Take a look at our
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message
a new age for my frankenpad T601 X9000, w7 pro to W10 pro
a new age for my frankenpad T601 X9000, w7 pro to W10 pro
hello people
it is my intention of using this weekend to upgrade my X9000 T601 Frankenpad from W7 to W10
i know i can install W10 on it , since I already upgraded a low spec T60 to W10, but that was not my machine, so I didnt have much time to spend and tweak it , so all I know is that the system was booting all fine and dandy, but I did install the vantage software and it didnt find any drivers for the machine, which was not a surprise since w10 is not supported on that machine. so I am expecting the same problem with the T601, no drivers to be found with the vantage app.
did anyone else upgrade its frankenpad to W10? which is the best driver route to go, sources etc, what are the must haves and what is not important?
EDIT: in built my Frankie with the intel video card, not the nvidia, so i dont need nvidia drivers., albeit some people might be interested in that too.
thanks in advance
it is my intention of using this weekend to upgrade my X9000 T601 Frankenpad from W7 to W10
i know i can install W10 on it , since I already upgraded a low spec T60 to W10, but that was not my machine, so I didnt have much time to spend and tweak it , so all I know is that the system was booting all fine and dandy, but I did install the vantage software and it didnt find any drivers for the machine, which was not a surprise since w10 is not supported on that machine. so I am expecting the same problem with the T601, no drivers to be found with the vantage app.
did anyone else upgrade its frankenpad to W10? which is the best driver route to go, sources etc, what are the must haves and what is not important?
EDIT: in built my Frankie with the intel video card, not the nvidia, so i dont need nvidia drivers., albeit some people might be interested in that too.
thanks in advance
W530, 3840QM, 32GB, K2000M
P1, XEON 2176, 32GB ECC, P2000, IPS
X230, 3320M, 16GB, HD4000, IPS
T601F X9000, 8GB, X3100, UXGA FlexView 1600x1200
T61 14" 4:3, T9500, 8GB, NVS140M
T60 14" 4:3, T7600, 3GB, GMA950
P71, 7700HQ, 16GB, P600, IPS
T470 6300U
R61i, T430s
RIP: T43p, X201
P1, XEON 2176, 32GB ECC, P2000, IPS
X230, 3320M, 16GB, HD4000, IPS
T601F X9000, 8GB, X3100, UXGA FlexView 1600x1200
T61 14" 4:3, T9500, 8GB, NVS140M
T60 14" 4:3, T7600, 3GB, GMA950
P71, 7700HQ, 16GB, P600, IPS
T470 6300U
R61i, T430s
RIP: T43p, X201
Re: a new age for my frankenpad T601 X9000, w7 pro to W10 pro
UPDATE, in order to prep myself to transition my T601 to W10 i used the test bed the T60 low spec to do the same, w10 installed and most things work fine, I also installed thinkvantage but the green battery gauge doest appear, no matter what driver I use, it will not install the green gauge. The thing is I have a P1 and a W530 with Win 10 installed and both of them have the green battery gauge functional, on clicking on it , it opens a small window where i can either click to see battery details or i can set setting for camera, microphone , eye care mode or simply go directly to vantage to access all settings. so the P1 and W530 works fine, However on the X230 I didnt manage to install it either, just like the T60, the T60 may not be supported by lenovo for win 10, but the X230 is supported, and its from same generation as is the W530.
I dont understand what is going on, and what im doing wrong.
I dont understand what is going on, and what im doing wrong.
W530, 3840QM, 32GB, K2000M
P1, XEON 2176, 32GB ECC, P2000, IPS
X230, 3320M, 16GB, HD4000, IPS
T601F X9000, 8GB, X3100, UXGA FlexView 1600x1200
T61 14" 4:3, T9500, 8GB, NVS140M
T60 14" 4:3, T7600, 3GB, GMA950
P71, 7700HQ, 16GB, P600, IPS
T470 6300U
R61i, T430s
RIP: T43p, X201
P1, XEON 2176, 32GB ECC, P2000, IPS
X230, 3320M, 16GB, HD4000, IPS
T601F X9000, 8GB, X3100, UXGA FlexView 1600x1200
T61 14" 4:3, T9500, 8GB, NVS140M
T60 14" 4:3, T7600, 3GB, GMA950
P71, 7700HQ, 16GB, P600, IPS
T470 6300U
R61i, T430s
RIP: T43p, X201
-
- Admin Emeritus
- Posts: 23809
- Joined: Mon Sep 18, 2006 5:17 am
- Location: Loch Garman, Éire
Re: a new age for my frankenpad T601 X9000, w7 pro to W10 pro
Your Frankie is no longer a T60, it is now a T61 with a T60 dress.
