth a try.
just revert 840a47e if you're not using VCC3P. I've reported my progress on https://review.coreboot.org/c/coreboot/+/28950/ but no reaction yet (that's where the most of the changes come from, I just packaged up things nicely...
So, how do we makesure we have yours? git clone <link to your branch> then git checkout x220_fhd? and then revert to the regular power way by git checkout 840a47e ?
This is what I've done anyway, and I get an error at "make"Code: Select all
dwhacks@X220 ~/daduke/coreboot $ make Cloning into '3rdparty/arm-trusted-firmware'... Username for 'https://github.com': dwhacks Password for 'https://dwhacks@github.com': remote: Repository not found. fatal: repository 'https://github.com/daduke/arm-trusted-firmware.git/' not found fatal: clone of 'https://github.com/daduke/arm-trusted-firmware.git' into submodule path '3rdparty/arm-trusted-firmware' failed GEN generated/bootblock.ld CP bootblock/arch/x86/bootblock.ld LINK cbfs/fallback/bootblock.debug OBJCOPY cbfs/fallback/bootblock.elf OBJCOPY bootblock.raw.elf OBJCOPY bootblock.raw.bin CP romstage/arch/x86/memlayout.ld In file included from src/arch/x86/memlayout.ld:16: src/include/memlayout.h:22:10: fatal error: vb2_constants.h: No such file or directory #include <vb2_constants.h> ^~~~~~~~~~~~~~~~~ compilation terminated. Makefile:355: recipe for target 'build/romstage/arch/x86/memlayout.ld' failed make: *** [build/romstage/arch/x86/memlayout.ld] Error 1 dwhacks@X220 ~/daduke/coreboot $
X220 i7, nitrocaster FullHD mod, coreboot with LVDS patch
Re: Upgrading X220/X230 to FHD 1080p
I'm guessing that's where my problem is:daduke wrote: ↑Sun May 05, 2019 2:51 am
did you doas all the tutorials tell you to? My repo is a fork of plain coreboot, so you'll have to follow the exact same steps.Code: Select all
git submodule update --init --recursive
Code: Select all
dwhacks@X220 ~/daduke2/coreboot $ git submodule update --init --recursive
Cloning into '3rdparty/arm-trusted-firmware'...
Username for 'https://github.com': dwhacks
Password for 'https://dwhacks@github.com':
remote: Repository not found.
fatal: repository 'https://github.com/daduke/arm-trusted-firmware.git/' not found
fatal: clone of 'https://github.com/daduke/arm-trusted-firmware.git' into submodule path '3rdparty/arm-trusted-firmware' failed
EDIT: nevermind, I missed some of your posts! I'll try it now!
Re: Upgrading X220/X230 to FHD 1080p
Well I've got your fork working! only one display and boots into linux mint great! Now just to test Windows!
Re: Upgrading X220/X230 to FHD 1080p
hooray! congrats.
X220 i7, nitrocaster FullHD mod, coreboot with LVDS patch
Re: Upgrading X220/X230 to FHD 1080p
I've got the mod installed in my x230 (Ubuntu 19.04) and the display looks amazing!
Couple issues I'm seeing and I'm wondering if anyone else has seen the same thing.
First, the display flickers every 10-15 seconds, and it looks like there's falling snow. It's really bad at the grub boot screen (it flickers non-stop), but once logged in, it settles down to every 10-15 seconds.
Second, the Ubuntu login screen isn't present on the monitor. I've used the display control panel to set the displays to mirrored, but I can't see the account selection screen.
Third, it doesn't suspend/resume with the lid anymore. I have HandleLidSwitchDocked=suspend in my /etc/systemd/logind.conf, but I still see this in my syslog when I suspend:
And this when I resume:
Any suggestions?
Couple issues I'm seeing and I'm wondering if anyone else has seen the same thing.
First, the display flickers every 10-15 seconds, and it looks like there's falling snow. It's really bad at the grub boot screen (it flickers non-stop), but once logged in, it settles down to every 10-15 seconds.
Second, the Ubuntu login screen isn't present on the monitor. I've used the display control panel to set the displays to mirrored, but I can't see the account selection screen.
