Uunderboi's T60

T60/T61 series specific matters only
Post Reply
Message
Author
jronald
Contributing Member
Contributing Member
Posts: 1792
Joined: Sun Apr 13, 2008 7:11 pm
Location: RTP, North Carolina

Uunderboi's T60

#1 Post by jronald » Fri Dec 26, 2014 2:44 pm

Picked up a working pull V5200 Mobo from a forum member. Installed it and attempted to fire it up.
No beeps, all LED light up momentarily then nothing.
Pulled everything that I could, memory, modem, wifi.
If I pull the CMOS battery I get the LEDs, nothing else.
Does not light the battery charge light.

Suggestions?
Ron
I see in my son's eyes, each day, the wonders I have squandered fortunes to possess and have sought my entire lifetime to attain. jrr 09/2011


T400's and T500's
Top
ajkula66
SuperUserGeorge
SuperUserGeorge
Posts: 15737
Joined: Sun Feb 25, 2007 11:28 am
Location: Brodheadsville, Pennsylvania

Re: Uunderboi's T60

#2 Post by ajkula66 » Fri Dec 26, 2014 2:56 pm

Try disconnecting the screen and see what happens.
...Knowledge is a deadly friend when no one sets the rules...(King Crimson)

Cheers,

George (your grouchy retired FlexView farmer)

AARP club members:A31p, T43pSF

Abused daily: R61

PMs requesting personal tech support will be ignored.
Top
jronald
Contributing Member
Contributing Member
Posts: 1792
Joined: Sun Apr 13, 2008 7:11 pm
Location: RTP, North Carolina

Re: Uunderboi's T60

#3 Post by jronald » Fri Dec 26, 2014 3:15 pm

No difference, fan runs for a moment then nada.

Ron
I see in my son's eyes, each day, the wonders I have squandered fortunes to possess and have sought my entire lifetime to attain. jrr 09/2011


T400's and T500's
Top
RealBlackStuff
Admin
Admin
Posts: 17508
Joined: Mon Sep 18, 2006 5:17 am
Location: Mt. Cobb, PA USA
Contact:
Contact RealBlackStuff

Re: Uunderboi's T60

#4 Post by RealBlackStuff » Fri Dec 26, 2014 3:23 pm

Check the fuse immediately right of the LCD connector on the mobo.
If that's gone, you have no backlight.
Does an external monitor work?
Lovely day for a Guinness! (The Real Black Stuff)

Check out The Boardroom for Parts, Mods and Other Services.
Top
jronald
Contributing Member
Contributing Member
Posts: 1792
Joined: Sun Apr 13, 2008 7:11 pm
Location: RTP, North Carolina

Re: Uunderboi's T60

#5 Post by jronald » Fri Dec 26, 2014 4:11 pm

Does not get to the LCD.
Never POST's
LEDs are on just longer than a flicker, it shuts down.
Have to pull all power including the CMOS to get it to do the same again.

Ron
I see in my son's eyes, each day, the wonders I have squandered fortunes to possess and have sought my entire lifetime to attain. jrr 09/2011


T400's and T500's
Top
micrex22
Junior Member
Junior Member
Posts: 332
Joined: Fri Jan 02, 2015 12:22 am
Location: Vancouver, BC, Canada

Re: Uunderboi's T60

#6 Post by micrex22 » Sun Jan 04, 2015 2:02 am

When the LEDs all flash on at first power up, does the power LED stay on afterwards?
A) If the power LED remains on, that means there's a problem affecting with the CPU, FSB or GPU allowing the board not to POST.
B) If the power LED does not remain on, that means it could be an issue with the VRM, power adapter or something preventing it from fully powering on.
Top
Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad T6x Series”

Who is online

Users browsing this forum: No registered users and 0 guests