BIOS mod for T43

Message

gehageh · #1 Post by **gehageh** » Thu Apr 10, 2014 9:58 am

Hi,
I have not found any but I ask if you know any mod BIOS for T43 similar to the Middleton for T61, etc. I would like especially the SLIC support.
thanks in advance

#2 Post by **RealBlackStuff** » Thu Apr 10, 2014 10:04 am

If you have ATI graphics: http://rghost.net/44376439
if you have Intel graphics, look for: T43_R52-INTEL-70ET69WW_SLIC2.1_no_1802_no_2010.iso

gehageh · #3 Post by **gehageh** » Fri Apr 11, 2014 9:29 am

RBS thank you very much. The BIOS update worked the first time I tried it!

Emilio · #4 Post by **Emilio** » Sun Apr 13, 2014 4:43 am

Hi all,
I have a Ibm T43 2668CTO and Ibm T43 266844G: this Bios for 2010 problem is good for my 2 units? I ask this because one time to install a Bios for 2010 problem, the Bios was not good, and the pc dead. Please let me know.
Thanks and regards.

#5 Post by **RealBlackStuff** » Sun Apr 13, 2014 6:39 am

Both your machines had ATI graphics ex factory, so the above mentioned ATI BIOS will work on both.
(unless somebody swapped in a motherboard with Intel graphics)

Emilio · #6 Post by **Emilio** » Sun Apr 13, 2014 6:52 am

Hi RealBlackStuff
Like can I confirm that I have Ati graphics? Please letme know
Thanks and regards.

ajkula66 · #7 Post by **ajkula66** » Sun Apr 13, 2014 6:56 am

Any T43/p with a model number starting in 26** has ATi GPU, Intel units start wti 187*.

Emilio · #8 Post by **Emilio** » Sun Apr 13, 2014 11:32 am

hi guy,
I have done the update and all ok: But on Ibm T43 266844G during the update there was an erroe, but after restart no error 2010: what was the problem?
Thanks and regards.

ajkula66 · #9 Post by **ajkula66** » Sun Apr 13, 2014 12:05 pm

Emilio wrote:hi guy,
I have done the update and all ok: But on Ibm T43 266844G during the update there was an erroe, but after restart no error 2010: what was the problem?
Thanks and regards.

No clue on why you got the error...but if the machine works as it should, who cares?

geka3250 · #10 Post by **geka3250** » Sun Apr 13, 2014 4:45 pm

Emilio wrote:hi guy,
But on Ibm T43 266844G during the update there was an erroe

I also had error after flashing BIOS mod on 2669CTO, but everything good. Maybe because of old EC firmware(1.02), flashed 1.06 after BIOS update

Emilio · #11 Post by **Emilio** » Mon Apr 14, 2014 7:45 am

ajkula66 wrote:
Emilio wrote:hi guy,
I have done the update and all ok: But on Ibm T43 266844G during the update there was an erroe, but after restart no error 2010: what was the problem?
Thanks and regards.
No clue on why you got the error...but if the machine works as it should, who cares?

I dont wrtite the error: but the most important thing is that the pc works.

Emilio · #12 Post by **Emilio** » Mon Apr 14, 2014 7:46 am

geka3250 wrote:
Emilio wrote:hi guy,
But on Ibm T43 266844G during the update there was an erroe
I also had error after flashing BIOS mod on 2669CTO, but everything good. Maybe because of old EC firmware(1.02), flashed 1.06 after BIOS update

I have had already the Ec 1.6: howewer the important thing is that the pc works

BIOS mod for T43

BIOS mod for T43

Re: BIOS mod for T43

Re: BIOS mod for T43

Re: BIOS mod for T43

Re: BIOS mod for T43

Re: BIOS mod for T43

Re: BIOS mod for T43

Re: BIOS mod for T43

Re: BIOS mod for T43

Re: BIOS mod for T43

Re: BIOS mod for T43

Re: BIOS mod for T43

Who is online