Frankinpad build?

T60/T61 series specific matters only
Post Reply
Message
Author
arty_harvy
Freshman Member
Posts: 54
Joined: Mon Jul 18, 2011 7:59 pm
Location: Savannah, Georgia

Frankinpad build?

#1 Post by arty_harvy » Fri Oct 19, 2012 12:32 pm

Hey guys. I would like to convert the T61p in my sig to a IPS T60/T61p. Where should I start? Can I just buy a T60p IPS model and swap my T61p board into it? Is it that simple. Does anyone know of a tutoial anywhere that details this process?
X201: i5-560M, 8GB 1066Mhz, Intel 320, 300GB, Intel GMA, 1280x800
T410s: i5-540M, 8GB 1333Mhz, Intel X18-M 160GB/1TB, NVS 3100M, 1440x900
W520: i7-2960XM, 32GB 1600Mhz, Intel 520, 240GB/1TB, 2000M, 1920x1080
W700: QX-9300, 16GB 1333Mhz, Momentus XT 750GB RAID 0, FX 3700M, 1920x1200

Neil
Senior ThinkPadder
Senior ThinkPadder
Posts: 2915
Joined: Sun Aug 07, 2005 5:41 pm
Location: Paragould AR USA

Re: Frankinpad build?

#2 Post by Neil » Fri Oct 19, 2012 12:42 pm

No...your T61p board will not fit into a 4X3 T60 chassis. You will need the board from a 14.1" 4X3 T61 to build a flexview frankenpad.

Just search this forum for "frankenpad", and you'll find all the scoop.
Collection = T500 - R400 - X300 - X200 - T61 (14" WXGA+) - T61 (14.1" SXGA+) - T60 (15" SXGA+) - X40 - T43p - T43 - T42p - A30P - 600E

arty_harvy
Freshman Member
Posts: 54
Joined: Mon Jul 18, 2011 7:59 pm
Location: Savannah, Georgia

Re: Frankinpad build?

#3 Post by arty_harvy » Fri Oct 19, 2012 12:48 pm

So there is no way to have a FX 570m/IPS? I could have sworn I saw one in a forum once.
X201: i5-560M, 8GB 1066Mhz, Intel 320, 300GB, Intel GMA, 1280x800
T410s: i5-540M, 8GB 1333Mhz, Intel X18-M 160GB/1TB, NVS 3100M, 1440x900
W520: i7-2960XM, 32GB 1600Mhz, Intel 520, 240GB/1TB, 2000M, 1920x1080
W700: QX-9300, 16GB 1333Mhz, Momentus XT 750GB RAID 0, FX 3700M, 1920x1200

Neil
Senior ThinkPadder
Senior ThinkPadder
Posts: 2915
Joined: Sun Aug 07, 2005 5:41 pm
Location: Paragould AR USA

Re: Frankinpad build?

#4 Post by Neil » Fri Oct 19, 2012 12:55 pm

I'm not 100% certain, but I think the 14.1" (4x3) were only built with nVidia NVS140m or Intel graphics. Most Frankenpad builders prefer the Intel boards anyway, so as to avoid the defective design in the NVS140m and 570m chips, that causes the layers of the chip to seperate.

Here's one of the threads: http://forum.thinkpads.com/viewtopic.php?f=29&t=101626
Collection = T500 - R400 - X300 - X200 - T61 (14" WXGA+) - T61 (14.1" SXGA+) - T60 (15" SXGA+) - X40 - T43p - T43 - T42p - A30P - 600E

ajkula66
SuperUserGeorge
SuperUserGeorge
Posts: 15740
Joined: Sun Feb 25, 2007 11:28 am
Location: Brodheadsville, Pennsylvania

Re: Frankinpad build?

#5 Post by ajkula66 » Fri Oct 19, 2012 2:55 pm

A 14" (4:3) T61p board would have the 570 GPU but with only half of VRAM (128MB) when compared to a widescreen T61p planar...so any gain over the standard NVS140M would be rather minimal...
...Knowledge is a deadly friend when no one sets the rules...(King Crimson)

Cheers,

George (your grouchy retired FlexView farmer)

AARP club members:A31p, T43pSF

Abused daily: T61p

PMs requesting personal tech support will be ignored.

TuuS
ThinkPadder
ThinkPadder
Posts: 1980
Joined: Thu Sep 22, 2011 2:41 pm
Location: Hockessin, Delaware

Re: Frankinpad build?

#6 Post by TuuS » Sat Oct 20, 2012 8:39 am

I have an FX570m frankenpad, they will out perform the NVS140m, but much of the difference can be made up if you (carefully) overclock your nvs chip. The nvs chip is purposefully underclocked to produce a reliable business class workhorse, but if you do force it to run faster you need to carefully watch the heat and be prepared to "pay the piper" if you end up frying it.

By the way, my FX570m frankenpad also has the X9000 CPU, very nice combination with an SSD, 8gb ram and a NOS UXGA screen, however I paid an obscene amount of money for my system board, so you'd probably want to go with an NVS board, just be careful, websites are flooded with reflowed/baked boards that ALL fail, usually within weeks, but if you can find one that has never failed and been well cared for, then there is a very good chance it will last for years. Many do prefer the intel graphics option, and I have one of them too, but with all the high end parts going into the build, I just couldn't see building it with integrated graphics. If it was a casual daily driver, then intel would be the best option, but not if you want to build a super laptop and not with an X9000 (in my opinion).

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad T6x Series”

Who is online

Users browsing this forum: No registered users and 4 guests