- Senior Member
- Posts: 947
- Joined: Tue Nov 06, 2012 9:22 pm
- Location: San Diego, California
Code: Select all
/usr/share/X11/xorg.conf.d/20-thinkpad.conf Section "InputClass" Identifier "TPPS/2 IBM TrackPoint" Driver "libinput" MatchIsPointer "yes" Option "AccelProfile" "flat" Option "AccelSpeed" "-0,3" EndSection
Code: Select all
xinput --set-prop 'TPPS/2 IBM TrackPoint' 'libinput Accel Profile Enabled' 0, 1 xinput --set-prop 'TPPS/2 IBM TrackPoint' 'libinput Accel Speed' -0.2
ThinkPad X230: i5-3320M CPU 3.3GHz - 8GB RAM 1600 MHz - SSD 860 EVO 500GB - Debian - ME_cleaned
- Junior Member
- Posts: 428
- Joined: Mon Apr 11, 2005 2:24 pm
- Location: Mississauga, Ontario, Canada
My history: I'm an old-school linux and thinkpad user. Been using linux exclusively on all my thinkpads since 2012. I always use the trackpoint and disable or not use the trackpad whenever possible. I also use the "middle button scroll" functionality that any old-school Thinkpad user would be very aware of.
The issue starting in kernel 4.19 is related to "improvements" for the trackpad. A bunch of driver changes and updates. It is affecting the trackpoint, unfortunately.
But users are affected in different ways, based on what machine they have.
If you have a machine without a trackpad (such as X61 etc) or a machine where you disable the trackpad in the BIOS, you won't be affected at all.
If you have a newer machine, you might notice the trackpad has become a nuisance to your use of the trackpoint. Finger resting and other things are an issue now if your trackpad is not disabled. On systems where the trackpoint buttons are separate from the trackpad, you can disable the trackpad completely with "xinput disable X" where X is the ID of the trackpad. If you are not using the "Synaptics" driver (you use the psmouse driver instead -- since you don't use the trackpad), the trackpad does not show up as an option in the mouse applet, so you can't disable it from there but you can disable it using xinput.
If you have one of those cursed thinkpads where the trackpoint buttons are integrated into the trackpad, you are going to have issues. With finger gestures features in 4.19, they force you to switch to the "Synaptics" drivers to be able to disable the touch area of the trackpad so that you can disable the trackpad accidentally taking your fingers resting on it while using the trackpoint. The issue with being forced to use the Synaptics driver is that the middle button scroll is no longer possible. There is no way to tweak to get this functionality anymore. Also, because of the forced changes for the finger gestures, there is no way to use the non Synamptic driver that provided the ability to enable the middle button scroll unless you can train your fingers to hover over the trackpad, never touching it. Resting your fingers on it will detect it as a click, double click, right, click, etc. If you completely disable the trackpad, you will lose your trackpoint buttons. Some of the Thinkpads with these cursed trackpads have replacement parts to substitute with traditional split button layout. My Carbon Gen2 I had replaced with this fixed trackpad shortly after it was released as an orderable part. However, not all Thinkpads that had this trackpad have such a part, and the part is not interchangeable from other lines. One such Thinkpad, the Helix i7 that I still use daily has this issue. It has no available part with the corrected trackpad, and the trackpads from other models do not have the same cable pinout, so they cannot be used. The only solution, if you are one such user in the same situation as me, is to drop down to an older kernel (< 4.19).
To end off, for those who have not yet discovered the method to enable the middle button scroll, you want to create a file in /etc/X11/xorg.conf.d/90-evdev-trackpoint.conf with the following contents:
Option "EmulateWheel" "1"
Option "EmulateWheelButton" "2"
Option "XAxisMapping" "6 7"
Carbon X1 i5 UHD
Sony Vaio P799 (8" LED 1600x768)
"Think" Ultrabook i7
X60/X60s, X61/X61s/X61T, T61, T420, X30
Linux still seems to be out in left field as a mainstream O/S and always will be until they get it to run turn-key with business and consumer computers. I don't think it will ever become a turn-key O/S.
If I have to type in 10 lines of code to get something to work as designed, I'll pass. Thank you very much.
It isn't that I can't do it, it's that I don't want to, nor do I think I should have to.
T500 T9600 2055-BE9
T510 i5 4384-DV7
T510 i7 4349-A64
T520 i7QM 4242-4UU Highly Modified
- Similar Topics
- Last post
Who is online
Users browsing this forum: No registered users and 16 guests