**SOLVED** HOTKEY Utility - Windows 10 - on unsupported machine

[iminj]

I experimentally upgraded from Windows 7 to 10 on an R60. After finding an acceptable graphics driver, I am pleasantly surprised with the results - so far. I am seeking some additional advice from the community to get HOTKEY / OSD working again.

I installed the Lenovo HOTKEY utility for Win10. It isn't officially supported for my machine. I was able to get the OSD to autostart (volume and screen dimmer keys) by manually adding TPONSCR.exe (ver. 6.6.8.0) to the registry:
(HKCU\SOFTWARE\..\..\Current\Version\Run)

Fn Hotkeys are not working, and I am unsure what other features I might be missing. I have the following executable files available in Program Files\Lenovo\ (although they are not presently being executed). I was wondering if anyone can advise what these files do before I experiment with adding any of them to the \run section of my registry:

TPOSD 8.6.1.0 (Is this an updated version of TPONSCR?)
TPOSDSVC 6.3.1.0
tpnf6, 8, and 9
shtcky 2.6.0.0
rmkbdppt 1.0.0.0
dfraddapp 1.0.1.0
dfrconfig 1.0.6.5
dfrctl 1.3.4.0
mkrmsg 1.1.1.0

Thanks!

[iminj]

Since I am running Win10 and the Win10 HotKey on an unsupported device, I am not surprised by the lack of responses.

However, if you are running Win10 on a ThinkPad, I believe you can assist me.

Simply open your Task Manager, and let me know which Hotkey / OSD processes are running as Background Processes on your device. At the present time, mine is running only 2:

TPONSCR and
TPOSDSVC

Thanks!

[Kasm279]

Check here http://forum.thinkpads.com/viewtopic.ph ... 63#p771212
Also, to get scrolling working in Metro apps you'll need this: http://support.lenovo.com/us/en/downloads/ds103454

[iminj]

**SOLVED**

Thanks for the link to an earlier thread about this issue. Lots of helpful info there.

I uninstalled the Windows 10 OSD and Magnifier, and then installed an older Lenovo OSD version 3.81 (in Windows 7 compatibility mode). It all works now!

[Norway Pad]

I did that too last week with two machines. Both a T410 running Win7 and a T420 running Win10. I had to go back to V3.81 on both of them. It has been this way for a long time now, I have no idea why the newer OSD versions refuses to work.