So expect different when you go down the W10 path.
So expect different when you go down the W10 path.
Lovely day for a Guinness! (The Real Black Stuff)
Lenovo: X240, X250, T440p, T480, M900 Tiny.
PS: the old Boardroom website is still available on the Wayback Machine.
Lenovo: X240, X250, T440p, T480, M900 Tiny.
PS: the old Boardroom website is still available on the Wayback Machine.
Re: a new age for my frankenpad T601 X9000, w7 pro to W10 pro
Probably a bit late to help but I find that W10 loads its own drivers and that is all that is necessary. I steer clear of ThinkVantage bloatware and use iobit's DriverBooster if I want to check for later drivers. I have loaded the W7 video drivers in the past to try and improve the VGA resolution and this does help a bit. TPFanControl is a must as well.
Where to begin......
390e FOR SALE : GONE
1 x T20 : SOLD
1 X T23 + 3 breaking for parts
1 X T23 with Samsung 840 SSD and XP Great combination !: SOLD
1 X T60
3 X T61
1 X T601 15"
1 X T520
2 X T530
390e FOR SALE : GONE
1 x T20 : SOLD
1 X T23 + 3 breaking for parts
1 X T23 with Samsung 840 SSD and XP Great combination !: SOLD
1 X T60
3 X T61
1 X T601 15"
1 X T520
2 X T530
Re: a new age for my frankenpad T601 X9000, w7 pro to W10 pro
my main problem right now is the battery gauge, no matter what I do, I cant install it. weird, since 2 other thinkpad machines have it in W10JBUK wrote: ↑Sun Jan 12, 2020 6:56 pmProbably a bit late to help but I find that W10 loads its own drivers and that is all that is necessary. I steer clear of ThinkVantage bloatware and use iobit's DriverBooster if I want to check for later drivers. I have loaded the W7 video drivers in the past to try and improve the VGA resolution and this does help a bit. TPFanControl is a must as well.
W530, 3840QM, 32GB, K2000M
P1, XEON 2176, 32GB ECC, P2000, IPS
X230, 3320M, 16GB, HD4000, IPS
T601F X9000, 8GB, X3100, UXGA FlexView 1600x1200
T61 14" 4:3, T9500, 8GB, NVS140M
T60 14" 4:3, T7600, 3GB, GMA950
P71, 7700HQ, 16GB, P600, IPS
T470 6300U
R61i, T430s
RIP: T43p, X201
P1, XEON 2176, 32GB ECC, P2000, IPS
X230, 3320M, 16GB, HD4000, IPS
T601F X9000, 8GB, X3100, UXGA FlexView 1600x1200
T61 14" 4:3, T9500, 8GB, NVS140M
T60 14" 4:3, T7600, 3GB, GMA950
P71, 7700HQ, 16GB, P600, IPS
T470 6300U
R61i, T430s
RIP: T43p, X201
Re: a new age for my frankenpad T601 X9000, w7 pro to W10 pro
W10 does not support the chip installed in T60 or T61; I'm not sure about T500/W500/R500 but would expect it not to work as well. Not every thinkpad is the same after all.
Too many thinkpads not enough time!
(stable under reduction)
(stable under reduction)
Re: a new age for my frankenpad T601 X9000, w7 pro to W10 pro
i dont think the chip or the generation is the problem, my W530 has the gauge, the X230 (same generation as the W530) does not, but the older X201 has it. we are missing something.
