When I turned it on I could see the screen changing shades of gray/black while it booted up but it never displayed any text or the windows xp boot up screen. In the vast experience of the thinkpad community, do you guys think it is just the screen or some connection jarred loose?
If I plug an external monitor into the 15 pin port will it configure automatically like a mouse does?
Is there some test I can do to help identify exactly what got damaged?
Any help would be appreciated. This computer has been a real workhorse and I need the db9 serial interface on this thing. For some reason I don't have much luck with a USB to DB9 adapter on the older control stuff and I have tried many chipsets.
new favorite word "frankenpad"
Seems to me there is likely damage to the display. But, you can start by re-seating the LCD cable at the system board end, and remove the LCD bezel and re-seat the LCD inverter connections. The only other connector is on the back side of the LCD panel where the cable connects. That connection can come loose, but it's usually secured with tape, and a lot of trouble to get to.
- Senior Member
- Posts: 811
- Joined: Fri Oct 17, 2014 8:13 pm
- Location: kingston, ontario, Canada
Yes the LCD shattered. Good LCD can be had from ebay also.
Yes, plug into VGA port and turn on as usual, if not, wait for a minute for computer to settle then hold down Fn and hit F7 once, wait. If not try again in sequence every 30 seconds. F7 has a logo that looks like old fashioned glass CRT outline slash "commputer logo". It is a 3 choices: notebook LCD only, external display only and both together. Bootup default is set in the configuration section after F1 during boot up.
This is unlikely, but if you plug in an external monitor and switch displays using the Fn keys and get the same garbled display, then the GPU on the motherboard is damaged.
Other: mk5 Toughbook cf-19, mk1 Toughbook cf-53
- Similar Topics
- Last post
X1 Carbon 5th Gen - Lock screen and blank screen timers not working when docked to USB-C dock
Last post by dr_st « Mon May 27, 2019 1:10 amReplies: 3
Posted in ThinkPad X1 / X1-Carbon / X1-Extreme and later Seriesby jdc » Fri May 24, 2019 9:47 am » in ThinkPad X1 / X1-Carbon / X1-Extreme and later Series
- 3 Replies
- 1653 Views
Last post by dr_st
Mon May 27, 2019 1:10 am
broken x200 whole lid lcd swap, for a working one, now the used to be perfectly working machine does not work anymore
Last post by unitywithin « Mon Mar 11, 2019 4:09 amReplies: 7
Posted in ThinkPad X200/201/220 and X300/301 Series
- 7 Replies
- 1254 Views
Last post by unitywithin
Mon Mar 11, 2019 4:09 am
- 2 Replies
- 751 Views
Last post by mattster
Tue Jul 02, 2019 3:55 pm
- 4 Replies
- 777 Views
Last post by Jefferson
Sun Mar 17, 2019 7:39 pm
Who is online
Users browsing this forum: woodlandSerenade and 5 guests