Third, it doesn't suspend/resume with the lid anymore. I have HandleLidSwitchDocked=suspend in my /etc/systemd/logind.conf, but I still see this in my syslog when I suspend:
Code: Select all
May 5 13:11:32 sazerac kernel: [ 647.695967] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
May 5 13:11:32 sazerac kernel: [ 647.695973] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
May 5 13:11:32 sazerac kernel: [ 647.696427] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
May 5 13:11:32 sazerac kernel: [ 647.696431] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
May 5 13:11:33 sazerac /usr/lib/gdm3/gdm-x-session[1439]: (WW) EDID timing clock 141.00 exceeds claimed max 15MHz, fixing
May 5 13:11:33 sazerac /usr/lib/gdm3/gdm-x-session[1439]: (II) modeset(0): EDID vendor "LGD", prod id 1186
May 5 13:11:33 sazerac /usr/lib/gdm3/gdm-x-session[1439]: (II) modeset(0): Printing DDC gathered Modelines:
May 5 13:11:33 sazerac /usr/lib/gdm3/gdm-x-session[1439]: (II) modeset(0): Modeline "1920x1080"x0.0 138.70 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.7 kHz eP)
May 5 13:11:33 sazerac /usr/lib/gdm3/gdm-x-session[1439]: (II) modeset(0): Modeline "1920x1080"x0.0 111.00 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (53.4 kHz e)
May 5 13:11:33 sazerac org.gnome.Shell.desktop[1580]: Window manager warning: Overwriting existing binding of keysym 38 with keysym 38 (keycode 11).
May 5 13:11:33 sazerac org.gnome.Shell.desktop[1580]: Window manager warning: Overwriting existing binding of keysym 39 with keysym 39 (keycode 12).
May 5 13:11:33 sazerac org.gnome.Shell.desktop[1580]: Window manager warning: Overwriting existing binding of keysym 31 with keysym 31 (keycode a).
May 5 13:11:33 sazerac org.gnome.Shell.desktop[1580]: Window manager warning: Overwriting existing binding of keysym 32 with keysym 32 (keycode b).
May 5 13:11:33 sazerac org.gnome.Shell.desktop[1580]: Window manager warning: Overwriting existing binding of keysym 33 with keysym 33 (keycode c).
May 5 13:11:33 sazerac org.gnome.Shell.desktop[1580]: Window manager warning: Overwriting existing binding of keysym 34 with keysym 34 (keycode d).
May 5 13:11:33 sazerac org.gnome.Shell.desktop[1580]: Window manager warning: Overwriting existing binding of keysym 35 with keysym 35 (keycode e).
May 5 13:11:33 sazerac org.gnome.Shell.desktop[1580]: Window manager warning: Overwriting existing binding of keysym 36 with keysym 36 (keycode f).
May 5 13:11:33 sazerac org.gnome.Shell.desktop[1580]: Window manager warning: Overwriting existing binding of keysym 37 with keysym 37 (keycode 10).
Code: Select all
May 5 13:11:40 sazerac kernel: [ 654.916649] atkbd serio0: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
May 5 13:11:40 sazerac kernel: [ 654.916654] atkbd serio0: Use 'setkeycodes e059 <keycode>' to make it known.
May 5 13:11:40 sazerac kernel: [ 654.916997] atkbd serio0: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0).
May 5 13:11:40 sazerac kernel: [ 654.917000] atkbd serio0: Use 'setkeycodes e059 <keycode>' to make it known.
May 5 13:11:40 sazerac /usr/lib/gdm3/gdm-x-session[1439]: (WW) EDID timing clock 141.00 exceeds claimed max 15MHz, fixing
May 5 13:11:40 sazerac /usr/lib/gdm3/gdm-x-session[1439]: (II) modeset(0): EDID vendor "LGD", prod id 1186
May 5 13:11:40 sazerac /usr/lib/gdm3/gdm-x-session[1439]: (II) modeset(0): Printing DDC gathered Modelines:
May 5 13:11:40 sazerac /usr/lib/gdm3/gdm-x-session[1439]: (II) modeset(0): Modeline "1920x1080"x0.0 138.70 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.7 kHz eP)
May 5 13:11:40 sazerac /usr/lib/gdm3/gdm-x-session[1439]: (II) modeset(0): Modeline "1920x1080"x0.0 111.00 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (53.4 kHz e)
May 5 13:11:40 sazerac org.gnome.Shell.desktop[1580]: Window manager warning: Overwriting existing binding of keysym 31 with keysym 31 (keycode a).
