Gauging Interest in my old inventory

Message

baisley · #1 Post by **baisley** » Sat Oct 20, 2012 4:54 pm

Hello Everyone,

I use to participate and sell on the forum a few years ago. Right at the peak of doing this side business, I went thru several life events all at one (Surgeries - loss of job - few other things) I basically closed up my spare room which was my "shop". I am finally going back in and cleaning out my stuff.

I have a TON of T4X stuff. I have purged stuff I felt had no value like plastics but, I have a bunch of the following items for T41 T42 T43:

New factory boards, to include P series items
Repaired Boards - (BGA Repaired)
CDRW & DVD Drives
Power Supplies
Keyboards in all grades (US ONLY) To Include the Thailand Manufactured ones that folks like

I also have around 80 plus LCD's for T4X and T6X boxes.

I am trying to gauge interest / value in the items. I would like to see the stuff go to people who are into the Thinkpads. I really enjoyed working with these units as well as working with the folks I did back in the day on this forum. There is no sense in me holding onto this stuff. I plan on keeping a hand full of stuff / laptops for my collection and purge the rest.

I might also part with my Metcal QX2 Rework Station. This is what I was using to reflow the BGA's back in the day. This unit is still used in SMT rework. It has very little use on it.

If I can ask for folks input on what value I could pull from some of this stuff.

Thanks for your time in advance,

Kevin

ajkula66 · #2 Post by **ajkula66** » Sat Oct 20, 2012 5:28 pm

You've got a lot of interesting stuff there.

Personally, if you could PM me the list of the screens that you have available (15" only) I'd be very grateful.

Brand new boards will also find a buyer, sooner or later. I might be in the market for a couple of T43p ones myself.

If you make up a list, come with some type of pricing, you're likely find buyers.

No idea on the rework unit, though, someone else will have to chime in on that one...

Neil · #3 Post by **Neil** » Sat Oct 20, 2012 6:04 pm

I might be interested in some screens (either 14" or 15"), boards, etc. Just depends on what kind of deal I can get, as I don't really need any of the stuff either. It's just that I've accumulated a few units over the years that are missing one thing or another.

Doubt that I would have any interest in the re-work station, though, not really interested in getting into that kind of thing.

Radioguy · #4 Post by **Radioguy** » Sat Oct 20, 2012 6:51 pm

I'm probably priced out of the competition, but I have a general interest in 15.4" T61-compatible parts and accessories if you're trying to shift stuff.

DaKKS · #5 Post by **DaKKS** » Sun Oct 21, 2012 6:52 am

If the shipping isn't entirely obnoxious I'd be interested in two or more T4x boards with the 9600 gfx. Its definite for me (15" T42) and I'm 90% sure my sis (15" T42) wants one. Gonna check with my mates. We're all running T4x's of various sizes and models but we all have 7500 gfx. Might need a few bricks too.

EDIT: Also, I'd kill for a 2.1ghz P-M...

innova · #6 Post by **innova** » Sun Oct 21, 2012 7:33 am

I would be interested in new boards,T43p and keyboards. Thanks

goofyGAguy · #7 Post by **goofyGAguy** » Sun Oct 21, 2012 8:16 am

I could possibly be interested in a 15" IDTech-sourced SXGA+ or UXGA LCD.

Mofo Jones · #8 Post by **Mofo Jones** » Sun Oct 21, 2012 10:47 am

Depending on the results of swapping LCDs between a couple of T42s, I might be in the market for a mobo.

flipteo · #9 Post by **flipteo** » Mon Oct 22, 2012 11:47 am

I might be interested in complete lcd/assemblies that would fit a 14'' t42.

deadzoo · #10 Post by **deadzoo** » Tue Oct 23, 2012 1:11 pm

What`s the model number of your OK International QX2 Metcal ? eg: S-11, SBH-11

emtee3511 · #11 Post by **emtee3511** » Tue Oct 23, 2012 1:42 pm

Hello baisley -- Lots of Forum interest here -- are you going to post availability and pricing?

baisley · #12 Post by **baisley** » Fri Oct 26, 2012 6:42 pm

Sorry guys.. I was a flake and didn't state that I would be traveling and would log back in when I got home. Let me do this, let me compile a list of my cr*p. trying to find my bar code reader so I can do it quickly. I should have some posted within the next few days. Thanks for the follow up everyone and again.. sorry for the slow response, I am just really busy with job and fmaily, will poist soon.

