T22 UltraBay driver

Message

Rex · #1 Post by **Rex** » Sat Apr 16, 2005 7:01 am

Hi there,

I have a T22 dual booting (at the moment) W98SE and W2k. Under 98, I have the UltraBay 2000 utility that gives a message when I remove the UltraBay and install a new one (such as the floppy drive).

I cannot find this utility for W2k. Does it exist? If so, what is it called? May be W2k does not need it? I don't know.

Grateful for any advice and if it is not necessary, that is just hunky dory.

Rex

MadeInJapan · #2 Post by **MadeInJapan** » Sat Apr 16, 2005 8:50 am

Are you talking about the "Easy Eject" software? If so, it should be on the IBM site where you find the drivers.

Rex · #3 Post by **Rex** » Sat Apr 16, 2005 10:48 am

David,

I guess so, but [censored] if I can see it. I'll look again under Easy Eject.

Rex

MadeInJapan · #4 Post by **MadeInJapan** » Sat Apr 16, 2005 1:10 pm

Rex,
You have to do some snooping around...it's not easily visible and no real description....try this link and find the file you need from the list:
http://www-307.ibm.com/pc/support/site. ... MIGR-41987
Seems they'v renamed it to Ultrabay Swap Utility.
Cheers,
Dave

Rex · #5 Post by **Rex** » Sat Apr 16, 2005 1:26 pm

David,

Followed your link (been there before I posted my question) and there appeared to be nothing for a T22 and W2k. On the other hand, if I look closely, the little arrows indicate that I should use the driver to the left of the arrow. Am I stupid (don't answer that) or is not not exactly clear?

And that is what I have done.

Many thanks,

Rex

MadeInJapan · #6 Post by **MadeInJapan** » Sat Apr 16, 2005 6:05 pm

Glad you figured out the little arrows...for someone who hasn't seen them before, there is no good explanation. Glad you finally got it...Did it work?

Rex · #7 Post by **Rex** » Sun Apr 17, 2005 2:17 am

Seems to work but no the same way that I get the messages in W98SE. It seems to be a utility for all removable hardware, inc. whatever is in the PCMCIA slot.

But as long as I can switch UltraBay drives with no plrblem, I don't really need it (I think.)

The 98 version gives a message when the drive is not working and that is useful.

Rex

MadeInJapan · #8 Post by **MadeInJapan** » Sun Apr 17, 2005 3:28 am

Right...they did change some things in W2K/WXP...it isn't the same.

T22 UltraBay driver

T22 UltraBay driver

Who is online