W530, 3840QM, 32GB, K2000M
P1, XEON 2176, 32GB ECC, P2000, IPS
X230, 3320M, 16GB, HD4000, IPS
T601F X9000, 8GB, X3100, UXGA FlexView 1600x1200
T61 14" 4:3, T9500, 8GB, NVS140M
T60 14" 4:3, T7600, 3GB, GMA950
P71, 7700HQ, 16GB, P600, IPS
T470 6300U
R61i, T430s
RIP: T43p, X201
P1, XEON 2176, 32GB ECC, P2000, IPS
X230, 3320M, 16GB, HD4000, IPS
T601F X9000, 8GB, X3100, UXGA FlexView 1600x1200
T61 14" 4:3, T9500, 8GB, NVS140M
T60 14" 4:3, T7600, 3GB, GMA950
P71, 7700HQ, 16GB, P600, IPS
T470 6300U
R61i, T430s
RIP: T43p, X201
Re: a new age for my frankenpad T601 X9000, w7 pro to W10 pro
Just install Lenovo Vantage, and let it bring whatever system foundation package it needs. After that, enable Battery Bar through Lenovo Vantage, make sure it works, then, if you want, uninstall Lenovo Vantage. The gauge will remain, although you won't be able to tweak/access certain settings.
Thinkpad 25 (20K7), T490 (20N3), Yoga 14 (20FY), T430s (IPS FHD + Classic Keyboard), X220 4291-4BG
X61 7673-V2V, T60 2007-QPG, T42 2373-F7G, X32 (IPS Screen), A31p w/ Ultrabay Numpad
X61 7673-V2V, T60 2007-QPG, T42 2373-F7G, X32 (IPS Screen), A31p w/ Ultrabay Numpad
-
- Posts: 13
- Joined: Tue Jan 21, 2020 4:08 pm
- Location: Albany, NY
Re: a new age for my frankenpad T601 X9000, w7 pro to W10 pro
What exactly do you mean? One should have no problems running an x9000 on windows 10. Matter of fact I've done that install on a number of T61s w/ x9000s without issue so it seems windows 10 has no problem with the chip, at least from my perspective.
In reference to the x9000 and T61... Not a match made in heaven, that's for sure. I used to have a T61p running the (X9000) and I found it difficult to keep the temps down despite a brand new cooler, high quality thermal paste, and fan control software (tpfancontrol). `
Sometimes just lite browsing or lite gaming makes it go nuclear, even with the fan at full throttle. The reality of the situation is that the X9000 is a voltage hungry / hotter running CPU and has a much higher TDP (45W IIRC?) relative to the T9300/T9500. And you can't just drop voltage and expect manageable temps. Because even undervolted to 1.0500 volts it can still fry an egg. The T61p's cooler was only designed to handle 35 watts, like a T9500 at the maximum. SO anything over 35W TDP should be avoided. If you are hellbent on keeping it, the only alternative would require extensive CPU cooler upgrades, and that would be basically impossible given the space constraints under the hood of a T61p.. You must also keep in mind the stock CPU cooler also has to deal with a power hungry and hot running GPU, so adding more heat to the mix is not a good idea. The only remaining option would be a laptop cooler and that can be cumbersome. It's just a band aid.
Sure the X9000 is cool for bragging rights, but you really should be running a T9300 or T9500. Using throttle stop and dual IDA mode you can get a slight overclock to 2.7Ghz and 2.8Ghz, respectively. Undervolting is also possible with both of these chips and they will perform flawlessly even at much lower voltages.
Re: a new age for my frankenpad T601 X9000, w7 pro to W10 pro
Battery control via power manager was not possible in those systems under W10 as far as I recall. This is just something out of the head, kind of hint, I'm not 100% sure.
Not quite. Take note that just the fx570m generates 35W.Night_Ranger wrote: ↑Tue Jan 21, 2020 4:45 pmThe T61p's cooler was only designed to handle 35 watts, like a T9500 at the maximum.