Thanks

baisley · #13 Post by **baisley** » Mon Oct 29, 2012 7:18 pm

Here is the brief inventory I have at the moment:

Planars:
FRU Condition Qty
91P7992 USED 1
42T0273 NEW 4
42T0067 NEW 1
42T0073 NEW 2
39T5463 NEW 3
42T0071 NEW 1
93P3301 USED 1
91P7716 USED 1
91P9176 USED 1
39T5448 USED 1
91P7998 USED 1
39T5400 USED 1
91P7988 NEW 1
42T0033 NEW 1

LCD's
** I Have NOT tested these LCD's yet - I cannot vouch if they work, have bruises or lines. I need to perform these tests over the next few weeks ***
MODEL FRU QTY
LTN141XA - L01 92P6759 8
LTN141XA - L01 13N7051 1
LTN141XA - L01 11P8352 3
MX150XN07 1
LP141X14 92P6726 3
LP150X09 92P6679 1
LTN141X8-L02 DP/N 6
LTN141P4-L02 11P8348 4
LT154W02 42T0423 1
HT14X1B-201 13N7044 1
LTN141WD-L05 42T0412 2
LP141WP1 13N7106 1
LTN154P2-L05 42T0329 2
LP154W02 42T0423 1
LTN154WX4 42T0421 1
LTN154WU1 13N7198 1
LP140WX1 13N7012 1
B141EW04 V0.7 42T0339 1
LP141WP2 42T0498 1
LP141WX1 13N7100 1
HV150UX1-100 13N7076 2
LQ10D421 2
HT12X21-351 13N7175 1
HT14X19-110 92P6745 1
N121X5-L02 13N7096 1
11P8350 1
LTN140W1-L02 13N7010 1
LP140WX1 13N7102 1
TX36D37VC1CAA 11P8297 1
HT14X19-110 92P6745 1
NX141XB-L01 1
LTN141P4-L02
LP154W01 42T0421 1
LTN121XJ-L07 13N7096 2
HT14X1B-201 92P6733 1
LTD141EN9B 42T0438 1
HT14P12-101
LTN141XA - L01 42T0363 1
92P6731 1
13N7024 1

T4* CDRW Drives - 55 pieces - tested and individually boxed.

Keyboards - I have 45 plus units missing some keys. I need to pull these and replace the keys and test. I have some complete units in my inlaws garage. I should be going over there in the next few weeks.

baisley · #14 Post by **baisley** » Mon Oct 29, 2012 7:21 pm

deadzoo wrote:What`s the model number of your OK International QX2 Metcal ? eg: S-11, SBH-11

Model QX2-P-11 S/N QX1003**

It's the Older one before OKI bought out Metcal

ParatoOptimal · #15 Post by **ParatoOptimal** » Mon Oct 29, 2012 8:09 pm

I have an X31 with a line down the screen 1/3 of the way in from the right.
If a new screen would fix that, I could use one. Maybe I need the inverter or something other than the screen. I don't know.

I'm missing one of the touchpad keys on my T41. It came off when I was replacing the palmrest.
I didn't see a clasp or rod. I think I broke a plastic piece that a rod is supposed to go under. Maybe I need the whole keyboard to make it right?

goofyGAguy · #16 Post by **goofyGAguy** » Mon Oct 29, 2012 9:44 pm

Please test those HV150UX1-100's soon.

bf1152 · #17 Post by **bf1152** » Sat Nov 10, 2012 3:25 pm

I,m interested in this LTD141EN9B 42T0438 after its tested pm or email me please.

wackyD · #18 Post by **wackyD** » Sat Nov 10, 2012 4:46 pm

Hello,

I could use an XGA or SXGA+ screen for a T60 - I've looked through your list, but I am not too great on actual screen part numbers.

Let me know if you have something,

Thanks!

baisley · #19 Post by **baisley** » Sun Nov 11, 2012 7:13 pm

Everyone...

Please send me an email direct, as I have been swamped as usual.This will aloow be to get back in touch with you quicker.

Thanks for your patience and understanding..

Kevin

kevin@baisley.net

Gauging Interest in my old inventory

Gauging Interest in my old inventory

Re: Gauging Interest in my old inventory

Re: Gauging Interest in my old inventory

Re: Gauging Interest in my old inventory

Re: Gauging Interest in my old inventory

Re: Gauging Interest in my old inventory

Re: Gauging Interest in my old inventory

Re: Gauging Interest in my old inventory

Re: Gauging Interest in my old inventory

Re: Gauging Interest in my old inventory

Re: Gauging Interest in my old inventory

Re: Gauging Interest in my old inventory

Re: Gauging Interest in my old inventory

Re: Gauging Interest in my old inventory

Re: Gauging Interest in my old inventory

Re: Gauging Interest in my old inventory

Re: Gauging Interest in my old inventory

Re: Gauging Interest in my old inventory

Re: Gauging Interest in my old inventory

Who is online