Take a look at our
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message
Considerations for using CF-IDE adapters
-
- Posts: 5
- Joined: Thu Apr 12, 2018 5:01 am
- Location: Brisbane, Australia
Considerations for using CF-IDE adapters
Hi all,
I'm considering buying one of these each for my G40 and 600E, with the intent of installing 98/2000 on them.
https://www.aliexpress.com/item/3283846 ... 50-RLziiwM
However, before forking out my money, is there anything I should be aware of, in terms of extra adapters required or otherwise? Looking for the cheapest option really.
Thanks
I'm considering buying one of these each for my G40 and 600E, with the intent of installing 98/2000 on them.
https://www.aliexpress.com/item/3283846 ... 50-RLziiwM
However, before forking out my money, is there anything I should be aware of, in terms of extra adapters required or otherwise? Looking for the cheapest option really.
Thanks
Re: Considerations for using CF-IDE adapters
The VOGONS forums are probably the best source of information for such questions. I never tried one myself.
Thinkpad 25 (20K7), T490 (20N3), Yoga 14 (20FY), T430s (IPS FHD + Classic Keyboard), X220 4291-4BG
X61 7673-V2V, T60 2007-QPG, T42 2373-F7G, X32 (IPS Screen), A31p w/ Ultrabay Numpad, A21m 2628-GXU
X61 7673-V2V, T60 2007-QPG, T42 2373-F7G, X32 (IPS Screen), A31p w/ Ultrabay Numpad, A21m 2628-GXU
Re: Considerations for using CF-IDE adapters
I've used such an adapter in my X40 for many years. Works great. Only gotcha is it's very difficult to install in the drive bay. One basically has to remove case plastic to gain access to the IDE connector. That's about my only option with the X40, but with other devices with a full size HDD slot, I would recommend an adapter with a case or a dual CF card adapter something like this: https://www.amazon.com/Micro-SATA-Cable ... 07&sr=8-18
Collection = T430 - T500 - R400 - X300 - T61 (14" WXGA+) - R61 (15" SXGA+) - T60 - X40 - T43p - T43 - T42p - A30P
-
- ThinkPadder
- Posts: 1339
- Joined: Fri May 27, 2011 9:19 pm
- Location: Florida
Re: Considerations for using CF-IDE adapters
Neil, how is the speed on one of those?
600, 600X
760LD FUBARd
T21 2647 T22 2647 1@ 1GHz SXGA+ 4 more; T23 2647 1@ 1.2GHz SXGA+ 3 more
T30 2366-88U 2GHz; 2366-83U 1.8G; 5@ 2366-LU0/66U; 2367-KU6 FUBARd
T41 T42 T43
T61 8897 2.4GHz SXGA+; 8898 2.4Ghz; 6463 2@ WSXGA+; 7658 2.5GHz; T61p; 6 more T61s
T500 2
T530 W530
760LD FUBARd
T21 2647 T22 2647 1@ 1GHz SXGA+ 4 more; T23 2647 1@ 1.2GHz SXGA+ 3 more
T30 2366-88U 2GHz; 2366-83U 1.8G; 5@ 2366-LU0/66U; 2367-KU6 FUBARd
T41 T42 T43
T61 8897 2.4GHz SXGA+; 8898 2.4Ghz; 6463 2@ WSXGA+; 7658 2.5GHz; T61p; 6 more T61s
T500 2
T530 W530
Re: Considerations for using CF-IDE adapters
Well, I can't really comment much on the speed, as it's the only drive I've ever had in the X40. So there is nothing for me to compare to other than other ThinkPads of similar vintage that are running spinning IDE HDDs. And to me performance is about the same. The X40 with CF card probably lags a little more that the others at times, but it's all purely subjective, as I've never measured anything.
Given the choice, I would choose a "real" hard drive every time. But, for the X40, at the time (many years ago), CF adapter was the only affordable option. And it worked. I've been using it (on my second CF card, first wore out) for several years with various Linux distributions. Even ran Win XP for a while some years ago, but that was more trouble than it was worth.
Given the choice, I would choose a "real" hard drive every time. But, for the X40, at the time (many years ago), CF adapter was the only affordable option. And it worked. I've been using it (on my second CF card, first wore out) for several years with various Linux distributions. Even ran Win XP for a while some years ago, but that was more trouble than it was worth.
Collection = T430 - T500 - R400 - X300 - T61 (14" WXGA+) - R61 (15" SXGA+) - T60 - X40 - T43p - T43 - T42p - A30P
-
- ThinkPadder
- Posts: 1172
- Joined: Fri Oct 11, 2013 7:45 pm
- Location: North Ridgeville, Ohio, United States
Re: Considerations for using CF-IDE adapters
I have something like this in my X41T. The main thing is the CF card you use needing to report itself as a fixed disk, not removable; I tried upgrading to something bigger than the tiny 16GB CF card that was in it when I acquired it, and the 64GB SanDisk card I used did not work...
Here's an article that may yield some mental nuggets on the topic: https://www.daniel-boehmer.de/thinkpad-cf/
Here's an article that may yield some mental nuggets on the topic: https://www.daniel-boehmer.de/thinkpad-cf/
T480 with T25 keyboard | T25 | W520 i7-2860QM·Quadro 2000m·IPS FHD | T601F T9900·NVS 140m·LED AFFS UXGA
T420 IPS FHD | X220 IPS FHD | T61p·T61·43·42p|X220T·301·41T·24·23·22|G41|A31p·22m|i1200|TransNote
600|770Z|770E|760XD|760EL|365XD|701C|755C
T420 IPS FHD | X220 IPS FHD | T61p·T61·43·42p|X220T·301·41T·24·23·22|G41|A31p·22m|i1200|TransNote
600|770Z|770E|760XD|760EL|365XD|701C|755C
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Any considerations when looking for a W530?
by wrybread » Sat Jan 09, 2021 10:27 pm » in ThinkPad W530/W540/W541/W550 Series - 9 Replies
- 933 Views
-
Last post by KDM Mods
Wed Jan 13, 2021 10:11 am
-
-
-
UATA (IDE) to SATA adapters (split from marketplace)
by Behemot » Tue Sep 01, 2020 10:48 am » in Thinkpad - General HARDWARE/SOFTWARE questions - 3 Replies
- 1868 Views
-
Last post by cadillacmike68
Tue Sep 01, 2020 10:04 pm
-
-
-
Recommend a reliable IDE-usb adapter
by vanillagod » Sun Jan 10, 2021 9:45 pm » in Thinkpad - General HARDWARE/SOFTWARE questions - 4 Replies
- 519 Views
-
Last post by cadillacmike68
Mon Jan 11, 2021 7:32 pm
-
-
-
FS: 4x used (tested ok)HDD (IBM) DYLA-28100 ATA/IDE 4900 RPM
by friedrich-eugen » Sun Jan 24, 2021 10:02 am » in Marketplace - Forum Members only - 0 Replies
- 122 Views
-
Last post by friedrich-eugen
Sun Jan 24, 2021 10:02 am
-
Who is online
Users browsing this forum: No registered users and 8 guests