Well I was able to tune my cooling system to work with X9000 (15,4" fx570m unit), and under load high 70s/low 80s were typical. After OC up to 3.4GHz (can't remind exact voltage) it ran in the mid-to-high 80s. All that in synthetical test (Furmark + Orthos CPU loader). Penryn, post-0808 board. Try to check for another heatsink. Swap fan with the one from T500 if this one is too loud. Use top thermal compound. Check whether the bracket generates enough pressure to keep heatsink pressed-on the CPU.Night_Ranger wrote: ↑Tue Jan 21, 2020 4:45 pmSure the X9000 is cool for bragging rights, but you really should be running a T9300 or T9500. Using throttle stop and dual IDA mode you can get a slight overclock to 2.7Ghz and 2.8Ghz, respectively. Undervolting is also possible with both of these chips and they will perform flawlessly even at much lower voltages.
Too many thinkpads not enough time!
(stable under reduction)
(stable under reduction)
-
- Senior ThinkPadder
- Posts: 2484
- Joined: Tue Sep 22, 2015 10:59 pm
- Location: Toronto, Canada
Re: a new age for my frankenpad T601 X9000, w7 pro to W10 pro
I have an X9000 at 3.4Ghz (Multiplier 17) as well, my voltage is 1.2625V (any lower it would crash eventually). It's on a Dell but I assume on T61 the voltage required won't be any different.wujstefan wrote: ↑Wed Jan 22, 2020 7:48 amWell I was able to tune my cooling system to work with X9000 (15,4" fx570m unit), and under load high 70s/low 80s were typical. After OC up to 3.4GHz (can't remind exact voltage) it ran in the mid-to-high 80s. All that in synthetical test (Furmark + Orthos CPU loader). Penryn, post-0808 board. Try to check for another heatsink. Swap fan with the one from T500 if this one is too loud. Use top thermal compound. Check whether the bracket generates enough pressure to keep heatsink pressed-on the CPU.
In fact, I have two X9000 chips and both run fine at 3.4Ghz and 1.2625V.
Dell Lat CP MMX-233 64mb 40gb W2k
600 PII-266 416mb 40gb WXP
T23 PIII 1.13ghz 1gb W7
Precision M4300 X9000 8gb 160gb WUXGA Ultrasharp fp W10
T530i 15.6" i7 16gb fp W10
UXGA:
A30p PIII 1.2 1gb W7 (IDTech)
T43p 2.26 2gb fp W10 (Sharp)
Lat C840 P4-2.5 2gb 60gb W7 (Ultrasharp)
600 PII-266 416mb 40gb WXP
T23 PIII 1.13ghz 1gb W7
Precision M4300 X9000 8gb 160gb WUXGA Ultrasharp fp W10
T530i 15.6" i7 16gb fp W10
UXGA:
A30p PIII 1.2 1gb W7 (IDTech)
T43p 2.26 2gb fp W10 (Sharp)
Lat C840 P4-2.5 2gb 60gb W7 (Ultrasharp)
-
- Similar Topics
- Replies
- Views
- Last post
-
-
WTB: BOE Hydis HV150UX2-100 for Frankenpad T601
by cutrus » Fri Mar 08, 2024 12:48 pm » in Marketplace - Forum Members only - 0 Replies
- 121 Views
-
Last post by cutrus
Fri Mar 08, 2024 12:48 pm
-
-
-
WTB: Frankenpad IBM T601f with 15" Hydis HV150UX2-100 UXGA LED
by vondobrzyn » Mon Nov 06, 2023 12:36 pm » in Marketplace - Forum Members only - 4 Replies
- 2395 Views
-
Last post by Backslashnl1
Fri Dec 29, 2023 11:20 am
-
-
-
[SOLD]: Frankenpad IBM T60 / T61 15" UXGA LED, T9500, 8GB, 256GB SSD
by Backslashnl1 » Sat Dec 30, 2023 10:00 am » in Marketplace - Forum Members only - 2 Replies
- 1490 Views
-
Last post by Backslashnl1
Sun Dec 31, 2023 8:05 am
-
-
-
T14 Gen3 (Intel) and SSD Samsung 990 Pro 4TB
by Jan_888 » Tue Feb 13, 2024 5:54 pm » in Thinkpad T14/T15/T16 - 1 Replies
- 556 Views
-
Last post by ZaZ
Thu Feb 15, 2024 7:56 pm
-
Who is online
Users browsing this forum: No registered users and 62 guests