https://drive.google.com/file/d/17vtP9Z ... p=drivesdk
Unfortunately, it's stuck.
A couple of questions here
1. What is the screw size /model?
2. Any special type of screwdriver or material is made from or technique to be used to minimize the risk of the screw grooves getting worn out?
- Admin Emeritus
- Posts: 22506
- Joined: Mon Sep 18, 2006 5:17 am
- Location: Wexford, Éire
In there all screws are described!
That's a (bit morxed) Phillips screw.
Use a Phillips #0 or #1 screwdriver, maybe try to fasten it first, then loosen.
If it won't come out, try a normal flat screwdriver with a strong blade that is just a little bit less wide than the screw-groove.
If still not, tape everything around that wifi-card to make the area dust-proof, then get a Dremel with a rotary diamond 10-12mm disk and carefully make only one shallow groove in that screw for a bigger flat screwdriver.
Covid-19: Stay safe, so still Mask it or Casket!
390e FOR SALE
1 x T20
1 X T23 + 3 breaking for parts
1 X T23 with Samsung 840 SSD and XP Great combination !: SOLD
2 X T60
5 X T61
1 X T601 15"
1 X T520
2 X T530
- Similar Topics
- Last post
Who is online
Users browsing this forum: No registered users and 10 guests