LCD problem

Message

karagunis · #1 Post by **karagunis** » Mon May 13, 2013 7:54 am

I have problem on my thinkpad z61m, 40% of lcd bottom screeen is covered with vertical lines.
Is it problem in flat cable or lcd panel?
Here is picture:
http://i44.tinypic.com/35daqsw.jpg

#2 Post by **RealBlackStuff** » Mon May 13, 2013 9:15 am

That problem is in the LCD panel.

karagunis · #3 Post by **karagunis** » Mon May 13, 2013 10:34 am

RealBlackStuff wrote:That problem is in the LCD panel.

One more thing, pressing the display bezel was helping me to solve this problem many
times before but recently I can't fix it that way anymore.
So are you 100% sure it's problem with panel?

#4 Post by **RealBlackStuff** » Mon May 13, 2013 12:10 pm

Yes, and you just proved it yourself also:

karagunis wrote:pressing the display bezel was helping me to solve this problem many
times before but recently I can't fix it that way anymore.

glossywhite · #5 Post by **glossywhite** » Mon May 13, 2013 1:12 pm

Solution: Buy a new LCD, then move on.

Problem solved

karagunis · #6 Post by **karagunis** » Mon May 13, 2013 6:21 pm

Thanks for your quick answers.
So what is my next step, do I need to replace lcd with the same fru like mine, or is it possible to use
some other compatible fru?

ajkula66 · #7 Post by **ajkula66** » Mon May 13, 2013 7:03 pm

You should stick with a Lenovo-issued LCD, IMO.

The only question is whether you want to stick with WSXGA+ that you currently have or move up to WUXGA...

Good luck.

karagunis · #8 Post by **karagunis** » Tue May 14, 2013 4:12 am

I would choose cheaper option, but I don't know where can I find compatible fru's for my laptop?
FRU on my lcd panel is 13N7020.

karagunis · #9 Post by **karagunis** » Thu May 16, 2013 12:45 pm

I have opportunity to buy second hand z60m 2529FKG with working lcd and WSXGA+ resolution. But I don't have
information about fru number to check compatibility... I just need a confirmation will it work with my z61m?

ajkula66 · #10 Post by **ajkula66** » Thu May 16, 2013 1:25 pm

Any WSXGA+ panel from *60/*61/*500 series will work, no issues.

karagunis · #11 Post by **karagunis** » Thu May 16, 2013 2:37 pm

ajkula66 wrote:Any WSXGA+ panel from *60/*61/*500 series will work, no issues.

ok, thanks ajkula.

LCD problem

LCD problem

Re: LCD problem

Re: LCD problem

Re: LCD problem

Re: LCD problem

Re: LCD problem

Re: LCD problem

Re: LCD problem

Re: LCD problem

Re: LCD problem

Re: LCD problem

Who is online