Then I would follow through with installs of XP, 7, and finally Windows 10. I would really like a modern, 64 bit platform and a useable backup PC for this device, rather than continuing to use an archiac, cumbersome Mac G4 tower whose only purpose is to run that particular scanner.
- Senior ThinkPadder
- Posts: 2701
- Joined: Mon May 28, 2012 5:49 am
- Location: Metro Manila, Philippines
Backup: X601 Core 2 Duo T8100
Toy: X60F Core Solo U1300
On loan: X220 4291-P79 i5-2520M
In pieces: two retired but working X61Ts
RIP: 760XD 9546-U9E; X61 7676-A24; and a BOE-Hydis HV121P01-100 in failed SXGA+ mod
First installing from XP to 7, and finally, 10. I suppose starting at 2000 and working forward wouldn't hurt anything.
Not elegant, and a bummer to only run 4 gigabytes of ram, but the footprint of the T61 permanently docked and plugged into the scanner is significantly less than a Mac G4 Tower. The 16:9 t61 machines are easy to come by.
- Posts: 16930
- Joined: Sun Feb 25, 2007 11:28 am
- Location: Brodheadsville, Pennsylvania, USA
Are they ? That sounds strange since no T61 was ever made in a 16:9 format...
16:10 is what you're looking at. Big difference.
George (your grouchy retired FlexView farmer)
FlexView AARP club members:A31p, T43pSF
Abused daily: T520, X200s
PMs requesting personal tech support will be ignored.
I found a very good post / guide about using Imacon Scanners, Adaptec cards, 64 bit Windows, and the T61 in specific. There are many varying opinions on the topic. It can be done in a 64 bit Windows OS, but only in 32 bit compatibility mode. Some say special commands and simple software reprogramming will do the trick, while others insist it should be a fairly straight shot. All I know is that I want an updatable machine to do this task and not a 20 year old Mac huffing and puffing just to transfer 50 and 100 megabyte files through a USB 1.0 port.
https://www.photo.net/discuss/threads/i ... it.450338/
- Similar Topics
- Last post
Who is online
Users browsing this forum: No registered users and 43 guests