what displays are in the X60 ? Need the manufacturer P/N

[rychuu]

Hello,

I would like to buy x60 with broken LCD. Could anyone write is the good choice? I can replace the LCD without any problems.

What exactly LCD was originally putted into x60 with digiizer? I would like to check exact costs of the repair.

I really need the small computer instead my big t40p, please help )

regards

[Neil]

The part numbers are all in the Hardware Maintenance Manual

[rychuu]

The part numbers are all in the Hardware Maintenance Manual

I need the part numbers from Hydis, Samsung, etc

Additionally my x60 is 6364CTO, I cant find this model on the lcd list

regards

[Neil]

All the part numbers of the various manufacturers are listed in the manual, as I recall.

Your CTO model might have a more useful type number on the first page of the BIOS. If no, you can either read the sticker on the back side of the panel or use software to read it's data

[rychuu]

All the part numbers of the various manufacturers are listed in the manual, as I recall.

Your CTO model might have a more useful type number on the first page of the BIOS. If no, you can either read the sticker on the back side of the panel or use software to read it's data

If I'm difficult, I would like to say sorry

On the 202. page I have found only Lenovo FRUs like as:

Hydis 13N7094
Hydis 42T0435
Samsung 13N7096
CMO 42T0343

But these FRUs are not P/N like e.g. Boehydis ht12x21-230. I would like to know similar nubers of all manufacturers.


I haven't computer yet, I can order a photo of sticker [with type] - which information should be better for me ? Probably, there are only 6364-CTO TyPE number And serial ofc

[Neil]

Oh! I did not understand... I would not recommend using a panel that was not made for the X60. It might work, but I think you would be asking for trouble. Better to stick with panels with an IBM FRU like the ones listed in the manual.

Yeah, you will have to wait until you actually get the X60 to see what panel is in it. There won't be any way to tell from the numbers on the outside of the case.

[rychuu]

Oh! I did not understand... I would not recommend using a panel that was not made for the X60. It might work, but I think you would be asking for trouble. Better to stick with panels with an IBM FRU like the ones listed in the manual.

Yeah, you will have to wait until you actually get the X60 to see what panel is in it. There won't be any way to tell from the numbers on the outside of the case.

ok, thank you,

I would like to know is it possible to determine other paramters basing on the type. On the sticker with type is Product ID:6364wcq also.

I havent find this type in my tabook from 2011

where should i look for?

regards

[RealBlackStuff]

Go here: http://support.lenovo.com/en_US/product ... ookup.page
or here: http://www-947.ibm.com/support/entry/portal/parts
plug in the Type (6364) and the Serial Number (S/N) without the dash from the label and you should get a list of the ex-factory installed parts.
6364-wcq is not in Lenovo's data base, probably a European model.
These are all XGA screens as used in the X60/X60s/X61/X61s:
Samsung 13N7096 LTN121XJ-L07
CMO 42T0343 N121X5-L06
BoeHydis 42T0435/42T0434/13N7094 HT121X01-101

[rychuu]

thank you for your reply

I have forgotten about these tools, very nice