X201 overheating - should I replace it instead of upgrading?

X200, X201, X220 (including equivalent tablet models) and X300, X301 series specific matters only.
Post Reply
Message
Author
Passa
Posts: 15
Joined: Thu Apr 30, 2009 6:25 am
Location: Sydney, Australia

X201 overheating - should I replace it instead of upgrading?

#1 Post by Passa » Sun Sep 23, 2012 10:31 pm

I was planning today on ordering more RAM, an SSD and a new 9-cell battery for my X201. But the problem I've detailed below has made me think - is it worth putting down that money (probably about $400 AUD) on my X201, given these issues that are beginning to crop up, or should I just buy a new one? (X230 or even one of the Ivy Bridge equipped Edge models)

My X201 shuts down when I tax the CPU for a long period (video transcoding, archiving, etc). I've installed tpfancontrol and monitor it with RealTemp while trying to transcode video and I've seen what it sorta does now. It'll be locked at full speed, get to about 98 degrees (seven degrees from the shutoff point), the fan will kick into full speed at this point (seems kinda late), it'll creep up to 100 degrees, then the multiplier lowers to 9x (so my CPU runs at below half speed) and the temperature plummets to the mid 50s.

The fans slow down, eventually the clock speed goes back up, the fan remains slow until around 99 degrees, when it will again hover at around 100 degrees at full speed with full speed fan... and again the clock speed will drop, and the temperature goes to the mid 50s.

This process repeats until somehow the fan kicks in just too late, the laptop cracks 105 degrees, the screen goes dark, and 5 or so seconds later it'll turn off. I understand the X201 is known for these overheating issues - I keep the internals clean but we're heading to warmer months in Australia so the issue is getting worse. What can I do to fix it? I've made the tpfancontrol timings more aggressive but the temperature sensor in tpfc is still not as high as RealTemp, so it still eventually goes over and shuts off.

Decisions! Any help? :)
Lenovo ThinkPad X201 // i5-520M // 8GB RAM // Samsung 830 256GB SSD // 9-cell battery // Windows 8.1 Pro

QWERTY Andreas
Junior Member
Junior Member
Posts: 460
Joined: Tue Nov 03, 2009 2:40 am
Location: Copenhagen Denmark

Re: X201 overheating - should I replace it instead of upgrading?

#2 Post by QWERTY Andreas » Thu Sep 27, 2012 1:25 am

Hi
why dont you use tp fan control to set the fan at full speed while putting it under heavy load?
Thinkpad W500 (2.53 GHz P8700, 4 GB RAM, FireGL V5700, WUXGA)
Thinkpad T61F 14" (2.53 GHz QX9300, 6 GB RAM, Quadro FX570m 256 MB, SXGA). Advanced dock with AMD Radeon HD7750
Custom build ITX desktop (i5 4590, 8GB RAM, AMD R7 260X, custom watercooling)
Thinkpad 8, Fujitsu F-07C


FS: T61F

barrywohl
Junior Member
Junior Member
Posts: 445
Joined: Tue Mar 06, 2007 8:01 am
Location: Sheridan, WY
Contact:

Re: X201 overheating - should I replace it instead of upgrading?

#3 Post by barrywohl » Sat Sep 29, 2012 7:30 am

I have an X201T that always got so hot it left a red mark on my tummy after a long session of reading in bed.

I replaced it with an X230T with i7 and a 500 gb Crucial SSD drive. It runs cool and FAST. I prefer the X230T keyboard to the X201T keyboard due to the back light and due to putting the delete key upper right corner.

No regrets.

I'm running Windows 8 RC x64 on both the X201T and the X230T and I'll upgrade both to Windows 8 Professional x64 after October 26th.
First Thinkpad 755CX in 1995. First IBM: PC 1982 8088 w 64K RAM, dual floppy. Currently in use:
X230T with Win8Pro x64, i7, 500gb ssd; W700 WUXGA RAID 1 Blu-Ray W7Pro x64, occasionally a T61p with Win7Pro x64

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad X200/201/220 and X300/301 Series”

Who is online

Users browsing this forum: No registered users and 5 guests