May 5 13:11:40 sazerac org.gnome.Shell.desktop[1580]: Window manager warning: Overwriting existing binding of keysym 32 with keysym 32 (keycode b).
May 5 13:11:40 sazerac org.gnome.Shell.desktop[1580]: Window manager warning: Overwriting existing binding of keysym 33 with keysym 33 (keycode c).
May 5 13:11:40 sazerac org.gnome.Shell.desktop[1580]: Window manager warning: Overwriting existing binding of keysym 38 with keysym 38 (keycode 11).
May 5 13:11:40 sazerac org.gnome.Shell.desktop[1580]: Window manager warning: Overwriting existing binding of keysym 39 with keysym 39 (keycode 12).
May 5 13:11:40 sazerac org.gnome.Shell.desktop[1580]: Window manager warning: Overwriting existing binding of keysym 34 with keysym 34 (keycode d).
May 5 13:11:40 sazerac org.gnome.Shell.desktop[1580]: Window manager warning: Overwriting existing binding of keysym 35 with keysym 35 (keycode e).
May 5 13:11:40 sazerac org.gnome.Shell.desktop[1580]: Window manager warning: Overwriting existing binding of keysym 36 with keysym 36 (keycode f).
May 5 13:11:40 sazerac org.gnome.Shell.desktop[1580]: Window manager warning: Overwriting existing binding of keysym 37 with keysym 37 (keycode 10).
Re: Upgrading X220/X230 to FHD 1080p
check the LVDS cable in its socket. I've seen that too.
that's because the login screen displays on the ghost LVDS screen. Solution: coreboot + https://review.coreboot.org/c/coreboot/+/28950/
X220 i7, nitrocaster FullHD mod, coreboot with LVDS patch
Re: Upgrading X220/X230 to FHD 1080p
I found fake displays https://www.youtube.com/watch?v=uVBM7b3 ... e=youtu.be
Does anyone have a display with work adapter LP125WF4-SPB1?
Does anyone have a display with work adapter LP125WF4-SPB1?
Re: Upgrading X220/X230 to FHD 1080p
I'm in the process of installing my mod on my x220. https://www.reddit.com/r/thinkpad/comme ... mod_on_my/
I noticed that in i3-wm running on Arch, things are really only fully functional (more than just a desktop background) if I have an external monitor connected. I read that there's either a kernel patch, or I can flash the bios...today is there a build of coreboot that takes care of this? I'd like to go that route anyway, so I can install my ac wifi card.
I noticed that in i3-wm running on Arch, things are really only fully functional (more than just a desktop background) if I have an external monitor connected. I read that there's either a kernel patch, or I can flash the bios...today is there a build of coreboot that takes care of this? I'd like to go that route anyway, so I can install my ac wifi card.
Re: Upgrading X220/X230 to FHD 1080p
see https://daduke.org/hardware/x220-fhd/noisufnoc wrote: ↑Wed May 08, 2019 10:48 amI'm in the process of installing my mod on my x220. https://www.reddit.com/r/thinkpad/comme ... mod_on_my/
I noticed that in i3-wm running on Arch, things are really only fully functional (more than just a desktop background) if I have an external monitor connected. I read that there's either a kernel patch, or I can flash the bios...today is there a build of coreboot that takes care of this? I'd like to go that route anyway, so I can install my ac wifi card.
X220 i7, nitrocaster FullHD mod, coreboot with LVDS patch
Re: Upgrading X220/X230 to FHD 1080p
ha! I was literally coming back to this thread to say that I found your blog post. Cheers!daduke wrote: ↑Wed May 08, 2019 11:01 amsee https://daduke.org/hardware/x220-fhd/noisufnoc wrote: ↑Wed May 08, 2019 10:48 amI'm in the process of installing my mod on my x220. https://www.reddit.com/r/thinkpad/comme ... mod_on_my/
I noticed that in i3-wm running on Arch, things are really only fully functional (more than just a desktop background) if I have an external monitor connected. I read that there's either a kernel patch, or I can flash the bios...today is there a build of coreboot that takes care of this? I'd like to go that route anyway, so I can install my ac wifi card.
