- Timetec Hynix IC
DDR4 • 2400MHz • PC4-19200 • 260 Pin • Unbuffered • Non-ECC • 1.2V • CL16 • Dual Rank • 2Rx8 based • 1024x8 - Kingston Technology HyperX Impact
2400MHz DDR4 CL14 260-Pin - CORSAIR CMSX32GX4M2A2400C16 Vengeance
260-Pin DDR4 SO-DIMM DDR4 2400 (PC4 19200) CL16 1.2V - DATARAM
DDR4 2400Mhz PC4-19200 CL17 SO DIMM - Crucial Memory Module Kit
DDR4, PC4-19200 2400MHz, CL17, SODIMM 260-Pin, x8 Based, Unbuffered, Non-ECC, 1.2V
Take a look at our
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message
x210 Success/Failure reports with memory SODIMMs?
x210 Success/Failure reports with memory SODIMMs?
Anyone have an x210 from nb51 and tried any of these memory sticks? If so please post if you had success and which cpu you have. Also whether you had to remove any head spreader and whether you've had any issues with heat?
Re: x210 Success/Failure reports with memory SODIMMs?
I don't have a 210 but as general advice you'd almost certainly never notice the memory latency difference in actual use. I'd avoid the Timetec/Dataram but Crucial should be fine.
If you can afford it and just want to know you have the fastest then sure get the HyperX.
If you can afford it and just want to know you have the fastest then sure get the HyperX.
Current Thinkpads:
X31, X40, X61T, X61, X201, X220 (i7 IPS), W520 (FHD), T440p (FHD),
T480 (QHD)
Dells: Latitude C840, Precision M70, Precision M4400, M6400 (WUXGA), M6600, M6700, 7730, XPS 13
Daily driver: MS Surface Pro 7 (i7)
X31, X40, X61T, X61, X201, X220 (i7 IPS), W520 (FHD), T440p (FHD),
T480 (QHD)
Dells: Latitude C840, Precision M70, Precision M4400, M6400 (WUXGA), M6600, M6700, 7730, XPS 13
Daily driver: MS Surface Pro 7 (i7)
Re: x210 Success/Failure reports with memory SODIMMs?
I'm using a 2x16GB Kingston HyperX Impact DDR4-2400 CL14 (HX424S14IB/16). Works fine at 2400 MHz without any changes to UEFI firmware as shipped.
This is on a '3rd batch' X210 from Jackie/cnmod.
This is on a '3rd batch' X210 from Jackie/cnmod.
-
- Posts: 30
- Joined: Fri Oct 12, 2018 6:33 am
- Location: Velikiye Luki, Pskov, Russia
Re: x210 Success/Failure reports with memory SODIMMs?
AMD Radeon R7 Performance Series R744G2400U1S-U 4 GB - does not work correctly. Memory errors, system was unstable. Maybe the module itself was defective.
PATRIOT Viper 4 PV416G240C5S DDR4 16 Gb - works fine both at 2400MHz and at 2133MHz
Crucial CT4GSFS8213 2133MHz 4Gb - works fine
PATRIOT Viper 4 PV416G240C5S DDR4 16 Gb - works fine both at 2400MHz and at 2133MHz
Crucial CT4GSFS8213 2133MHz 4Gb - works fine
-
- Junior Member
- Posts: 433
- Joined: Mon Apr 11, 2005 2:24 pm
- Location: Mississauga, Ontario, Canada
Re: x210 Success/Failure reports with memory SODIMMs?
Thanks for the tips, guys.
X62 & X62s & X62T SXGA+ i7 5600u 8-16GB
Helix i7
Carbon X1 i5 UHD
W520 4x-i7
Sony Vaio P799 (8" LED 1600x768)
"Think" Ultrabook i7
LegoThinkpad 11"
in storage:
X131e AMD
X60/X60s, X61/X61s/X61T, T61, T420, X30
past:
X20-X24, 390X
Helix i7
Carbon X1 i5 UHD
W520 4x-i7
Sony Vaio P799 (8" LED 1600x768)
"Think" Ultrabook i7
LegoThinkpad 11"
in storage:
X131e AMD
X60/X60s, X61/X61s/X61T, T61, T420, X30
past:
X20-X24, 390X
-
- Posts: 7
- Joined: Thu May 30, 2019 5:20 am
- Location: zhengzhou, china
Re: x210 Success/Failure reports with memory SODIMMs?
zxzkzkz wrote: ↑Sat Mar 09, 2019 1:12 pmAnyone have an x210 from nb51 and tried any of these memory sticks? If so please post if you had success and which cpu you have. Also whether you had to remove any head spreader and whether you've had any issues with heat?
I'm tempted to go with the most expensive CL14 Kingston even though the "automatic overclocking" is irrelevant just for the CL14 latency and hopefully better quality. But it is a lot more expensive than the Crucial or the "Timetec" or "DATARAM" bargain bin ones.
- Timetec Hynix IC
DDR4 • 2400MHz • PC4-19200 • 260 Pin • Unbuffered • Non-ECC • 1.2V • CL16 • Dual Rank • 2Rx8 based • 1024x8- Kingston Technology HyperX Impact
2400MHz DDR4 CL14 260-Pin- CORSAIR CMSX32GX4M2A2400C16 Vengeance
260-Pin DDR4 SO-DIMM DDR4 2400 (PC4 19200) CL16 1.2V- DATARAM
DDR4 2400Mhz PC4-19200 CL17 SO DIMM- Crucial Memory Module Kit
DDR4, PC4-19200 2400MHz, CL17, SODIMM 260-Pin, x8 Based, Unbuffered, Non-ECC, 1.2V
DDR4 2400 is OK ,the CORSAIR is ok ,I have tested .
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Thinkpad P71/Xeon (with ECC memory) - can I use two 32GB SODIMMS?
by wb0gaz_h » Thu Nov 02, 2023 5:05 pm » in ThinkPad P1/P40/P50/P70 and later Series - 0 Replies
- 3345 Views
-
Last post by wb0gaz_h
Thu Nov 02, 2023 5:05 pm
-
-
-
Possibly missing SMD resistor on X210 board
by yitzhaq » Wed Nov 08, 2023 6:28 pm » in 51nb and other modded Thinkpads - 16 Replies
- 6391 Views
-
Last post by 755cdxd
Wed Jan 10, 2024 6:39 am
-
-
-
X1 Carbon Gen 6 WQHD upgrade success
by plympton » Wed Jan 03, 2024 2:28 pm » in ThinkPad X1 / X1-Carbon / X1-Extreme and later Series - 3 Replies
- 16661 Views
-
Last post by RealBlackStuff
Fri Jan 12, 2024 3:31 am
-
-
-
701c screen distortion- gpu or screen failure??
by nicefisher » Fri Feb 16, 2024 12:50 pm » in ThinkPad Legacy Hardware - 3 Replies
- 911 Views
-
Last post by astral
Wed Feb 21, 2024 11:07 am
-
Who is online
Users browsing this forum: marwypies and 14 guests