Can I use an x31 lcd in my x60s?

Message

fitzgeraldo · #1 Post by **fitzgeraldo** » Fri Aug 24, 2012 9:42 am

I have an X60s with a column of dead pixels. I also have an older x31 with a perfect lcd screen. Has anyone ever swapped one for the other and if so, how did it work out. Thank you kindly.
Fitz Geraldo.

Neil · #2 Post by **Neil** » Fri Aug 24, 2012 10:00 am

Hi Geraldo...welcome to the forum.

Unless you are able to add an EDID chip to the X31 panel and flash it with data from the X60s...then no...it won't work. Even if you did try adding the chip, I'm not sure it would work, or be wise to even try.

It's not a straight up swap any way you look at it.

fitzgeraldo · #3 Post by **fitzgeraldo** » Fri Aug 24, 2012 10:07 am

Thank you kindly Neil. I suspected as much and I'm grateful for the confirmation.
Sincerely yours.
Geraldo.

#4 Post by **RealBlackStuff** » Fri Aug 24, 2012 12:56 pm

Correction: XGA screens don't have/need an EDID chip.
If the X60s LCD cable fits in the back of the X31 LCD, and the mounting holes on the side of the LCD also match, it could be a straight swap.
They both appear to be 20-pin connectors.
Find the datasheets of both LCDs with Google, using the info from the back of the LCD panel, and compare the pin layouts.
10:1 they are the same, but it's better to be safe.

ThinkRob · #5 Post by **ThinkRob** » Fri Aug 24, 2012 3:07 pm

The X31 and X6x design shared at least one LCD panel (the BOE-Hydis HT121X01-101), so my bet is that they are likely compatible.

But again, check the datasheets to be sure (unless you're feeling daring...)

Neil · #6 Post by **Neil** » Fri Aug 24, 2012 3:29 pm

Well there you go. Learn something new every day. I thought the GPU would need a way to identify the needed resolution whether XGA or greater.

My apologies for the misinformation.

fitzgeraldo · #7 Post by **fitzgeraldo** » Fri Aug 24, 2012 6:37 pm

Comrades - thank you all for your input. This new information certainly puts a new spin on my weekend. I'll be taking the panel out of the x31 in any case so I'll let you know how things progress. Thanks again, Geraldo.

#8 Post by **richk** » Tue Aug 28, 2012 2:57 pm

I will add that most BOE panels have an eeid chip containing valid configuration info.

shurane · #9 Post by **shurane** » Wed Aug 29, 2012 11:35 am

How did the progress for the LCD go? I'm curious to how interchangeable the parts are between different thinkpad models.

fitzgeraldo · #10 Post by **fitzgeraldo** » Wed Aug 29, 2012 1:25 pm

Ho there, alas - I have no information to pass on yet, work has kept me away from home for a little while and I haven't had a chance to work on the laptops. Realistically, it won't be until the weekend now but I'll be sure to post details here when I have them.

Thanks again for the advice chums.

Geraldo.

Can I use an x31 lcd in my x60s?

Can I use an x31 lcd in my x60s?

Re: Can I use an x31 lcd in my x60s?

Re: Can I use an x31 lcd in my x60s?

Re: Can I use an x31 lcd in my x60s?

Re: Can I use an x31 lcd in my x60s?

Re: Can I use an x31 lcd in my x60s?

Re: Can I use an x31 lcd in my x60s?

Re: Can I use an x31 lcd in my x60s?

Re: Can I use an x31 lcd in my x60s?

Re: Can I use an x31 lcd in my x60s?

Who is online