T61p board numbers
T61p board numbers
So I have found a board with s/n stating it was made with the good nvidia gpu (october 08). So I got really excited thinking this is going to be my backup plan. Then I look at the picture of the gpu chip and see that it has "0742a2" on it. How can this be? Does the date on the chip mean more than the s/n on the actual machine or vis versa?
T61p-6458 | Core2Duo T9300 | Nvidia Quadro FX 570m | 4GB Ram| 60GB OCZ-Solid3 SDD(main) | 250GB Seagate Momentus 5400(ultrabay) | Intel Wireless 4965AGN | Sanyo 9 cell Bat | Middleton 2.29 Bios | Windows 7 Ultimate 64 Bit
-
tipo33
- Freshman Member
- Posts: 54
- Joined: Tue Sep 18, 2012 4:25 am
- Location: St. Petersburg, Russia and Yellow Springs, Ohio
Re: T61p board numbers
Where did you get the board? Did you pull it from a machine from a reputable source?
W520 T601 A31p
-
ajkula66
- SuperUserGeorge

- Posts: 15740
- Joined: Sun Feb 25, 2007 11:28 am
- Location: Brodheadsville, Pennsylvania
Re: T61p board numbers
Welcome to the forum!
What's the production date shown on the sticker at the bottom of the laptop? It's the same sticker that holds the 7-character model number and the serial #, and is in yy/mm format, 07/12 = December of 2007 etc...
What's the production date shown on the sticker at the bottom of the laptop? It's the same sticker that holds the 7-character model number and the serial #, and is in yy/mm format, 07/12 = December of 2007 etc...
...Knowledge is a deadly friend when no one sets the rules...(King Crimson)
Cheers,
George (your grouchy retired FlexView farmer)
AARP club members:A31p, T43pSF
Abused daily: T61p
PMs requesting personal tech support will be ignored.
Cheers,
George (your grouchy retired FlexView farmer)
AARP club members:A31p, T43pSF
Abused daily: T61p
PMs requesting personal tech support will be ignored.
Re: T61p board numbers
I have not bought it yet and I can't say if its reputable or not but I have seen pictures and at the price I'm not going to loose sleep if I make a mistake.
With that in mind the s/n on the bottom of the machine is "LK-NFBKM 08/10" so that would be October 2008 and in good shape. The problem is that the nvidia chip itself says "0742a2" which is the 42nd week of 07 right? So I am assuming that the chip is still a bad chip or am I mistaken somewhere?
With that in mind the s/n on the bottom of the machine is "LK-NFBKM 08/10" so that would be October 2008 and in good shape. The problem is that the nvidia chip itself says "0742a2" which is the 42nd week of 07 right? So I am assuming that the chip is still a bad chip or am I mistaken somewhere?
T61p-6458 | Core2Duo T9300 | Nvidia Quadro FX 570m | 4GB Ram| 60GB OCZ-Solid3 SDD(main) | 250GB Seagate Momentus 5400(ultrabay) | Intel Wireless 4965AGN | Sanyo 9 cell Bat | Middleton 2.29 Bios | Windows 7 Ultimate 64 Bit
-
ajkula66
- SuperUserGeorge

- Posts: 15740
- Joined: Sun Feb 25, 2007 11:28 am
- Location: Brodheadsville, Pennsylvania
Re: T61p board numbers
Then feel free to proceed with the purchase...cblair426 wrote:I have not bought it yet and I can't say if its reputable or not but I have seen pictures and at the price I'm not going to loose sleep if I make a mistake.
I'd trust the base - presuming I knew who I was buying the machine from in the first place - more than engraving on the chip itself, and here's why: no one - and I mean NO ONE - will tell you when nVidia started rolling out the "updated" version of these chips. I've read a lot of hogwash on the web regarding this particular issue, but there really isn't any information that can be reliably traced to the source...as in nVidia, that is...With that in mind the s/n on the bottom of the machine is "LK-NFBKM 08/10" so that would be October 2008 and in good shape. The problem is that the nvidia chip itself says "0742a2" which is the 42nd week of 07 right? So I am assuming that the chip is still a bad chip or am I mistaken somewhere?
...Knowledge is a deadly friend when no one sets the rules...(King Crimson)
Cheers,
George (your grouchy retired FlexView farmer)
AARP club members:A31p, T43pSF
Abused daily: T61p
PMs requesting personal tech support will be ignored.
Cheers,
George (your grouchy retired FlexView farmer)
AARP club members:A31p, T43pSF
Abused daily: T61p
PMs requesting personal tech support will be ignored.
