T61/ X61T: Win7x64 - USB3 Drivers and Support?

Performance, hardware, software, general buying and gaming discussion..
Post Reply
Message
Author
crashnburn
ThinkPadder
ThinkPadder
Posts: 1643
Joined: Sat Apr 22, 2006 4:26 pm
Location: TX, USA & Bombay, India

T61/ X61T: Win7x64 - USB3 Drivers and Support?

#1 Post by crashnburn » Sun Jun 21, 2015 11:15 am

T61/ X61T: Win7x64 - USB3 Drivers and Support?

I know both Thinkpads dont have USB3 chips.

A bunch of times I wasnt able to use a Powered USB Hub with 2 x USB3 External drives connected to it. ?

Lack of Power on USB ports of the laptop I can understand but why would a powered hub not be readable? At most it should down step to USB 2 compatibility and work.

Thoughts/ Experiences?

Or is this a Win 7 x 64 issue that needs some generic USB 3 Hub drivers?
T61 8892-02U: 14.1"SXGA+/2.2C2D/4G/XP|Adv Mini Dock|30" Gateway XHD3000 WQXGA via Dual-link DVI
X61T 7767-96U: 12.1"SXGA+/1.6C2D/3G/Vista|Ultrabase
W510 4319-2PU: 15.6"FHD/i7-720QM/4G/Win7Pro64 (for dad)
T43 1875-DLU: 14.1"XGA/1.7PM-740/1G/XP (Old)

precip9
Senior Member
Senior Member
Posts: 539
Joined: Sat Jun 23, 2012 2:26 pm
Location: Dresher, PA

Re: T61/ X61T: Win7x64 - USB3 Drivers and Support?

#2 Post by precip9 » Sun Jun 21, 2015 11:44 am

I know this problem well. A USB 3.0 cable, although it is supposed to be backwards compatible, does not make proper mechanical contact with the USB 2.0 sockets in an X61/X61T. It is a mechanical, not an electrical, problem.

But a USB 3.0 cable does make proper contact with the sockets in the X61 and X61T Ultrabases. Those sockets were manufactured by a different supplier.

To get around this without an Ultrabase, I purchased several USB 2.0 extender cables, 12" in length. The female ends of the extenders make proper contact with the male ends of USB 3.0 cables, and the male ends of the extenders make proper contact with the USB ports in the Thinkpad.

This should do: http://www.ebay.com/itm/111634700400

Later Thinkpads do not have the problem.
W500x3 with T9900, , T400 highnit 1280x800 with P9600, X61sx3, X61Tx3.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “Thinkpad - General HARDWARE/SOFTWARE questions”

Who is online

Users browsing this forum: No registered users and 0 guests