T61 14" 4:3 moterboard fuses location

Message

kkk · #1 Post by **kkk** » Thu May 28, 2015 9:21 am

42W7872 board doesn't power the backlight - tried another set of LCD, LCD cable and inverter and still no backlight, but I can see the screen is working. So It should be some fuse on the board. According to this guide: http://thinkwiki.de/T61_Sicherungen it shoud be F8 or more likely F7, but it's for wide screen 14" and this one is standard screen. Found F7 and F8 signs on my board - click here for the picture,
but where/which exactly are these fuses F7 and F8 and are they for the same purposes as the ones on the widescreen board?

#2 Post by **RealBlackStuff** » Thu May 28, 2015 10:22 am

F7 is for the backlight (same on all T6x mobos).
It is located to the right of the LCD-cable connector (as in your pic).

kkk · #3 Post by **kkk** » Thu May 28, 2015 2:40 pm

The one with "P" label?

#4 Post by **RealBlackStuff** » Fri May 29, 2015 5:58 am

kkk · #5 Post by **kkk** » Sun May 31, 2015 4:13 am

Thanks, I will reply when replace it.

T61 14" 4:3 moterboard fuses location

T61 14" 4:3 moterboard fuses location

Re: T61 14" 4:3 moterboard fuses location

Re: T61 14" 4:3 moterboard fuses location

Re: T61 14" 4:3 moterboard fuses location

Re: T61 14" 4:3 moterboard fuses location

Who is online