Re: T61p board numbers
Yea I get what your saying. I bought my current T61p used without any knowledge of this problem about 8 months ago and I'm a little concerned that one day she might decide to start beeping at me. I have done the usual application of arctic #5 and everything idles in the mid to lower 40C. I would just be devistated if I went to work one day and it it decided it was done. So far there have been no signs but from everything I have read there aren't any so that would be one of the worst days of my life. I think I might open her back up and see if the previous owner had it worked on by looking at the numbers on the gpu and re-apply some paste while I'm at it.
They are great machines, but I'm afraid I have fallen in love with a time bomb with no visible countdown to watch.
Thanks for the replies, I will have to give all this some thought before I drop any more money into an aging machine.
They are great machines, but I'm afraid I have fallen in love with a time bomb with no visible countdown to watch.
Thanks for the replies, I will have to give all this some thought before I drop any more money into an aging machine.
T61p-6458 | Core2Duo T9300 | Nvidia Quadro FX 570m | 4GB Ram| 60GB OCZ-Solid3 SDD(main) | 250GB Seagate Momentus 5400(ultrabay) | Intel Wireless 4965AGN | Sanyo 9 cell Bat | Middleton 2.29 Bios | Windows 7 Ultimate 64 Bit
Re: T61p board numbers
I just completely ignore the Nvidia boards and use Intel instead. (Dead Nvidia T61Ps do make nice WUXGA screen donors.)
I prefer to buy bases instead of loose boards since everyone who pulls loose boards wants more money and there's no point in pulling a good board out of a good base. Bases often come with CPU, cooler and other useful parts installed saving assembly time. For well under a hundred bucks you'll be good to go. The last one I bought was forty shipped.
Just grab an Intel board and be happy for years.
I prefer to buy bases instead of loose boards since everyone who pulls loose boards wants more money and there's no point in pulling a good board out of a good base. Bases often come with CPU, cooler and other useful parts installed saving assembly time. For well under a hundred bucks you'll be good to go. The last one I bought was forty shipped.
Just grab an Intel board and be happy for years.
Re: T61p board numbers
I like the idea of a powerful display in my laptop (unless of course there is the certainty it will fail). I am now wondering if my board was replaced by the previous owner considering the punishment I have put this machine through in my day to day work, school, and obsession with constant improvement in the system itself (i.e. lots of power cycles). Kind of makes me wonder why the gpu hasn't given out yet.
While an Intel board is a good alternative, I bought this machine because I wanted something that would suite my needs all around which includes a little gaming and minor graphic design. I think at this point I am going to run my t61p till the wheels fall off
and then see if I can find a w500 which is pretty close to what I am running now.
While an Intel board is a good alternative, I bought this machine because I wanted something that would suite my needs all around which includes a little gaming and minor graphic design. I think at this point I am going to run my t61p till the wheels fall off
T61p-6458 | Core2Duo T9300 | Nvidia Quadro FX 570m | 4GB Ram| 60GB OCZ-Solid3 SDD(main) | 250GB Seagate Momentus 5400(ultrabay) | Intel Wireless 4965AGN | Sanyo 9 cell Bat | Middleton 2.29 Bios | Windows 7 Ultimate 64 Bit
-
ajkula66
- SuperUserGeorge

- Posts: 15740
- Joined: Sun Feb 25, 2007 11:28 am
- Location: Brodheadsville, Pennsylvania
Re: T61p board numbers
@cblair426:
On another note...is that a typo in your signature, or you've actually gone through the trouble of pinmodding a T9600 to get it to run in a T61p?
On another note...is that a typo in your signature, or you've actually gone through the trouble of pinmodding a T9600 to get it to run in a T61p?
...Knowledge is a deadly friend when no one sets the rules...(King Crimson)
Cheers,
George (your grouchy retired FlexView farmer)
AARP club members:A31p, T43pSF
Abused daily: T61p
PMs requesting personal tech support will be ignored.
Cheers,
George (your grouchy retired FlexView farmer)
AARP club members:A31p, T43pSF
Abused daily: T61p
PMs requesting personal tech support will be ignored.
Re: T61p board numbers
indeed it is....the t9300 is what I have. Thank you for pointing that out. Fingers got away from my brain while I was typing.
T61p-6458 | Core2Duo T9300 | Nvidia Quadro FX 570m | 4GB Ram| 60GB OCZ-Solid3 SDD(main) | 250GB Seagate Momentus 5400(ultrabay) | Intel Wireless 4965AGN | Sanyo 9 cell Bat | Middleton 2.29 Bios | Windows 7 Ultimate 64 Bit
Re: T61p board numbers
There we go, that's a little more accurate. Can you even pin mod the t9600 since it is the 1066mhz fsb?
