Take a look at our
ThinkPads.com HOME PAGE
For those who might want to contribute to the blog, start here: Editors Alley Topic
Then contact Bill with a Private Message

X61 stripped mPCIe screws

X60/X61 series specific matters only.
Post Reply
Message
Author
nico75
Posts: 6
Joined: Tue Mar 21, 2017 2:04 pm
Location: Paris, France

X61 stripped mPCIe screws

#1 Post by nico75 » Mon Jun 29, 2020 3:42 pm

Hello,

A first post about my new X61, a worse intro than I would have hoped :?

I tried to remove the wifi card from mPCIe socket (the socket supprting mPCIe ?) and just stripped the screws.
Before destroying everything or putting metal chips everywhere, I'm asking for help on how to remove this card ?

On solution would be to break the corner of the card and all around the hole to get enough space to use a small plier to turn the screws. but If I can skip the destructive phase it may be better.

Any idea ?

Thanks a lot

the picture :
https://ibb.co/zfzcrZn
Last edited by nico75 on Tue Jun 30, 2020 2:39 pm, edited 1 time in total.
X220 - main / X230 - next computer / X61T - old for sale / X61 - T9300 lastest buy upgrade in progress :banana:

kfzhu1229
ThinkPadder
ThinkPadder
Posts: 1777
Joined: Tue Sep 22, 2015 10:59 pm
Location: Toronto, Canada

Re: X61 stripped mPCIe screws

#2 Post by kfzhu1229 » Mon Jun 29, 2020 3:47 pm

Try dripping some WD40 into the screw pole, let it sit for a few minutes and see if that can loose up the Threadlocker on the screw
Dell Lat CP MMX-233 64mb 40gb W2k
600 PII-266 416mb 40gb WXP
T23 PIII 1.13ghz 1gb W7
Lat D830 X9000 8gb 160gb WUXGA Ultrasharp fp W10
T530i 15.6" i7 16gb fp W10
UXGA:
A30p PIII 1.2 1gb W7 (IDTech)
T43p 2.26 2gb fp W10 (Sharp)
Lat C840 P4-2.5 2gb 60gb W7 (Ultrasharp)

Droider
Sophomore Member
Posts: 143
Joined: Sun May 08, 2016 3:47 pm
Location: Istanbul

Re: X61 stripped mPCIe screws

#3 Post by Droider » Mon Jun 29, 2020 7:08 pm

Is it just the stripped screws or did you break the screw holes that supports them on the bottom base ?

1- Stripped screws removal should be easy as it is wide open area once the palmrest is removed, use small long nose pliers to grip screws.
2- If the bottom holes are destoyed, use a small flathead screw driver under the screws forcing it towards you and use the long line pliers to prevent it turning empty.
Everyday tp ; Thinkpad E15, Ryzen7-4700u, 16gb, 1080p panel, 512gb nvme.

Spare wheel : T440p, i7-4700mq, 1080p lg panel, 16 gb, 500gb 860 evo, intel 4600 gpu
My Thinkpads at the moment
T61 Nvs140m, T42P UXGA, T43 14.1" X300, T43 14.1" gma900, X60s, X61 T8300, X32, T23..

Kingair
Freshman Member
Posts: 83
Joined: Mon Apr 20, 2020 3:00 pm
Location: Mexicali, MX (Coachella)

Re: X61 stripped mPCIe screws

#4 Post by Kingair » Mon Jun 29, 2020 7:17 pm

Put a rubber band between the tip of your screwdriver and the screw
Or use superglue as mentioned above
BTW: did it happened on your X61 T9300 ?

RealBlackStuff
Admin Emeritus
Admin Emeritus
Posts: 21597
Joined: Mon Sep 18, 2006 5:17 am
Location: Dublin, Éire
Contact:

Re: X61 stripped mPCIe screws

#5 Post by RealBlackStuff » Tue Jun 30, 2020 12:39 am

Using rubber band and superglue are old wives' tales and absolutely useless.

Get a Dremel with a cutting disc like this: http://www.ebay.com/itm/233584743986
Cut a small groove in the screw (not all the way through!).
Then use a straight screwdriver to remove the screw.
Make sure to tape off the surroundings to avoid metal dust flying into the laptop.

See also this: /viewtopic.php?f=2&t=81377
NOT a great day for a Guinness! (the Real Black Stuff).
Ireland is on FULL lockdown till December 2020!
Covid-19: Mask it or Casket!
Check out The Boardroom for Mods and Other Services.

Brad
**SENIOR** Member
**SENIOR** Member
Posts: 1893
Joined: Tue Mar 29, 2005 12:41 am
Location: Long Island New York

Re: X61 stripped mPCIe screws

#6 Post by Brad » Tue Jun 30, 2020 3:22 am

I worked with Edward (OP on linked topic) back in 2010 to remove the wifi card in his X61 using this. Back in 2010 I paid $19.99. More today but worth it for this issue.

The screws are soft aluminum with a very shallow head that is very easy to strip as you found out.

Worked nicely.

Brad
Long Island New York
T43p 2669-Q1U, A22p's UTU A21p HXU
Transnote, 770's 8AU, 600, 701CS, 755CD

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “Thinkpad X60/X61 Series incl. Tablets”

Who is online

Users browsing this forum: No registered users and 30 guests