Re: Upgrading X220/X230 to FHD 1080p
actually, now that i found you...daduke wrote: ↑Wed May 08, 2019 11:01 amsee https://daduke.org/hardware/x220-fhd/noisufnoc wrote: ↑Wed May 08, 2019 10:48 amI'm in the process of installing my mod on my x220. https://www.reddit.com/r/thinkpad/comme ... mod_on_my/
I noticed that in i3-wm running on Arch, things are really only fully functional (more than just a desktop background) if I have an external monitor connected. I read that there's either a kernel patch, or I can flash the bios...today is there a build of coreboot that takes care of this? I'd like to go that route anyway, so I can install my ac wifi card.
I saw this comment on your post about disconnecting the power lead on the board, and shorting a pin on the nitrocaster board. If I choose _not_ to do that, I can still use your fork of coreboot, right?
Re: Upgrading X220/X230 to FHD 1080p
yup, just revert back to be3ee1b in this case.
X220 i7, nitrocaster FullHD mod, coreboot with LVDS patch
Re: Upgrading X220/X230 to FHD 1080p
here, yeah? https://github.com/daduke/coreboot/commit/be3ee1b
Re: Upgrading X220/X230 to FHD 1080p
yesnoisufnoc wrote: ↑Wed May 08, 2019 12:31 pmhere, yeah? https://github.com/daduke/coreboot/commit/be3ee1b
X220 i7, nitrocaster FullHD mod, coreboot with LVDS patch
Re: Upgrading X220/X230 to FHD 1080p
thank you!daduke wrote: ↑Wed May 08, 2019 12:45 pmyesnoisufnoc wrote: ↑Wed May 08, 2019 12:31 pm
here, yeah? https://github.com/daduke/coreboot/commit/be3ee1b
Re: Upgrading X220/X230 to FHD 1080p
Здравствуйте и спасибо, Павел!
I got my mod board in a couple weeks ago and immediately installed it and continued to use the native display with no problems while I waited to receive the new one from China. Well, the new display arrived today and, after struggling for a while trying to figure out how the eDP cable worked, plugged it in and... Nothing. I tried it both with and without the LVDS jumper cable and couldn't get any output, so I decided to go back over the solder points to make sure everything was in place and I definitely made some improvements (the smallest thing I had soldered before this was a transistor for an amplifier).
I must have screwed something up during this whole process, because now the backlight on the native LVDS display isn't working either, just a dim picture where the only thing I can make out are the white details.
Here's an album of the board: https://imgur.com/a/GRylH7D
I got my mod board in a couple weeks ago and immediately installed it and continued to use the native display with no problems while I waited to receive the new one from China. Well, the new display arrived today and, after struggling for a while trying to figure out how the eDP cable worked, plugged it in and... Nothing. I tried it both with and without the LVDS jumper cable and couldn't get any output, so I decided to go back over the solder points to make sure everything was in place and I definitely made some improvements (the smallest thing I had soldered before this was a transistor for an amplifier).
I must have screwed something up during this whole process, because now the backlight on the native LVDS display isn't working either, just a dim picture where the only thing I can make out are the white details.
Here's an album of the board: https://imgur.com/a/GRylH7D
Re: Upgrading X220/X230 to FHD 1080p
The backlight fuse may have burned.I must have screwed something up during this whole process, because now the backlight on the native LVDS display isn't working either, just a dim picture where the only thing I can make out are the white details.
All connections must be made without connecting power sources.
On the connector of the lvds there is constantly powering the backlight, which can burn anything.
Many users simply burned laptops with built-in batteries.
-
- Senior Member
- Posts: 581
- Joined: Fri Mar 04, 2016 8:38 am
- Location: Yerevan, Armenia
- Contact:
Re: Upgrading X220/X230 to FHD 1080p
As khseal suggested, this is most likely a blown backlight fuse.
Thanks to fellow thinkpadders from Russia, we got a confirmation that LTN125HL02-301 and LP125WF4-SPB1 work with rev.6 adapter board. I updated the list of supported displays.
Re: Upgrading X220/X230 to FHD 1080p
The backlight fuse may have burned.