T61p-6458 | Core2Duo T9300 | Nvidia Quadro FX 570m | 4GB Ram| 60GB OCZ-Solid3 SDD(main) | 250GB Seagate Momentus 5400(ultrabay) | Intel Wireless 4965AGN | Sanyo 9 cell Bat | Middleton 2.29 Bios | Windows 7 Ultimate 64 Bit
-
ajkula66
- SuperUserGeorge

- Posts: 15740
- Joined: Sun Feb 25, 2007 11:28 am
- Location: Brodheadsville, Pennsylvania
Re: T61p board numbers
Yep, there's a thread on NBR on getting the X9100 to work on 965 chipset...cblair426 wrote: Can you even pin mod the t9600 since it is the 1066mhz fsb?
I've got no time for that, hence I just threw a X9000 in mine...
...Knowledge is a deadly friend when no one sets the rules...(King Crimson)
Cheers,
George (your grouchy retired FlexView farmer)
AARP club members:A31p, T43pSF
Abused daily: T61p
PMs requesting personal tech support will be ignored.
Cheers,
George (your grouchy retired FlexView farmer)
AARP club members:A31p, T43pSF
Abused daily: T61p
PMs requesting personal tech support will be ignored.
Re: T61p board numbers
I didn't read this entire thread, but wanted to point out that a unit with 08/10 date code shouldn't have a gpu from 2007, so it looks like the board was replaced. This could have been done by lenovo warranty, a previous owner, or it could be someone trying to scam someone. The dates on the chip do vary and if it's the original board from october 2008, then it should be good, but I'll also add that I have yet to see a T61p from october 2008. I've seen a few from september, and I'm typing on a T61 from october. The series was cancelled after august so few were made since then.
Another telltale sign is if you look on the upper ram socket and see if there is a sticker attached with some tape. A lenovo refurbished board has an extra mac address sticker attached there, it's intended to be affixed to the bottom of the laptop to comply with laws, but the repair techs rarely bother with it. It's a sure sign the board has been replaced if you see that sticker.
ps. out of all the 08/08 or newer boards I've seen (over 100), they generally range from 0820 to 0829 on the chips, but these dates alone are no assurance the chip is good as it's believed that the old and new design were manufactured concurrently. I've also never seen any reports of an 08/08 or newer system with confirmed original board ever dying of gpu failure. I'm not saying it can't happen, all electronics can fail, but the evidence is pretty clear that nVidia did effectively solve this problem, even if they did a horrible job of handling the aftermath from the bad ones.
Another telltale sign is if you look on the upper ram socket and see if there is a sticker attached with some tape. A lenovo refurbished board has an extra mac address sticker attached there, it's intended to be affixed to the bottom of the laptop to comply with laws, but the repair techs rarely bother with it. It's a sure sign the board has been replaced if you see that sticker.
ps. out of all the 08/08 or newer boards I've seen (over 100), they generally range from 0820 to 0829 on the chips, but these dates alone are no assurance the chip is good as it's believed that the old and new design were manufactured concurrently. I've also never seen any reports of an 08/08 or newer system with confirmed original board ever dying of gpu failure. I'm not saying it can't happen, all electronics can fail, but the evidence is pretty clear that nVidia did effectively solve this problem, even if they did a horrible job of handling the aftermath from the bad ones.
-
- Similar Topics
- Replies
- Views
- Last post
-
-
How to look up specs for newer style machine type numbers?
by serpico » Fri Apr 07, 2017 10:27 am » in ThinkPad T430/T530 and later Series - 2 Replies
- 341 Views
-
Last post by serpico
Sun Apr 09, 2017 9:10 pm
-
-
-
P70 - need (34mm) ExpressCard reader (board) 'Device description' & 'Hardware ID' in Win 10 Pro 64-bit OS
by Frankenstien » Thu Feb 02, 2017 9:35 pm » in Windows 10 - 0 Replies
- 605 Views
-
Last post by Frankenstien
Thu Feb 02, 2017 9:35 pm
-
-
-
February Special, NOS Frankenpad board with X9000 Core2Extreme
by TuuS » Sun Feb 05, 2017 1:07 am » in Marketplace - Forum Members only - 0 Replies
- 436 Views
-
Last post by TuuS
Sun Feb 05, 2017 1:07 am
-
-
-
X230 board compatible with X220?
by axur-delmeria » Sun Feb 12, 2017 10:13 pm » in ThinkPad X200/201/220 and X300/301 Series - 5 Replies
- 1003 Views
-
Last post by axur-delmeria
Wed Feb 15, 2017 10:31 am
-
Who is online
Users browsing this forum: No registered users and 2 guests




