my first post here.
My hobby is restoring retro Laptops ..and I recently aquired 2x 600X laptops .
These came with no hard drives (as expected) but luckilly the caddies were present.
The stickers on the topside indicate both were designed for NT and Win98 ...
Nowhere on either unit can I see a windows sticker ..so no keys
There are two IBM stickers which indicate one is Type 2645-7EG and the other Type 2645-850
My hope is to restore them to Factory condition...but sadly they did not come with Setup CDs
..and so far have not been successful in obtaining the discs.
Chances are I would need keys anyway ??
I do have a genuine 98SE CD and key ..and have attempted to install this operating system on a blank partitioned 40 gb IDE drive.
The Install was mostly successful .
but I do get an error which I dont understand ..
When viewing Control panel ..device manager ...
above standard busmastering IDE disc controller I get Intel82371AB/EB PCI Busmaster .. and a yellow exclamation mark ..
This device whatever it is does not install correctly ..(conflict error 15)
there are also issues during the operating system install
I'm using a genuine 98SE CD ..and key
The installation always hangs just after the Time/Date/Region setup ..requiring a reboot to continue.
This may be the hard drive going to sleep for all I know ..nonetheless I do get 98SE installed ..but on checking the hardware installed I always get the same errors .
Video and Audio I can sort out by replacing or installing missing drivers ..but there are other missing or conflicting items ..the worst of which is Intel82371AB/EB PCI Busmaster ..
Can anyone help me here ..
perhaps explaining by what the device is ..and how to correct my problem...?
It may well be that I cannot use a standard win98se cd ..and that I need proprietory IBM installation CDs ..but the chances of obtaining these is slim to none .
Thanks in advance for any help received.
- Admin Emeritus
- Posts: 20280
- Joined: Mon Sep 18, 2006 5:17 am
- Location: Dublin, Éire
It pays to do some searching on the forum:
Intel 82371ab/eb pci bus master IDE controller conflict
Check out The Boardroom for Parts, Mods and Other Services.
- Sophomore Member
- Posts: 197
- Joined: Fri Jan 02, 2015 10:38 am
- Location: Henderson, NV USA
IBM ThinkPad 700, 720C, 750Cs, 360C, 360P, 360CE, 360PE, 730TE, PC110, 365CSD, 365ED, 701Cs, 820, 600X, 770X, 240, T30
IBM RS/6000 43P 150
Lenovo ThinkPad X41T, X61T, X200T, X201T, X220T, X230T, X280
Lenovo ThinkCenter M92p Tiny, M900 Tiny
I guess I'll have to search a little for the supplemental file..as looking at previous discussion ..the link is dead.
btw ..could someone tell me what the physical differences are regarding the 2 thinkpads I have ..
As I said already ..both are 600x but there are some physical differences.
https://thinkpads.com/support/Thinkpad- ... /600x.html has the Windows 98 supplement file near the bottom of the page.
Here are instructions for installing the APM file:
Both Windows 98 Gold and Windows 98 Second Edition
II. Apply APM2APM.reg information onto Windows 98/98SE.
1. Boot the system
2. Open start menu and select "Run ..."
3. Click Run. "Run" windows is open.
4. Type C:\W98SUPP\APM2APM\APM2APM.reg and click [OK].
Following Registry Editor's windows appears.
"Are you sure you want to add the information
C:\W98SUPP\apm2apm\apm2apm.reg to the registory?"
5. Select [Yes].
Successfull windows message is displayed.
6. Select [OK] to exit the registory editor screen.
I've hopefully sent Thinkpad Maniac a PM.
maybe I will get the OEM factory CDs afterall..
..but I'd still prefer an IBM factory restore .
Hopefully Thinkpad Maniac will be able to help with this in a couple of days.
and thanks again Bill
- Similar Topics
- Last post
Who is online
Users browsing this forum: No registered users and 7 guests