All connections must be made without connecting power sources.
On the connector of the lvds there is constantly powering the backlight, which can burn anything.
Many users simply burned laptops with built-in batteries.
Thank you! I solder bridged F1 on the motherboard (just behind the LVDS connecter) and the LVDS display is now functional again! However, the new display is still not working, while I had my DMM out to beep test the fuses on the Mainboard, I went ahead and tested F1 (just above the power-line pad) on the mod board as well and it seems to not be passing current either (all the other resistors are showing a resistance). Could solder-bridging this fix the problem or should I look elsewhere?As khseal suggested, this is most likely a blown backlight fuse.
-
- Senior Member
- Posts: 581
- Joined: Fri Mar 04, 2016 8:38 am
- Location: Yerevan, Armenia
- Contact:
Re: Upgrading X220/X230 to FHD 1080p
You can try bridging F1 on the adapter board just to make sure this is the only problem, but not before checking that there's no short no display power rail after this fuse.
Re: Upgrading X220/X230 to FHD 1080p
Hello guys, I’m new to here.
I decided to install this kit to my x220 even though I was really afraid of ruining my motherboard by the fault of soldering.
As the result, it was failed. I couldn’t solder the sense wire to the 3rd capacitors pad properly and it seems I melted 4th capacitor. I gave up this moment and assembled mine to make sure if it still works. I can turn on and use it as usual.
My question is,
Can I leave it and is it ok to use it as usual?
Can I still try again to upgrade it even if I lost 4th(from right) capacitor? (I’m thinking of asking it to repair shop )
I decided to install this kit to my x220 even though I was really afraid of ruining my motherboard by the fault of soldering.
As the result, it was failed. I couldn’t solder the sense wire to the 3rd capacitors pad properly and it seems I melted 4th capacitor. I gave up this moment and assembled mine to make sure if it still works. I can turn on and use it as usual.
My question is,
Can I leave it and is it ok to use it as usual?
Can I still try again to upgrade it even if I lost 4th(from right) capacitor? (I’m thinking of asking it to repair shop )
-
- Posts: 21
- Joined: Tue Apr 30, 2019 10:32 am
- Location: Prague, CZ
Re: Upgrading X220/X230 to FHD 1080p
I have the similar issue with my second nitrocaster mod, accidentaly desoldered C137, than the other one when trying to resolder C137. I still have heme ,soldering pads seems to be OK - so my questions are
- could this SMD capacitor be damaged by heat? Seems to be ceramic, so could it withstand some more heating?
- if not, is there any equivalent for these caps? I did not found specification for SCD1U10V2KX-4GP
it was much easier the first time I made this mod
- could this SMD capacitor be damaged by heat? Seems to be ceramic, so could it withstand some more heating?
- if not, is there any equivalent for these caps? I did not found specification for SCD1U10V2KX-4GP
it was much easier the first time I made this mod
Proud owner of 701c | 570 | 600E | 600X | 600E | T21 | T40 | T42 | R42 | X220 | X230 nitrocastered | S30 | R51 | X200s | 340 |Yoga 370 |A20m | X40 | R51i
Previously owned A31 | X60s | X41T | X220T | T41 | T43 | R50 | T61 | X301 | T430 |T460 | T550
Previously owned A31 | X60s | X41T | X220T | T41 | T43 | R50 | T61 | X301 | T430 |T460 | T550
Re: Upgrading X220/X230 to FHD 1080p
Ceramic capacitors can be heated.- could this SMD capacitor be damaged by heat? Seems to be ceramic, so could it withstand some more heating?
[/quote]
I think that this is a capacitor 1 uF 10V- if not, is there any equivalent for these caps? I did not found specification for SCD1U10V2KX-4GP
-
- Posts: 6
- Joined: Sat Oct 20, 2018 4:19 pm
- Location: Marbella, Spain
Re: Upgrading X220/X230 to FHD 1080p
I just installed the mod on X230, but no backlight (Screen works, I can see thinkpad logo on boot)
Thought it might be backlight fuse, so I checked them, F6 had no continuity.. so I tried bridging it. Same issue. De-soldered and resoldered the mod, its all fine.. F1 and one marked 'F2' also have continuity.. but still no backlight..
Any other ideas? I dont think this mod can take any more de-re solders!
