X300/X301 LCD datasheet

[RealBlackStuff]

Finally found an elusive datasheet for the X300/X301 LCD (TMD Toshiba LTD133EQ1B)
http://www.gongchang.com/13_3_39_39_40p ... d-46d-pdf/
It's limited, but better than nothing.
There's a thread somewhere else, but can't find it at the moment...

[Qing Dao]

Where did you find it? In the future you can try searching for datasheets on baidu.com. Chinese websites have them more available without trying to force you to pay.

Edit: That is NOT a datasheet. It doesn't even give any useful information. You can look on panelook.com for some info on different panels. It doesn't tell you everything, such as pinouts, but it is usually good enough.

[RealBlackStuff]

I don't read Chinese, but in the Google searches there is English text amongst the Chinese characters.
Enough for me to find that sheet.
If it is indeed on Baidu, can you please post the link here?

[Qing Dao]

I don't read Chinese, but in the Google searches there is English text amongst the Chinese characters.
Enough for me to find that sheet.
If it is indeed on Baidu, can you please post the link here?

I've been searching, but all I can find is that pdf you linked to or other ones like it. Sorry I couldn't be more help. This panel seems pretty rare and is possibly just X300/X301 specific? Anyway, between the info on panelook.com and the display pinout on the X300/X301 datasheets, I think that might be as far as we can expect to get. Although beyond that there isn't much useful information anyway.

Panelook.com seems to have the datasheet, but someone would have to make an account with them to download it: http://www.panelook.com/LTD133EQ1B_TOSH ... 11091.html You need to be a representative from a related company though.

[RealBlackStuff]

I agree that on further inspection there is not much info in that download, EXCEPT a list of comparable screens.
I'll try to get some more info...

Found the other thread about swapping X300 screens: http://forum.thinkpads.com/viewtopic.php?f=43&t=93225

[Qing Dao]

I've researched the possibility of putting a 13.3" Macbook Pro Retina display into an X301. I don't know how well the display would fit into the lid, but the X301 should theoretically be able to run the display after some wiring mods.

[600X]

I have successfully swapped my X301 screen for a Hydis AFFS screen. (1280x800) However, it involves a lot of work. The X300 panel is unique and was a special request by Lenovo towards Toshiba. That is why no data sheet for that panel exists in public. If you need the pin layout however, I can provide it if necessary.

[RealBlackStuff]

That pinout would be a great help and basically all we need.
Please supply it!

[600X]

Here you go:

Code: Select all

LVDS Cable Pin Number Motherboard Pin Number.
**********************************************************************
LVDS PINS ( Low Voltage Differential Signal Pins)
**********************************************************************

PIN 39 : TXCLK_UN 2
PIN 38 : TXCLK_UP 3
PIN 37 : TXOUT_U2N 4
PIN 36 : TXOUT_U2P 5
PIN 35 : TXOUT_U1N 6
PIN 34 : TXOUT_U1P 7
PIN 33 : TXOUT_U0N 8
PIN 32 : TXOUT_U0P 9
PIN 31 : TXCLK_LN 10
PIN 30 : TXCLK_LP 11
PIN 29 : TXOUT_L2N 12
PIN 28 : TXOUT_L2P 13
PIN 27 : TXOUT_L1N 14
PIN 26 : TXOUT_L1P 15
PIN 25 : TXOUT_L0N 16
PIN 24 : TXOUT_LOP 17

**********************************************************************
BACKLIGHT CONTROL PINS
**********************************************************************

PIN 17 : PANEL_BACKLIGHT_CONTROL 26
PIN 16 : PANEL_BACKLIGHT_ON 27

**********************************************************************
Power Supply Pins
**********************************************************************

PIN 1  : VCC_3V 38
PIN 3  : VCC_3V 37
PIN 18 : VCC_EDID 36

**********************************************************************
EDID - I2C INTERFACE
**********************************************************************

PIN 19 : SPWG_EDID_CLK
PIN 20 : SPWG_EDID_DATA

**********************************************************************
LEDBACKLIGHT POWER SUPPLY AND GROUND PINS
**********************************************************************

PIN 8  : VOLTAGE Backlight 20V 33
PIN 9  : VOLTAGE Backlight 20V 32
PIN 11 : VOLTAGE Backlight 20V 31
PIN 12 : VBL_RETRUN_PASS( Ground) 30
PIN 13 : VBL_RETRUN_PASS (Ground) 29
PIN 15 : VBL_RETRUN_PASS (Ground) 28

**********************************************************************
Analog and Digital Ground Pins
**********************************************************************

PIN 5  : GROUND 40
PIN 7  : GROUND 39
PIN 23 : GROUND 18
PIN 40 : GROUND 1

Admin edit: Removed unnecessary whitespace