CLOSED

[ajkula66]

Please note that the prices DO NOT include shipping unless otherwise stated...

CPUs:

1) Intel SL9EH Core Duo T2500, 2.00Ghz/2MB/667 Mhz Yonah - $15

http://ark.intel.com/products/27236/Int ... 7-MHz-FSB)

2) Intel SL9JN Core Duo T2600, 2.16GHz/2MB/667 MHz Yonah - $20

http://ark.intel.com/products/27237/Int ... 7-MHz-FSB)

These CPUs works in R60, T60, Z61 series presuming a 945 chipset and not 940. Ask me if you're unsure.

I also have a *ton* of older P4M and Pentium M CPUs, let me know if you need a specific one and I'll search for it...the same applies to older wireless/Bluetooth cards...




motherboards/systemboards/planar cards - call them what you will:

1) T60p motherboard for non-widescreen 4:3 models, various FRUs, ATi FireGL V5250 256MB GPU, fully tested - 70

2) T60p motherboard for non-widescreen 4:3 models, various FRUs, ATi FireGL V5200 256MB GPU, fully tested - $60

3) T60 motherboards for non-widescreen 4:3 models, various FRUs, all with ATi X1300 64MB GPU, fully tested - $35

4) T60 motherboards for non-widescreen 4:3 models, various FRUs, Intel 950 integrated graphics, fully tested - $30


LCDs and LCD assemblies

1) A complete working 14" XGA (1024x768) T4x LCD assembly, very clean and bright screen, very clean lid, everything included. Ships with a clear plate of your choice.$25

2) 15" SXGA+ (1400x1050) IPS FlexView LCDs, LG Philips, FRUs will vary, pulled out of the working T60/p units - $30 and up

3) A complete working 15" UXGA (1600x1200) T4xp LCD assembly, everything included, one small gray spot in the middle section of otherwise very clean and bright IPS FlexView panel, - $50.



misc. items:

1) T4x/R5x series keyboards, 14" models/U.S. English only, price will reflect both the condition and the manufacturer, clean examples overall - from $10 and up



the stuff that I'm looking for, cash or trade:

- Mint or near mint palmrests/keyboard bezels for 15" (4:3) non-widescreen T60/p

- DVD RW multiburner drives for T6x series

- 2GB and 4GB PC2-5300 laptop DIMMs.

I'm more than happy to combine shipping and listen to *reasonable* offers...talk to me...

PM or email me directly to tataslonATaol.com with any questions/concerns

[agarza]

Do you have cadddy + rubber rails for a X61?

[ajkula66]

Do you have cadddy + rubber rails for a X61?

Nope, sorry.

[Easy Wind]

am I missing the RAM size on these ?

>LOT "C1": 5 sticks of PC2100 (DDR266) laptop RAM, mostly with FRU #, $25
>LOT "C2": 4 sticks of PC2700 (DDR333) laptop RAM, some with FRU #, $24

[ajkula66]

All sticks listed are 512MB DIMMs.

[BillMorrow]

Do you have cadddy + rubber rails for a X61?

the HDD caddy is available most anyplace..
shucks, look at the sponsor bar (above) at newmode's website..
they have them..

[Easy Wind]

All sticks listed are 512MB DIMMs.

thanks, overlooked that apparently!

[ajkula66]

New items added.

[deadzoo]

Any 60GB or larger IDE drives?

[ajkula66]

Any 60GB or larger IDE drives?

Not at the moment, I'm sorry to say.

[ajkula66]

New stuff added and a completely redone post to boot....

[Easy Wind]

CPUs:
4) 15" SXGA+ (1400x1050) IPS FlexView LCD, FRU 92P6671, ID Tech N150P3-L01, nice and bright but has one notable dust spec in the middle section of the screen, panel only - no cable or inverter - works in T4x/R5x and many older ThinkPads, please ask me if you're unsure about compatibility - $27

I am assuming not, and I'm sure it's covered somewhere on this site, but would this work in a T60 15" (4:3) ?

This would be for a possible future Frankey project

[ajkula66]

I am assuming not, and I'm sure it's covered somewhere on this site, but would this work in a T60 15" (4:3) ?

This would be for a possible future Frankey project

While you could possibly get it to work, it would likely never work as well as the screens originally shipped with T60/p series, but it most definitely would not work "out of the box".

If you're intent on building a Frankie with a SXGA+ IPS panel, this is as good as it gets:

http://forum.thinkpads.com/viewtopic.php?f=11&t=105469

[Easy Wind]

d'oh, actually sent you a PM, ignore that really.

But thanks for the info and reminder link of RBS post. I had seen that thread before but was hoping on spending a bit less than that if I could.

[DaKKS]

Any chance you have a 755 or 765 Pentium-M? And willing to ship to europe?
Cheers

[ajkula66]

Any chance you have a 755 or 765 Pentium-M? And willing to ship to europe?
Cheers

While I'm always happy to ship anything and everything apart from batteries abroad, I have no PM 755 or 765 CPUs to offer at the moment...

[DaKKS]

While I'm always happy to ship anything and everything apart from batteries abroad, I have no PM 755 or 765 CPUs to offer at the moment...

Bugger... Ta anyway, mate. Throw a PM my way if you do, will ya?

[Radioguy]

Do you happen to have a Pentium M 780?

[ajkula66]

Do you happen to have a Pentium M 780?

I might come up with one of these, will PM you if I do...

[tipo33]

I asked Tuus about this, and he is on the lookout for one, but in the meantime: do you have any LCD inverters for 15" T60 SXGA+ ?
FRU 42T0079, 41W1012 or 39T5658.
I have a XGA T60 and a spare SXGA+ screen, but no inverter to do the conversion

[ajkula66]

I asked Tuus about this, and he is on the lookout for one, but in the meantime: do you have any LCD inverters for 15" T60 SXGA+ ?
FRU 42T0079, 41W1012 or 39T5658.
I have a XGA T60 and a spare SXGA+ screen, but no inverter to do the conversion

Sorry, no. Could use a couple myself...

[ajkula66]

Update & bump.

[jronald]

Hi George, I owe you a fiver, and Bump!

Ron

[RealBlackStuff]

I asked Tuus about this, and he is on the lookout for one, but in the meantime: do you have any LCD inverters for 15" T60 SXGA+ ?
FRU 42T0079, 41W1012 or 39T5658.
I have a XGA T60 and a spare SXGA+ screen, but no inverter to do the conversion

You can temporarily use the XGA inverter.
Its output is just a little bit less than an SXGA+/UXGA inverter's, but at least it's a workable solution till you find the proper inverter.
Swapping out an inverter is a lot easier than the whole LCD panel.
You can also use the 13R1014/13R1015 inverter for SXGA+/UXGA (which is even harder to find) .

[Radioguy]

Do you happen to have a Pentium M 780?

I might come up with one of these, will PM you if I do...

Anything pop up yet?

[ajkula66]

Anything pop up yet?

Nope. But it still might...never give up hope, until they shove a lit cigarette in your mouth and start blindfolding you...

[ajkula66]

Manual bump.

[xirtyllo]

Hi,
Is it possible to fit those in a widescreen 14'' T61 case? (I guess not, but wanna be sure

Thank u

Code: Select all

1) T60p motherboard for non-widescreen 4:3 models, various FRUs, ATi FireGL V5200 256MB GPU, fully tested - 60

2) T60 motherboards for non-widescreen 4:3 models, various FRUs, all with ATi X1300 128MB GPU, fully tested - $35 

[ajkula66]

No.

None of the listed T60 boards would fit in a widescreen T61...

[ajkula66]

Update and bump.