EDIT: I tried the old screen, and the backlight on that lights just fine
Thought it might be backlight fuse, so I checked them, F6 had no continuity.. so I tried bridging it. Same issue. De-soldered and resoldered the mod, its all fine.. F1 and one marked 'F2' also have continuity.. but still no backlight..
Any other ideas? I dont think this mod can take any more de-re solders!
EDIT: I tried the old screen, and the backlight on that lights just fine
-
- Senior Member
- Posts: 581
- Joined: Fri Mar 04, 2016 8:38 am
- Location: Yerevan, Armenia
- Contact:
Re: Upgrading X220/X230 to FHD 1080p
Missing 3rd or 4th cap is not a problem - just leave it that way. It would be a problem if you were using something larger than FHD, but since this is not the case, you don't really need these 2 caps.
The fuse blew after you connected LVDS cable before removing the battery or the AC adapter. Usually the only victim is the backlight fuse, but in some cases power management IC, PCH or that small MCU on the adapter board dies. You have to remove all power before opening your machine and reconnecting stuff inside it.applicationist wrote: ↑Fri May 17, 2019 4:53 pmI just installed the mod on X230, but no backlight (Screen works, I can see thinkpad logo on boot)
Thought it might be backlight fuse, so I checked them, F6 had no continuity.. so I tried bridging it. Same issue. De-soldered and resoldered the mod, its all fine.. F1 and one marked 'F2' also have continuity.. but still no backlight..
Any other ideas? I dont think this mod can take any more de-re solders!
EDIT: I tried the old screen, and the backlight on that lights just fine
-
- Posts: 6
- Joined: Sat Oct 20, 2018 4:19 pm
- Location: Marbella, Spain
Re: Upgrading X220/X230 to FHD 1080p
Must be something on the adapter board blown then makes sense.
This time with a new mainboard and screen I did everything perfect.. but I probably damaged the adapter with the previous attempt with a faulty screen as I was getting frustrated and fed up thinking I had done it wrong
Ordered another mod.. final attempt before I give up and buy a Mac book
This time with a new mainboard and screen I did everything perfect.. but I probably damaged the adapter with the previous attempt with a faulty screen as I was getting frustrated and fed up thinking I had done it wrong
Ordered another mod.. final attempt before I give up and buy a Mac book
Re: Upgrading X220/X230 to FHD 1080p
Hi nitrocaster,
Have you consider to do WQHD kit ? To be honest, nobody should be interest by such a resolution. The main interest is that WQHD panel cover 100% of sRGB, FHD panel are about 50%.
Have you consider to do WQHD kit ? To be honest, nobody should be interest by such a resolution. The main interest is that WQHD panel cover 100% of sRGB, FHD panel are about 50%.
-
- Senior Member
- Posts: 581
- Joined: Fri Mar 04, 2016 8:38 am
- Location: Yerevan, Armenia
- Contact:
Re: Upgrading X220/X230 to FHD 1080p
If your main consideration is getting 100% sRGB, then you should probably take a look at 13" displays.
Re: Upgrading X220/X230 to FHD 1080p
the 13 inch mod is pretty stupid in my opinion
Will take a look to Chinese mods
Will take a look to Chinese mods
-
- Similar Topics
- Replies
- Views
- Last post
-
- 0 Replies
- 981 Views
-
Last post by danceswithrage
Tue Jan 30, 2024 5:26 pm
-
- 1 Replies
- 558 Views
-
Last post by TPFanatic
Wed Feb 28, 2024 7:06 pm
-
-
Mike mute LED button / Hotkeys integration of X220/X230 not working with Windows 11
by kokkolis » Wed Feb 28, 2024 12:03 pm » in ThinkPad X200/X201/X220 and X300/X301 Series - 2 Replies
- 509 Views
-
Last post by kokkolis
Wed Feb 28, 2024 3:04 pm
-
-
-
FHD+ IGZO panel for P52?
by sz » Tue Oct 17, 2023 4:51 pm » in ThinkPad P1/P40/P50/P70 and later Series - 1 Replies
- 2668 Views
-
Last post by Qrani
Tue Nov 28, 2023 11:08 am
-
Who is online
Users browsing this forum: No registered users and 23 guests